AutoDefects
English

Peugeot 208 2022: reliability

38% more mechanical failures than the class

852 MOT tests of Peugeot 208 cars first registered in 2022: 2.6% failed for a mechanical defect; the class median at the same age and mileage is 1.9%.

Mechanical failure rate
2.6%
Class median, same age and mileage
1.9%
Failed MOT (any reason)
6.9%
MOT tests
852
Recalls
13

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km7051.7%1.4%
50-100k km1285.5%4.4%
100-150k km1816.7%—%
150k+ km10.0%—%

What fails on this year

SystemMechanical fail
Suspension and wheels1.9%
Brakes0.6%
Engine, exhaust and emissions0.1%
Steering0.0%
Body, chassis and corrosion0.1%
Seat belts and airbags0.0%
Lights and electrics (wear)1.3%
Tyres (wear)2.5%
Wipers and windscreen (wear)1.8%
Other and plates (wear)0.1%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2008–2026

    The vehicle may have contact, or insufficient clearance (< 10 mm), between the petrol particulate filter pipe and the terminal protection cap of the 48 V belt starter generator. In wet conditions, the insufficient…

    Full text

    The vehicle may have contact, or insufficient clearance (< 10 mm), between the petrol particulate filter pipe and the terminal protection cap of the 48 V belt starter generator. In wet conditions, the insufficient clearance and possible contact between these components can lead to water infiltration, causing an electric arc, that could trigger a thermal event, such as overheating, which may lead to fire.

    SR/00819/26 ↗
  • EU Safety GateSerious2008–2025

    The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.

    SR/02936/25 ↗
  • EU Safety Gate2008–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Full text

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02658/25 ↗
  • EU Safety Gate2008–2024

    The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the…

    Full text

    The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the deactivation of stability control due to damage to the pressure sensor. The brake fluid could come into contact with the printed circuit board and result in the deactivation of all control functions (including the anti-lock system and electronic brake force distribution).

    SR/02104/25 ↗
  • EU Safety GateSerious2022–2024

    The oil jet cooling nozzles may be damaged. Failure to cool the crankshaft and/or pistons can cause damage to them and result in the engine stalling. This can lead to a hole forming in the engine casing, causing oil…

    Full text

    The oil jet cooling nozzles may be damaged. Failure to cool the crankshaft and/or pistons can cause damage to them and result in the engine stalling. This can lead to a hole forming in the engine casing, causing oil leaks onto the exhaust pipe. This can cause a fire to start in the engine compartment, causing the vehicle to catch fire.

    SR/00882/25 ↗
  • EU Safety Gate2008–2023

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…

    Full text

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.

    SR/01450/25 ↗
Show 7 more recalls
  • EU Safety Gate2008–2022

    In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    A12/02824/24 ↗
  • EU Safety Gate2008–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01870/23 ↗
  • EU Safety GateSerious2021, 2022

    Due to damage to the heating/ventilation/air conditioning (HVAC) harness caused by contact with the clutch pedal, the air conditioning may be activated automatically. This could lead to a fire as a result of a short…

    Full text

    Due to damage to the heating/ventilation/air conditioning (HVAC) harness caused by contact with the clutch pedal, the air conditioning may be activated automatically. This could lead to a fire as a result of a short circuit in the wires.

    A12/00439/23 ↗
  • EU Safety Gate2020–2022

    The locking nuts of the steering tie rods may not be properly tightened. This could lead to loss of control over the vehicle, creating a risk of an accident.

    A12/00246/23 ↗
  • EU Safety Gate2022

    Improper torque on wheel/axle connection may lead to the loss of connection between a wheel and the axle (front and rear), or a rupture of the rear brake line/hose or an unexpected opening of a door while driving can…

    Full text

    Improper torque on wheel/axle connection may lead to the loss of connection between a wheel and the axle (front and rear), or a rupture of the rear brake line/hose or an unexpected opening of a door while driving can occur, increasing the risk of injury.

    A12/01494/22 ↗
  • EU Safety GateSerious2022

    The high voltage wiring harness may be defective. This could result in an increased risk of fire.

    A12/01307/22 ↗
  • EU Safety Gate2008–2037

    Wrong engine calibration tuning might cause the exhaust emissions' level of nitrogen oxides (NOx) to exceed regulated limits. Nitrogen oxides are harmful to human health and the environment.

    A12/1594/19 ↗