Peugeot 208 2022: fiabilidad
852 inspecciones MOT de Peugeot 208 matriculados por primera vez en 2022: el 2,6 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 1,9 %.
- Tasa de fallo mecánico
- 2,6%
- Mediana de la clase, misma edad y kilometraje
- 1,9%
- No pasó la MOT (cualquier motivo)
- 6,9%
- inspecciones MOT
- 852
- Llamadas a revisión
- 13
Qué falla según el kilometraje
| Kilometraje | Inspecciones | Fallo mecánico | Mediana de la clase |
|---|---|---|---|
| 0-50k km | 705 | 1,7% | 1,4% |
| 50-100k km | 128 | 5,5% | 4,4% |
| 100-150k km | 18 | 16,7% | —% |
| 150k+ km | 1 | 0,0% | —% |
Qué falla en este año
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
The vehicle may have contact, or insufficient clearance (< 10 mm), between the petrol particulate filter pipe and the terminal protection cap of the 48 V belt starter generator. In wet conditions, the insufficient…
SR/00819/26 ↗Texto completo
The vehicle may have contact, or insufficient clearance (< 10 mm), between the petrol particulate filter pipe and the terminal protection cap of the 48 V belt starter generator. In wet conditions, the insufficient clearance and possible contact between these components can lead to water infiltration, causing an electric arc, that could trigger a thermal event, such as overheating, which may lead to fire.
The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.
SR/02936/25 ↗Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02658/25 ↗Texto completo
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the…
SR/02104/25 ↗Texto completo
The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the deactivation of stability control due to damage to the pressure sensor. The brake fluid could come into contact with the printed circuit board and result in the deactivation of all control functions (including the anti-lock system and electronic brake force distribution).
The oil jet cooling nozzles may be damaged. Failure to cool the crankshaft and/or pistons can cause damage to them and result in the engine stalling. This can lead to a hole forming in the engine casing, causing oil…
SR/00882/25 ↗Texto completo
The oil jet cooling nozzles may be damaged. Failure to cool the crankshaft and/or pistons can cause damage to them and result in the engine stalling. This can lead to a hole forming in the engine casing, causing oil leaks onto the exhaust pipe. This can cause a fire to start in the engine compartment, causing the vehicle to catch fire.
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…
SR/01450/25 ↗Texto completo
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.
Mostrar 7 llamadas más
In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
A12/02824/24 ↗A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01870/23 ↗Due to damage to the heating/ventilation/air conditioning (HVAC) harness caused by contact with the clutch pedal, the air conditioning may be activated automatically. This could lead to a fire as a result of a short…
A12/00439/23 ↗Texto completo
Due to damage to the heating/ventilation/air conditioning (HVAC) harness caused by contact with the clutch pedal, the air conditioning may be activated automatically. This could lead to a fire as a result of a short circuit in the wires.
The locking nuts of the steering tie rods may not be properly tightened. This could lead to loss of control over the vehicle, creating a risk of an accident.
A12/00246/23 ↗Improper torque on wheel/axle connection may lead to the loss of connection between a wheel and the axle (front and rear), or a rupture of the rear brake line/hose or an unexpected opening of a door while driving can…
A12/01494/22 ↗Texto completo
Improper torque on wheel/axle connection may lead to the loss of connection between a wheel and the axle (front and rear), or a rupture of the rear brake line/hose or an unexpected opening of a door while driving can occur, increasing the risk of injury.
The high voltage wiring harness may be defective. This could result in an increased risk of fire.
A12/01307/22 ↗Wrong engine calibration tuning might cause the exhaust emissions' level of nitrogen oxides (NOx) to exceed regulated limits. Nitrogen oxides are harmful to human health and the environment.
A12/1594/19 ↗