AutoDefects
Español

Peugeot 208 2017: fiabilidad

7 % más fallos mecánicos que su clase

17.563 inspecciones MOT de Peugeot 208 matriculados por primera vez en 2017: el 14,4 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 13,5 %.

Tasa de fallo mecánico
14,4%
Mediana de la clase, misma edad y kilometraje
13,5%
No pasó la MOT (cualquier motivo)
26,6%
inspecciones MOT
17.563
Llamadas a revisión
17

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km43146,9%6,9%
50-100k km948414,8%13,8%
100-150k km318721,4%19,9%
150k+ km57826,3%23,1%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas3,1%
Frenos3,7%
Motor, escape y emisiones2,4%
Dirección0,4%
Carrocería, bastidor y corrosión7,7%
Cinturones y airbags0,3%
Luces y electricidad (desgaste)10,9%
Neumáticos (desgaste)6,9%
Escobillas y parabrisas (desgaste)2,4%
Otros y matrículas (desgaste)0,1%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety GateGrave2008–2026

    The vehicle may have contact, or insufficient clearance (< 10 mm), between the petrol particulate filter pipe and the terminal protection cap of the 48 V belt starter generator. In wet conditions, the insufficient…

    Texto completo

    The vehicle may have contact, or insufficient clearance (< 10 mm), between the petrol particulate filter pipe and the terminal protection cap of the 48 V belt starter generator. In wet conditions, the insufficient clearance and possible contact between these components can lead to water infiltration, causing an electric arc, that could trigger a thermal event, such as overheating, which may lead to fire.

    SR/00819/26 ↗
  • EU Safety GateGrave2008–2025

    The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.

    SR/02936/25 ↗
  • EU Safety Gate2008–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Texto completo

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02658/25 ↗
  • EU Safety Gate2008–2024

    The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the…

    Texto completo

    The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the deactivation of stability control due to damage to the pressure sensor. The brake fluid could come into contact with the printed circuit board and result in the deactivation of all control functions (including the anti-lock system and electronic brake force distribution).

    SR/02104/25 ↗
  • EU Safety Gate2008–2023

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…

    Texto completo

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.

    SR/01450/25 ↗
  • EU Safety Gate2008–2022

    In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    A12/02824/24 ↗
Mostrar 9 llamadas más
  • EU Safety Gate2008–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01870/23 ↗
  • EU Safety Gate2008–2019

    Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to…

    Texto completo

    Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    A12/00046/22 ↗
  • EU Safety Gate2008–2018

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…

    Texto completo

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01184/21 ↗
  • EU Safety Gate2013–2017

    The vacuum pump may be damaged due to material abrasion of the cog belt.As a result, the braking assistance could be reduced or lost, increasing the risk of an accident.

    A12/01505/20 ↗
  • EU Safety Gate2008–2019

    The rear-axle fixing screws may be defective and could break.This may result in loss of the rear axle while driving, increasing the risk of an accident.

    A12/00016/19 ↗
  • EU Safety Gate2008–2037

    Wrong engine calibration tuning might cause the exhaust emissions' level of nitrogen oxides (NOx) to exceed regulated limits. Nitrogen oxides are harmful to human health and the environment.

    A12/1594/19 ↗
  • EU Safety Gate2017

    The front wheel axle assembly may be incorrectly tightened. This may lead to a loss of connection between the steering and the front wheel axle, resulting in an accident causing injury to vehicle occupants or other road…

    Texto completo

    The front wheel axle assembly may be incorrectly tightened. This may lead to a loss of connection between the steering and the front wheel axle, resulting in an accident causing injury to vehicle occupants or other road users.

    A12/0624/18 ↗
  • EU Safety Gate2017

    Screws anchoring the alternator and the air conditioning compressor may not be tightened to the correct torque. As a result, the alternator or the compressor could detach from the engine and fall onto the road.

    A12/0487/18 ↗
  • EU Safety Gate2017

    null The fixing screws of the wheel axles on the rear cross member may not be tightened correctly. As a result, they could loosen leading to a loss of vehicle control while driving.

    A12/1726/17 ↗