AutoDefects
English

Peugeot 208 2019: reliability

33% more mechanical failures than the class

17,052 MOT tests of Peugeot 208 cars first registered in 2019: 7.5% failed for a mechanical defect; the class median at the same age and mileage is 5.6%.

Mechanical failure rate
7.5%
Class median, same age and mileage
5.6%
Failed MOT (any reason)
18.7%
MOT tests
17,052
Recalls
18

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km9,5274.9%3.6%
50-100k km6,68610.3%7.6%
100-150k km73013.6%12.8%
150k+ km10920.2%14.3%

What fails on this year

SystemMechanical fail
Suspension and wheels1.2%
Brakes2.3%
Engine, exhaust and emissions1.1%
Steering0.1%
Body, chassis and corrosion3.6%
Seat belts and airbags0.2%
Lights and electrics (wear)8.7%
Tyres (wear)5.7%
Wipers and windscreen (wear)1.3%
Other and plates (wear)0.1%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2008–2026

    The vehicle may have contact, or insufficient clearance (< 10 mm), between the petrol particulate filter pipe and the terminal protection cap of the 48 V belt starter generator. In wet conditions, the insufficient…

    Full text

    The vehicle may have contact, or insufficient clearance (< 10 mm), between the petrol particulate filter pipe and the terminal protection cap of the 48 V belt starter generator. In wet conditions, the insufficient clearance and possible contact between these components can lead to water infiltration, causing an electric arc, that could trigger a thermal event, such as overheating, which may lead to fire.

    SR/00819/26 ↗
  • EU Safety GateSerious2008–2025

    The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.

    SR/02936/25 ↗
  • EU Safety Gate2008–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Full text

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02658/25 ↗
  • EU Safety Gate2008–2024

    The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the…

    Full text

    The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the deactivation of stability control due to damage to the pressure sensor. The brake fluid could come into contact with the printed circuit board and result in the deactivation of all control functions (including the anti-lock system and electronic brake force distribution).

    SR/02104/25 ↗
  • EU Safety Gate2008–2023

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…

    Full text

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.

    SR/01450/25 ↗
  • EU Safety Gate2008–2022

    In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    A12/02824/24 ↗
Show 9 more recalls
  • EU Safety Gate2008–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01870/23 ↗
  • EU Safety Gate2019, 2020

    The open circuit detecting system on the high voltage circuit may be over-sensitive and could unnecessarily cut off the electric current. As a result, the vehicle may lose power during driving, increasing the risk of an…

    Full text

    The open circuit detecting system on the high voltage circuit may be over-sensitive and could unnecessarily cut off the electric current. As a result, the vehicle may lose power during driving, increasing the risk of an accident. Moreover, it could be impossible to restart or move the vehicle for several minutes.

    A12/00570/22 ↗
  • EU Safety Gate2019

    Improper rings used for rocker panel protectors can cause them to come loose and fall on the road, posing a risk to traffic.Contact may occur between the vacuum hose and the surrounding parts. This may result in loss of…

    Full text

    Improper rings used for rocker panel protectors can cause them to come loose and fall on the road, posing a risk to traffic.Contact may occur between the vacuum hose and the surrounding parts. This may result in loss of the braking assistance, increasing the risk of an accident.The bonnet locking screws are insufficiently tightened. As a result, the bonnet could become detached while driving, increasing the risk of an accident.

    A12/00418/22 ↗
  • EU Safety Gate2008–2019

    Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to…

    Full text

    Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    A12/00046/22 ↗
  • EU Safety Gate2019, 2020

    The high-pressure pump has not been tightened to the engine with the correct torque. As a result, fuel may leak onto the road, posing a risk to the following traffic.

    A12/01462/20 ↗
  • EU Safety Gate2019, 2020

    The wheel alignment of the front axle may be incorrect.This may result in unstable road handling of the vehicle, increasing the risk of an accident.

    A12/01171/20 ↗
  • EU Safety Gate2019

    The fixings of the rear shock absorbers are not properly tightened. Consequently, the shock absorbers could fall while the vehicle is in movement increasing the risk of accident to incoming traffic.

    A12/01021/20 ↗
  • EU Safety Gate2019

    The front wheelhouse trims may be insufficiently fastened.As a result, they may become detached in motion, posing a risk to the following traffic.

    A12/00762/20 ↗
  • EU Safety GateSerious2019

    The steering column may not be manufactured according to the specifications.This may result in steering failure and loss of control over the vehicle, increasing the risk of an accident.

    A12/00751/20 ↗