Nissan Micra 2013: Zuverlässigkeit
11.482 MOT-Prüfungen von Nissan Micra mit Erstzulassung 2013: 22,1% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 20,6%.
- Technische Mängelquote
- 22,1%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 20,6%
- Durchgefallen (jeder Grund)
- 33,4%
- MOT-Prüfungen
- 11.482
- Rückrufe
- 3
Was nach Laufleistung ausfällt
| Laufleistung | Prüfungen | Technische Mängel | Klassenmedian |
|---|---|---|---|
| 0-50k km | 2.288 | 12,7% | 9,0% |
| 50-100k km | 5.402 | 21,1% | 19,7% |
| 100-150k km | 2.815 | 28,2% | 27,6% |
| 150k+ km | 977 | 32,0% | 32,7% |
Was bei diesem Baujahr ausfällt
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
null The push engine start switch may remain in the pressed position and not return after switching the engine on. If the vehicle continues to be driven in this condition, the emergency engine stop function may operate…
A12/0850/15 ↗Volltext
null The push engine start switch may remain in the pressed position and not return after switching the engine on. If the vehicle continues to be driven in this condition, the emergency engine stop function may operate and cause the engine to stop unexpectedly.
null Due to an Engine Control Module (ECM) software error, under certain very limited engine start conditions, the ECM may set an incorrect engine throttle valve position. As a result, at engine speeds in excess of 3600…
A12/0430/15 ↗Volltext
null Due to an Engine Control Module (ECM) software error, under certain very limited engine start conditions, the ECM may set an incorrect engine throttle valve position. As a result, at engine speeds in excess of 3600 rpm, the vehicle may briefly accelerate unexpectedly.
null The driver airbag inflator may have been assembled incorrectly. In the event of deployment of the airbag, the gas flow path may be blocked increasing the internal pressure in the inflator. As a result, the driver…
A12/1742/14 ↗Volltext
null The driver airbag inflator may have been assembled incorrectly. In the event of deployment of the airbag, the gas flow path may be blocked increasing the internal pressure in the inflator. As a result, the driver airbag inflator casing may crack and fragment causing injuries.