AutoDefects
Deutsch

Kleine SUVs

Suzuki Jimny: Zuverlässigkeit

Bei 24.038 britischen MOT-Prüfungen fielen 24,5% der Suzuki Jimny wegen eines technischen oder Karosseriemangels durch. Median eines kleinen SUVs gleichen Alters und gleicher Laufleistung: 24,1%.

71von 100DurchschnittIm Klassendurchschnitt
Beste Baujahre
2019, 2020, 2021
Baujahre mit den meisten Mängeln
2016, 2017, 2018
Schwachstelle bei hoher Laufleistung
Karosserie, Rahmen und Rost, Bremsen, Motor, Abgasanlage und Emissionen
Amtliche Rückrufe
6 Rückrufe, davon 1 ernst
Technische Mängelquote
24,5%
Klassenmedian, gleiches Alter und gleiche Laufleistung
24,1%
MOT-Prüfungen
24.038
Beschwerden von US-Haltern
0

MOT-Ergebnisse nach Prüfjahr

Alle Fahrzeuge dieses Modells bei der Prüfung des jeweiligen Jahres im Vergleich mit der Klasse bei gleichem Alter und gleicher Laufleistung. Zeigt, ob das Modell mit dem Alter mithält.

PrüfjahrPrüfungenTechnische MängelKlassenmedianAlle Mängel
202424.03824,5%24,1%30,8%
202324.89623,7%23,7%30,2%

Mängelquote nach Jahr der Erstzulassung

Technische Mängelquote bei der MOT-Prüfung 2024 nach Jahr der Erstzulassung, verglichen mit dem Klassenmedian bei gleichem Alter und gleicher Laufleistung.

Dieses ModellKlassenmedian
0%13%26%2004: 33,5%2004 Klassenmedian: 32,1%042005: 34,1%2005 Klassenmedian: 30,6%052006: 34,4%2006 Klassenmedian: 35,5%062007: 31,6%2007 Klassenmedian: 33,2%072008: 27,2%2008 Klassenmedian: 29,5%082009: 22,7%2009 Klassenmedian: 28,9%092010: 27,0%2010 Klassenmedian: 27,7%102011: 25,2%2011 Klassenmedian: 25,5%112012: 20,7%2012 Klassenmedian: 22,2%122013: 18,1%2013 Klassenmedian: 21,7%132014: 16,2%2014 Klassenmedian: 16,0%142015: 19,7%2015 Klassenmedian: 13,0%152016: 14,7%2016 Klassenmedian: 9,5%162017: 14,0%2017 Klassenmedian: 7,4%172018: 12,7%2018 Klassenmedian: 4,7%182019: 2,3%2019 Klassenmedian: 4,1%192020: 2,0%2020 Klassenmedian: 2,7%202021: 1,0%2021 Klassenmedian: 2,0%21
JahrPrüfungenTechnische MängelKlassenmedianAlle MängelRückrufe
20213991,0%2,0%6,0%0
20208842,0%2,7%8,4%1
20191.1922,3%4,1%7,1%1
201849612,7%4,7%19,8%2
201795814,0%7,4%18,7%0
20161.04014,7%9,5%19,6%0
201597719,7%13,0%25,8%0
201485916,2%16,0%22,0%2
201391018,1%21,7%23,6%2
201291420,7%22,2%27,2%1
201177725,2%25,5%32,1%0
201067527,0%27,7%32,0%0
200983922,7%28,9%29,1%0
20081.16927,2%29,5%33,8%0
20071.64931,6%33,2%37,4%0
20061.56234,4%35,5%41,5%0
20051.72234,1%30,6%40,4%0
20042.04133,5%32,1%40,6%0
Ältere Baujahre (6)
JahrPrüfungenTechnische MängelKlassenmedianAlle MängelRückrufe
20031.71631,9%32,3%38,9%0
20021.33632,1%32,6%39,4%0
200186631,5%31,2%38,7%0
200066232,3%33,2%40,3%0
199930936,3%36,3%42,1%0
19986633,3%37,1%37,9%0

Was nach Laufleistung ausfällt

Anteil der Prüfungen, die an der jeweiligen Baugruppe scheiterten. Verschleißteile (Lampen, Reifen, Wischer, Kennzeichen) zählen nicht zum Zuverlässigkeitswert.

Baugruppe0-50k km50-100k km100-150k km150k+ km
Technische Mängel7,7% (5,2)20,0% (19,6)31,4% (30,7)35,8% (36,8)
Prüfungen4.7636.6987.0135.564
Fahrwerk und Räder4,9% (0,5)9,3% (1,8)12,6% (5,0)15,1% (12,4)
Bremsen2,3% (1,5)8,2% (4,5)14,2% (6,2)16,2% (9,0)
Motor, Abgasanlage und Emissionen0,5% (0,4)3,5% (0,7)8,4% (2,1)11,7% (4,5)
Lenkung0,1% (0,1)0,9% (0,3)1,9% (0,8)2,3% (1,8)
Karosserie, Rahmen und Rost0,7% (0,1)5,1% (0,4)12,6% (1,7)15,9% (4,3)
Gurte und Airbags0,2% (0,2)1,7% (0,3)4,2% (0,6)5,7% (0,9)
Licht und Elektrik (Verschleiß)2,5% (1,9)5,5% (3,7)12,9% (8,8)16,9% (14,8)
Reifen (Verschleiß)0,8% (3,1)1,7% (5,0)2,0% (6,7)2,9% (7,7)
Wischer und Scheibe (Verschleiß)3,0% (2,6)4,9% (3,2)5,7% (3,9)6,7% (5,2)
Sonstiges und Kennzeichen (Verschleiß)0,2% (0,1)0,3% (0,1)0,7% (0,2)0,8% (0,4)

(…) = Klassenmedian, gleiches Alter und gleiche Laufleistung

Checkliste für die Werkstatt vor dem Kauf

Abgeleitet aus den Baugruppen, bei denen dieses Modell ab 100.000 km häufiger durchfällt als seine Klasse, und aus offenen Rückrufen.

  1. Karosserie und Rahmen: Schweller, Hilfsrahmen, Wagenheberaufnahmen und Boden auf Rost und Reparaturspuren prüfen.
  2. Bremsen: Scheiben und Beläge messen, Bremsleitungen und -schläuche auf Rost prüfen, Handbremse und ABS-Leuchte testen.
  3. Motor und Abgas: auf Öl- und Kühlmittelverlust, undichte oder rostige Abgasanlage und Warnleuchten achten; beim Diesel DPF/AGR und Rauch prüfen.
  4. Rückrufe: 1 ernste Rückrufe betreffen dieses Modell – lassen Sie sich die Erledigung nachweisen
    • A12/00955/21 · 2020 · Due to improper design, the lead wires in the driver and passenger side door harness could be damaged or cut by the repeated motion of…

    Ein bestimmtes Auto per FIN auf den offiziellen Seiten prüfen: NHTSA (US) · DVSA (UK)

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety Gate2018, 2019

    The resinous material of the fuel pump is not dense enough, can deform and come into contact with the pump housing. This can cause the pump to fail, potentially resulting in the engine stalling and increasing the risk…

    Volltext

    The resinous material of the fuel pump is not dense enough, can deform and come into contact with the pump housing. This can cause the pump to fail, potentially resulting in the engine stalling and increasing the risk of accidents and injuries.

    A12/00885/24 ↗
  • EU Safety GateErnst2020

    Due to improper design, the lead wires in the driver and passenger side door harness could be damaged or cut by the repeated motion of opening and closing the doors. This may cause the curtain and side airbags to not…

    Volltext

    Due to improper design, the lead wires in the driver and passenger side door harness could be damaged or cut by the repeated motion of opening and closing the doors. This may cause the curtain and side airbags to not deploy correctly in the event of an accident, increasing the risk of injury.

    A12/00955/21 ↗
  • EU Safety Gate2018

    The fuel feeding impeller in the fuel pump, which is made of resin material, may be swollen and deformed due to the insufficient material density caused by the improper injection molding process. Consequently, the…

    Volltext

    The fuel feeding impeller in the fuel pump, which is made of resin material, may be swollen and deformed due to the insufficient material density caused by the improper injection molding process. Consequently, the impeller may interfere with the fuel pump housing, resulting in the fuel pump malfunction. As a result, the engine could stop while driving, increasing the risk of an accident.

    A12/00956/21 ↗
  • EU Safety Gate2013, 2014

    null The brake booster does not work adequately and thus the brake pedal operation can be harder, consequently the stopping distance can be longer.

    A12/1134/16 ↗
  • EU Safety Gate

    null Resin fragments inside the brake hydraulic control unit might get stuck in the hydraulic control valve which could lead to the anti-lock braking system (ABS) not working properly.

    A12/1047/15 ↗
  • EU Safety Gate2012–2014

    null The fastening bolts of the joint between the lateral rod and the axle housing in the front and rear suspension systems may become loose. In the worst case, the bolts can drop off. If this happens, and if the car is…

    Volltext

    null The fastening bolts of the joint between the lateral rod and the axle housing in the front and rear suspension systems may become loose. In the worst case, the bolts can drop off. If this happens, and if the car is used in this condition, the operation of the steering might be affected.

    A12/0834/14 ↗