Kleine SUVs
Peugeot 2008: Zuverlässigkeit
Bei 132.119 britischen MOT-Prüfungen fielen 15,6% der Peugeot 2008 wegen eines technischen oder Karosseriemangels durch. Median eines kleinen SUVs gleichen Alters und gleicher Laufleistung: 11,9%.
- Beste Baujahre
- —
- Baujahre mit den meisten Mängeln
- 2018, 2019, 2021
- Schwachstelle bei hoher Laufleistung
- Karosserie, Rahmen und Rost, Fahrwerk und Räder, Motor, Abgasanlage und Emissionen
- Amtliche Rückrufe
- 32 Rückrufe, davon 10 ernst
- Technische Mängelquote
- 15,6%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 11,9%
- MOT-Prüfungen
- 132.119
- Beschwerden von US-Haltern
- 0
MOT-Ergebnisse nach Prüfjahr
Alle Fahrzeuge dieses Modells bei der Prüfung des jeweiligen Jahres im Vergleich mit der Klasse bei gleichem Alter und gleicher Laufleistung. Zeigt, ob das Modell mit dem Alter mithält.
| Prüfjahr | Prüfungen | Technische Mängel | Klassenmedian | Alle Mängel |
|---|---|---|---|---|
| 2024 | 132.119 | 15,6% | 11,9% | 26,1% |
| 2023 | 115.242 | 14,4% | 10,8% | 24,5% |
Mängelquote nach Jahr der Erstzulassung
Technische Mängelquote bei der MOT-Prüfung 2024 nach Jahr der Erstzulassung, verglichen mit dem Klassenmedian bei gleichem Alter und gleicher Laufleistung.
| Jahr | Prüfungen | Technische Mängel | Klassenmedian | Alle Mängel | Rückrufe |
|---|---|---|---|---|---|
| 2022 | 801 | 2,3% | 2,1% | 7,7% | 13 |
| 2021 | 17.607 | 3,8% | 2,4% | 14,0% | 11 |
| 2020 | 11.566 | 4,3% | 3,0% | 15,2% | 13 |
| 2019 | 15.326 | 7,0% | 4,3% | 16,6% | 15 |
| 2018 | 16.025 | 11,3% | 6,8% | 22,9% | 14 |
| 2017 | 16.604 | 16,4% | 11,2% | 27,9% | 15 |
| 2016 | 18.296 | 21,9% | 15,2% | 31,9% | 18 |
| 2015 | 16.942 | 25,2% | 21,1% | 35,6% | 20 |
| 2014 | 15.546 | 28,9% | 26,0% | 39,2% | 18 |
| 2013 | 3.347 | 29,9% | 29,3% | 40,3% | 19 |
Was nach Laufleistung ausfällt
Anteil der Prüfungen, die an der jeweiligen Baugruppe scheiterten. Verschleißteile (Lampen, Reifen, Wischer, Kennzeichen) zählen nicht zum Zuverlässigkeitswert.
(…) = Klassenmedian, gleiches Alter und gleiche Laufleistung
Checkliste für die Werkstatt vor dem Kauf
Abgeleitet aus den Baugruppen, bei denen dieses Modell ab 100.000 km häufiger durchfällt als seine Klasse, und aus offenen Rückrufen.
- Karosserie und Rahmen: Schweller, Hilfsrahmen, Wagenheberaufnahmen und Boden auf Rost und Reparaturspuren prüfen.
- Fahrwerk und Räder: Querlenker, Buchsen, Traggelenke, Federn und Stoßdämpfer auf Spiel, Risse und Undichtigkeiten prüfen; auf ungleichmäßigen Reifenverschleiß achten.
- Motor und Abgas: auf Öl- und Kühlmittelverlust, undichte oder rostige Abgasanlage und Warnleuchten achten; beim Diesel DPF/AGR und Rauch prüfen.
- Rückrufe: 5 ernste Rückrufe betreffen dieses Modell – lassen Sie sich die Erledigung nachweisen
- SR/01379/26 · 2008–2026 · Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic…
- SR/00819/26 · 2008–2026 · The vehicle may have contact, or insufficient clearance (< 10 mm), between the petrol particulate filter pipe and the terminal protection…
- SR/02936/25 · 2008–2025 · The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may…
- SR/02876/25 · 2023–2025 · The fuel tank may not be leakproof and could allow fuel to leak out. In the event of leakage, leaking fuel may be ignited on hot components…
- A12/01307/22 · 2022 · The high voltage wiring harness may be defective. This could result in an increased risk of fire.
Ein bestimmtes Auto per FIN auf den offiziellen Seiten prüfen: NHTSA (US) · DVSA (UK)
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead…
SR/01379/26 ↗Volltext
Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead to continuous power supply and overheating due to a blocked relay and cause a fire.
The vehicle may have contact, or insufficient clearance (< 10 mm), between the petrol particulate filter pipe and the terminal protection cap of the 48 V belt starter generator. In wet conditions, the insufficient…
SR/00819/26 ↗Volltext
The vehicle may have contact, or insufficient clearance (< 10 mm), between the petrol particulate filter pipe and the terminal protection cap of the 48 V belt starter generator. In wet conditions, the insufficient clearance and possible contact between these components can lead to water infiltration, causing an electric arc, that could trigger a thermal event, such as overheating, which may lead to fire.
The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.
SR/02936/25 ↗The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03153/25 ↗Volltext
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
The fuel tank may not be leakproof and could allow fuel to leak out. In the event of leakage, leaking fuel may be ignited on hot components or from sparks and catch fire.
SR/02876/25 ↗Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02658/25 ↗Volltext
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
26 weitere Rückrufe anzeigen
The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the…
SR/02104/25 ↗Volltext
The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the deactivation of stability control due to damage to the pressure sensor. The brake fluid could come into contact with the printed circuit board and result in the deactivation of all control functions (including the anti-lock system and electronic brake force distribution).
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…
SR/01450/25 ↗Volltext
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.
Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory…
SR/00434/25 ↗Volltext
Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
When there is a specific error in the vacuum circuit and after 6 seconds with the brake applied, the electronic control unit send an "Invalid Value" to the hydraulic brake compensation (HBC). This can cause the HBC to…
A12/03179/24 ↗Volltext
When there is a specific error in the vacuum circuit and after 6 seconds with the brake applied, the electronic control unit send an "Invalid Value" to the hydraulic brake compensation (HBC). This can cause the HBC to stop functioning, leading to a reduction in braking efficiency. This increases the risk of accidents and injuries.
In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
A12/02824/24 ↗A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01870/23 ↗Improper torque on wheel/axle connection may lead to the loss of connection between a wheel and the axle (front and rear), or a rupture of the rear brake line/hose or an unexpected opening of a door while driving can…
A12/01494/22 ↗Volltext
Improper torque on wheel/axle connection may lead to the loss of connection between a wheel and the axle (front and rear), or a rupture of the rear brake line/hose or an unexpected opening of a door while driving can occur, increasing the risk of injury.
The high voltage wiring harness may be defective. This could result in an increased risk of fire.
A12/01307/22 ↗The open circuit detecting system on the high voltage circuit may be over-sensitive and could unnecessarily cut off the electric current. As a result, the vehicle may lose power during driving, increasing the risk of an…
A12/00570/22 ↗Volltext
The open circuit detecting system on the high voltage circuit may be over-sensitive and could unnecessarily cut off the electric current. As a result, the vehicle may lose power during driving, increasing the risk of an accident. Moreover, it could be impossible to restart or move the vehicle for several minutes.
Due to an error in the manufacturing process, a short circuit may occur in the battery located under the front bonnet.This could increase the risk of fire while the vehicle is being charged or on is in motion.
A12/00171/22 ↗Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to…
A12/00046/22 ↗Volltext
Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01184/21 ↗Volltext
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The vacuum pump may be damaged due to material abrasion of the cog belt.As a result, the braking assistance could be reduced or lost, increasing the risk of an accident.
A12/01505/20 ↗The sub-frame may corrode and fracture due to defective anti-rust treatment.This can lead to loss of control over the vehicle, increasing the risk of an accident.
A12/01193/20 ↗The rear-axle fixing screws may be defective and could break.This may result in loss of the rear axle while driving, increasing the risk of an accident.
A12/00016/19 ↗A plastic component (spacer) included in the exhaust line could damage the Diesel Particle Filter (DPF) under certain conditions, creating small cracks or holes. Depending on the amount of damage, the particulate…
A12/1593/19 ↗Volltext
A plastic component (spacer) included in the exhaust line could damage the Diesel Particle Filter (DPF) under certain conditions, creating small cracks or holes. Depending on the amount of damage, the particulate emission level could exceed regulatory limits.
Wrong engine calibration tuning might cause the exhaust emissions' level of nitrogen oxides (NOx) to exceed regulated limits. Nitrogen oxides are harmful to human health and the environment.
A12/1594/19 ↗The rear axle connection may be inadequate and could break. As a result, the rear axle may be disconnected from the vehicle, increasing the risk of an accident.
A12/0975/19 ↗null An internal component of an electric relay is faulty. As a consequence, the starter may not be activated, the starter control may be constantly blocked or the starter may operate unexpectedly. This could lead to…
A12/0571/17 ↗Volltext
null An internal component of an electric relay is faulty. As a consequence, the starter may not be activated, the starter control may be constantly blocked or the starter may operate unexpectedly. This could lead to unexpected movement of the vehicle or fire caused by damage to the starter due to overheating.
null A problem with a component of the gearbox actuator could prevent gear changing or cause the driver to change to the wrong gear. This could lead to the vehicle moving in the opposite direction to that intended by…
A12/0479/17 ↗Volltext
null A problem with a component of the gearbox actuator could prevent gear changing or cause the driver to change to the wrong gear. This could lead to the vehicle moving in the opposite direction to that intended by the driver.
null Possible presence of a plastic part in an inlet valve of the ABS/ESP (anti-lock braking system/electronic stabilisation program) unit may cause faulty regulation by the ABS/ESP and untimely wheel-locking.
A12/1361/16 ↗null The tightening torque of the right-hand, lower seatbelt fixing bolts may not be correct. In this case, the performance of the seatbelt may not be guaranteed in the event of an impact.
A12/0600/16 ↗null Oil may leak from the turbocharger on to hot engine parts which could lead to a fire breaking out, even after the engine has been switched off.
A12/0437/16 ↗null The roll-over valve located inside the petrol tank may not work properly. In case of the vehicle turning over, a fuel leak could occur which may lead to a fire.
A12/0241/16 ↗null On some vehicles, the handbrake adjustment made at the factory requires the driver to pull the handbrake fully up to ensure sufficient efficiency of the braking if the vehicle is parked on a slope. If the handbrake…
A12/0055/15 ↗Volltext
null On some vehicles, the handbrake adjustment made at the factory requires the driver to pull the handbrake fully up to ensure sufficient efficiency of the braking if the vehicle is parked on a slope. If the handbrake is not fully deployed when the vehicle is parked on a slope, the vehicle could move leading to an accident.
null The possible non-conformity of the front suspension mounting bolts could lead to bolt breakage which could lead to difficulties in controlling the vehicle path.
A12/1053/14 ↗