AutoDefects
Polski

Małe SUV-y

Suzuki Jimny — niezawodność

W 24 038 brytyjskich badaniach MOT 24,5% egzemplarzy Suzuki Jimny nie przeszło z powodu usterki mechanicznej lub nadwozia. Mediana dla małego SUV-a w tym samym wieku i z tym samym przebiegiem: 24,1%.

71na 100ŚredniaNa poziomie klasy
Najlepsze roczniki
2019, 2020, 2021
Roczniki z największą liczbą usterek
2016, 2017, 2018
Słaby punkt przy dużym przebiegu
Nadwozie, podwozie i korozja, Hamulce, Silnik, wydech i emisja
Oficjalne akcje przywoławcze
6 akcji, poważnych: 1
Usterki mechaniczne
24,5%
Mediana klasy, ten sam wiek i przebieg
24,1%
badań MOT
24 038
Skargi właścicieli w USA
0

Wyniki badań według roku

Wszystkie egzemplarze modelu na badaniach w danym roku wobec klasy w tym samym wieku i z tym samym przebiegiem. Widać, czy model utrzymuje pozycję z wiekiem.

Rok badaniaBadaniaUsterki mechaniczneMediana klasyWszystkie usterki
202424 03824,5%24,1%30,8%
202324 89623,7%23,7%30,2%

Odsetek usterek według roku pierwszej rejestracji

Odsetek usterek mechanicznych na badaniu MOT w 2024 r. według roku pierwszej rejestracji, wobec mediany klasy w tym samym wieku i z tym samym przebiegiem.

Ten modelMediana klasy
0%13%26%2004: 33,5%2004 Mediana klasy: 32,1%042005: 34,1%2005 Mediana klasy: 30,6%052006: 34,4%2006 Mediana klasy: 35,5%062007: 31,6%2007 Mediana klasy: 33,2%072008: 27,2%2008 Mediana klasy: 29,5%082009: 22,7%2009 Mediana klasy: 28,9%092010: 27,0%2010 Mediana klasy: 27,7%102011: 25,2%2011 Mediana klasy: 25,5%112012: 20,7%2012 Mediana klasy: 22,2%122013: 18,1%2013 Mediana klasy: 21,7%132014: 16,2%2014 Mediana klasy: 16,0%142015: 19,7%2015 Mediana klasy: 13,0%152016: 14,7%2016 Mediana klasy: 9,5%162017: 14,0%2017 Mediana klasy: 7,4%172018: 12,7%2018 Mediana klasy: 4,7%182019: 2,3%2019 Mediana klasy: 4,1%192020: 2,0%2020 Mediana klasy: 2,7%202021: 1,0%2021 Mediana klasy: 2,0%21
RokBadaniaUsterki mechaniczneMediana klasyWszystkie usterkiAkcje
20213991,0%2,0%6,0%0
20208842,0%2,7%8,4%1
201911922,3%4,1%7,1%1
201849612,7%4,7%19,8%2
201795814,0%7,4%18,7%0
2016104014,7%9,5%19,6%0
201597719,7%13,0%25,8%0
201485916,2%16,0%22,0%2
201391018,1%21,7%23,6%2
201291420,7%22,2%27,2%1
201177725,2%25,5%32,1%0
201067527,0%27,7%32,0%0
200983922,7%28,9%29,1%0
2008116927,2%29,5%33,8%0
2007164931,6%33,2%37,4%0
2006156234,4%35,5%41,5%0
2005172234,1%30,6%40,4%0
2004204133,5%32,1%40,6%0
Starsze roczniki (6)
RokBadaniaUsterki mechaniczneMediana klasyWszystkie usterkiAkcje
2003171631,9%32,3%38,9%0
2002133632,1%32,6%39,4%0
200186631,5%31,2%38,7%0
200066232,3%33,2%40,3%0
199930936,3%36,3%42,1%0
19986633,3%37,1%37,9%0

Co się psuje w zależności od przebiegu

Odsetek badań niezaliczonych z powodu danego układu. Elementy eksploatacyjne (żarówki, opony, wycieraczki, tablice) nie wpływają na wskaźnik niezawodności.

Układ0-50k km50-100k km100-150k km150k+ km
Usterki mechaniczne7,7% (5,2)20,0% (19,6)31,4% (30,7)35,8% (36,8)
Badania4763669870135564
Zawieszenie i koła4,9% (0,5)9,3% (1,8)12,6% (5,0)15,1% (12,4)
Hamulce2,3% (1,5)8,2% (4,5)14,2% (6,2)16,2% (9,0)
Silnik, wydech i emisja0,5% (0,4)3,5% (0,7)8,4% (2,1)11,7% (4,5)
Układ kierowniczy0,1% (0,1)0,9% (0,3)1,9% (0,8)2,3% (1,8)
Nadwozie, podwozie i korozja0,7% (0,1)5,1% (0,4)12,6% (1,7)15,9% (4,3)
Pasy i poduszki powietrzne0,2% (0,2)1,7% (0,3)4,2% (0,6)5,7% (0,9)
Oświetlenie i elektryka (eksploatacja)2,5% (1,9)5,5% (3,7)12,9% (8,8)16,9% (14,8)
Opony (eksploatacja)0,8% (3,1)1,7% (5,0)2,0% (6,7)2,9% (7,7)
Wycieraczki i szyba (eksploatacja)3,0% (2,6)4,9% (3,2)5,7% (3,9)6,7% (5,2)
Inne i tablice (eksploatacja)0,2% (0,1)0,3% (0,1)0,7% (0,2)0,8% (0,4)

(…) = Mediana klasy, ten sam wiek i przebieg

Lista kontrolna dla mechanika przed zakupem

Na podstawie układów, w których ten model psuje się częściej niż jego klasa przy przebiegu od 100 000 km, oraz otwartych akcji przywoławczych.

  1. Nadwozie i podwozie: obejrzyj progi, ramy pomocnicze, punkty podnoszenia i podłogę pod kątem korozji i śladów napraw.
  2. Hamulce: zmierz tarcze i klocki, sprawdź przewody hamulcowe pod kątem korozji, hamulec ręczny i kontrolkę ABS.
  3. Silnik i wydech: szukaj wycieków oleju i płynu chłodniczego, nieszczelności i korozji wydechu, kontrolek; w dieslu stan DPF/EGR i dymienie.
  4. Akcje przywoławcze: poważnych akcji dla modelu — 1. Poproś o potwierdzenie wykonania napraw
    • A12/00955/21 · 2020 · Due to improper design, the lead wires in the driver and passenger side door harness could be damaged or cut by the repeated motion of…

    Sprawdź konkretne auto po VIN na oficjalnych stronach: NHTSA (US) · DVSA (UK)

Oficjalne akcje przywoławcze

Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.

  • EU Safety Gate2018, 2019

    The resinous material of the fuel pump is not dense enough, can deform and come into contact with the pump housing. This can cause the pump to fail, potentially resulting in the engine stalling and increasing the risk…

    Pełny tekst

    The resinous material of the fuel pump is not dense enough, can deform and come into contact with the pump housing. This can cause the pump to fail, potentially resulting in the engine stalling and increasing the risk of accidents and injuries.

    A12/00885/24 ↗
  • EU Safety GatePoważne2020

    Due to improper design, the lead wires in the driver and passenger side door harness could be damaged or cut by the repeated motion of opening and closing the doors. This may cause the curtain and side airbags to not…

    Pełny tekst

    Due to improper design, the lead wires in the driver and passenger side door harness could be damaged or cut by the repeated motion of opening and closing the doors. This may cause the curtain and side airbags to not deploy correctly in the event of an accident, increasing the risk of injury.

    A12/00955/21 ↗
  • EU Safety Gate2018

    The fuel feeding impeller in the fuel pump, which is made of resin material, may be swollen and deformed due to the insufficient material density caused by the improper injection molding process. Consequently, the…

    Pełny tekst

    The fuel feeding impeller in the fuel pump, which is made of resin material, may be swollen and deformed due to the insufficient material density caused by the improper injection molding process. Consequently, the impeller may interfere with the fuel pump housing, resulting in the fuel pump malfunction. As a result, the engine could stop while driving, increasing the risk of an accident.

    A12/00956/21 ↗
  • EU Safety Gate2013, 2014

    null The brake booster does not work adequately and thus the brake pedal operation can be harder, consequently the stopping distance can be longer.

    A12/1134/16 ↗
  • EU Safety Gate

    null Resin fragments inside the brake hydraulic control unit might get stuck in the hydraulic control valve which could lead to the anti-lock braking system (ABS) not working properly.

    A12/1047/15 ↗
  • EU Safety Gate2012–2014

    null The fastening bolts of the joint between the lateral rod and the axle housing in the front and rear suspension systems may become loose. In the worst case, the bolts can drop off. If this happens, and if the car is…

    Pełny tekst

    null The fastening bolts of the joint between the lateral rod and the axle housing in the front and rear suspension systems may become loose. In the worst case, the bolts can drop off. If this happens, and if the car is used in this condition, the operation of the steering might be affected.

    A12/0834/14 ↗