AutoDefects
Español

SUV pequeños

Fiabilidad del Suzuki Jimny

En 24.038 inspecciones MOT británicas, el 24,5 % de los Suzuki Jimny no pasó por un defecto mecánico o estructural. La mediana de un SUV pequeño con la misma edad y kilometraje: 24,1 %.

71de 100MediaEn línea con su clase
Mejores años
2019, 2020, 2021
Años con más fallos
2016, 2017, 2018
Punto débil con kilometraje alto
Carrocería, bastidor y corrosión, Frenos, Motor, escape y emisiones
Llamadas a revisión oficiales
6 llamadas a revisión, 1 graves
Tasa de fallo mecánico
24,5%
Mediana de la clase, misma edad y kilometraje
24,1%
inspecciones MOT
24.038
Quejas en EE. UU.
0

Resultados MOT por año de inspección

Toda la flota de este modelo en la inspección de cada año, frente a su clase con la misma edad y kilometraje. Muestra si el modelo mantiene su nivel al envejecer.

Año de inspecciónInspeccionesFallo mecánicoMediana de la claseCualquier fallo
202424.03824,5%24,1%30,8%
202324.89623,7%23,7%30,2%

Tasa de fallo por año de primera matriculación

Tasa de fallo mecánico en la MOT de 2024 según el año de primera matriculación, frente a la mediana de su clase con la misma edad y kilometraje.

Este modeloMediana de la clase
0%13%26%2004: 33,5%2004 Mediana de la clase: 32,1%042005: 34,1%2005 Mediana de la clase: 30,6%052006: 34,4%2006 Mediana de la clase: 35,5%062007: 31,6%2007 Mediana de la clase: 33,2%072008: 27,2%2008 Mediana de la clase: 29,5%082009: 22,7%2009 Mediana de la clase: 28,9%092010: 27,0%2010 Mediana de la clase: 27,7%102011: 25,2%2011 Mediana de la clase: 25,5%112012: 20,7%2012 Mediana de la clase: 22,2%122013: 18,1%2013 Mediana de la clase: 21,7%132014: 16,2%2014 Mediana de la clase: 16,0%142015: 19,7%2015 Mediana de la clase: 13,0%152016: 14,7%2016 Mediana de la clase: 9,5%162017: 14,0%2017 Mediana de la clase: 7,4%172018: 12,7%2018 Mediana de la clase: 4,7%182019: 2,3%2019 Mediana de la clase: 4,1%192020: 2,0%2020 Mediana de la clase: 2,7%202021: 1,0%2021 Mediana de la clase: 2,0%21
AñoInspeccionesFallo mecánicoMediana de la claseCualquier falloLlamadas
20213991,0%2,0%6,0%0
20208842,0%2,7%8,4%1
201911922,3%4,1%7,1%1
201849612,7%4,7%19,8%2
201795814,0%7,4%18,7%0
2016104014,7%9,5%19,6%0
201597719,7%13,0%25,8%0
201485916,2%16,0%22,0%2
201391018,1%21,7%23,6%2
201291420,7%22,2%27,2%1
201177725,2%25,5%32,1%0
201067527,0%27,7%32,0%0
200983922,7%28,9%29,1%0
2008116927,2%29,5%33,8%0
2007164931,6%33,2%37,4%0
2006156234,4%35,5%41,5%0
2005172234,1%30,6%40,4%0
2004204133,5%32,1%40,6%0
Años anteriores (6)
AñoInspeccionesFallo mecánicoMediana de la claseCualquier falloLlamadas
2003171631,9%32,3%38,9%0
2002133632,1%32,6%39,4%0
200186631,5%31,2%38,7%0
200066232,3%33,2%40,3%0
199930936,3%36,3%42,1%0
19986633,3%37,1%37,9%0

Qué falla según el kilometraje

Porcentaje de inspecciones suspendidas en cada sistema. Los elementos de desgaste (bombillas, neumáticos, escobillas, matrículas) no cuentan para el índice.

Sistema0-50k km50-100k km100-150k km150k+ km
Fallo mecánico7,7% (5,2)20,0% (19,6)31,4% (30,7)35,8% (36,8)
Inspecciones4763669870135564
Suspensión y ruedas4,9% (0,5)9,3% (1,8)12,6% (5,0)15,1% (12,4)
Frenos2,3% (1,5)8,2% (4,5)14,2% (6,2)16,2% (9,0)
Motor, escape y emisiones0,5% (0,4)3,5% (0,7)8,4% (2,1)11,7% (4,5)
Dirección0,1% (0,1)0,9% (0,3)1,9% (0,8)2,3% (1,8)
Carrocería, bastidor y corrosión0,7% (0,1)5,1% (0,4)12,6% (1,7)15,9% (4,3)
Cinturones y airbags0,2% (0,2)1,7% (0,3)4,2% (0,6)5,7% (0,9)
Luces y electricidad (desgaste)2,5% (1,9)5,5% (3,7)12,9% (8,8)16,9% (14,8)
Neumáticos (desgaste)0,8% (3,1)1,7% (5,0)2,0% (6,7)2,9% (7,7)
Escobillas y parabrisas (desgaste)3,0% (2,6)4,9% (3,2)5,7% (3,9)6,7% (5,2)
Otros y matrículas (desgaste)0,2% (0,1)0,3% (0,1)0,7% (0,2)0,8% (0,4)

(…) = Mediana de la clase, misma edad y kilometraje

Lista de comprobación para el mecánico antes de comprar

Basada en los sistemas en los que este modelo falla más que su clase a partir de 100.000 km y en las llamadas a revisión abiertas.

  1. Carrocería y bastidor: revisar estribos, subchasis, puntos de elevación y suelo (corrosión y reparaciones).
  2. Frenos: medir discos y pastillas, revisar la corrosión de tubos y latiguillos, el freno de mano y el testigo ABS.
  3. Motor y escape: fugas de aceite y refrigerante, fugas y corrosión del escape, testigos; en diésel, estado del FAP/EGR y humos.
  4. Llamadas a revisión: 1 graves afectan a este modelo; pide prueba de que se hicieron
    • A12/00955/21 · 2020 · Due to improper design, the lead wires in the driver and passenger side door harness could be damaged or cut by the repeated motion of…

    Comprueba un coche concreto por su VIN en las webs oficiales: NHTSA (US) · DVSA (UK)

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety Gate2018, 2019

    The resinous material of the fuel pump is not dense enough, can deform and come into contact with the pump housing. This can cause the pump to fail, potentially resulting in the engine stalling and increasing the risk…

    Texto completo

    The resinous material of the fuel pump is not dense enough, can deform and come into contact with the pump housing. This can cause the pump to fail, potentially resulting in the engine stalling and increasing the risk of accidents and injuries.

    A12/00885/24 ↗
  • EU Safety GateGrave2020

    Due to improper design, the lead wires in the driver and passenger side door harness could be damaged or cut by the repeated motion of opening and closing the doors. This may cause the curtain and side airbags to not…

    Texto completo

    Due to improper design, the lead wires in the driver and passenger side door harness could be damaged or cut by the repeated motion of opening and closing the doors. This may cause the curtain and side airbags to not deploy correctly in the event of an accident, increasing the risk of injury.

    A12/00955/21 ↗
  • EU Safety Gate2018

    The fuel feeding impeller in the fuel pump, which is made of resin material, may be swollen and deformed due to the insufficient material density caused by the improper injection molding process. Consequently, the…

    Texto completo

    The fuel feeding impeller in the fuel pump, which is made of resin material, may be swollen and deformed due to the insufficient material density caused by the improper injection molding process. Consequently, the impeller may interfere with the fuel pump housing, resulting in the fuel pump malfunction. As a result, the engine could stop while driving, increasing the risk of an accident.

    A12/00956/21 ↗
  • EU Safety Gate2013, 2014

    null The brake booster does not work adequately and thus the brake pedal operation can be harder, consequently the stopping distance can be longer.

    A12/1134/16 ↗
  • EU Safety Gate

    null Resin fragments inside the brake hydraulic control unit might get stuck in the hydraulic control valve which could lead to the anti-lock braking system (ABS) not working properly.

    A12/1047/15 ↗
  • EU Safety Gate2012–2014

    null The fastening bolts of the joint between the lateral rod and the axle housing in the front and rear suspension systems may become loose. In the worst case, the bolts can drop off. If this happens, and if the car is…

    Texto completo

    null The fastening bolts of the joint between the lateral rod and the axle housing in the front and rear suspension systems may become loose. In the worst case, the bolts can drop off. If this happens, and if the car is used in this condition, the operation of the steering might be affected.

    A12/0834/14 ↗