AutoDefects
Français

Petits SUV

Fiabilité Suzuki Jimny

Sur 24 038 contrôles MOT britanniques, 24,5 % des Suzuki Jimny ont été recalées pour un défaut mécanique ou de structure. Médiane d’une petit SUV du même âge et kilométrage : 24,1 %.

71sur 100MoyenneDans la moyenne de la catégorie
Meilleures années
2019, 2020, 2021
Années avec le plus de défaillances
2016, 2017, 2018
Point faible à fort kilométrage
Carrosserie, châssis et corrosion, Freins, Moteur, échappement et émissions
Rappels officiels
6 rappels, dont 1 graves
Taux de défaillance mécanique
24,5%
Médiane de la catégorie, même âge et kilométrage
24,1%
contrôles MOT
24 038
Plaintes aux États-Unis
0

Résultats MOT par année de contrôle

L’ensemble des voitures de ce modèle au contrôle de chaque année, face à la catégorie au même âge et kilométrage. Montre si le modèle tient son rang en vieillissant.

Année du contrôleContrôlesDéfaillance mécaniqueMédiane catégorieTout défaut
202424 03824,5%24,1%30,8%
202324 89623,7%23,7%30,2%

Taux de défaillance par année de première immatriculation

Taux de défaillance mécanique au contrôle MOT 2024, par année de première immatriculation, comparé à la médiane de la catégorie au même âge et kilométrage.

Ce modèleMédiane catégorie
0%13%26%2004: 33,5%2004 Médiane catégorie: 32,1%042005: 34,1%2005 Médiane catégorie: 30,6%052006: 34,4%2006 Médiane catégorie: 35,5%062007: 31,6%2007 Médiane catégorie: 33,2%072008: 27,2%2008 Médiane catégorie: 29,5%082009: 22,7%2009 Médiane catégorie: 28,9%092010: 27,0%2010 Médiane catégorie: 27,7%102011: 25,2%2011 Médiane catégorie: 25,5%112012: 20,7%2012 Médiane catégorie: 22,2%122013: 18,1%2013 Médiane catégorie: 21,7%132014: 16,2%2014 Médiane catégorie: 16,0%142015: 19,7%2015 Médiane catégorie: 13,0%152016: 14,7%2016 Médiane catégorie: 9,5%162017: 14,0%2017 Médiane catégorie: 7,4%172018: 12,7%2018 Médiane catégorie: 4,7%182019: 2,3%2019 Médiane catégorie: 4,1%192020: 2,0%2020 Médiane catégorie: 2,7%202021: 1,0%2021 Médiane catégorie: 2,0%21
AnnéeContrôlesDéfaillance mécaniqueMédiane catégorieTout défautRappels
20213991,0%2,0%6,0%0
20208842,0%2,7%8,4%1
20191 1922,3%4,1%7,1%1
201849612,7%4,7%19,8%2
201795814,0%7,4%18,7%0
20161 04014,7%9,5%19,6%0
201597719,7%13,0%25,8%0
201485916,2%16,0%22,0%2
201391018,1%21,7%23,6%2
201291420,7%22,2%27,2%1
201177725,2%25,5%32,1%0
201067527,0%27,7%32,0%0
200983922,7%28,9%29,1%0
20081 16927,2%29,5%33,8%0
20071 64931,6%33,2%37,4%0
20061 56234,4%35,5%41,5%0
20051 72234,1%30,6%40,4%0
20042 04133,5%32,1%40,6%0
Années plus anciennes (6)
AnnéeContrôlesDéfaillance mécaniqueMédiane catégorieTout défautRappels
20031 71631,9%32,3%38,9%0
20021 33632,1%32,6%39,4%0
200186631,5%31,2%38,7%0
200066232,3%33,2%40,3%0
199930936,3%36,3%42,1%0
19986633,3%37,1%37,9%0

Ce qui lâche selon le kilométrage

Part des contrôles échoués sur chaque organe. Les pièces d’usure (ampoules, pneus, essuie-glaces, plaques) n’entrent pas dans l’indice de fiabilité.

Organe0-50k km50-100k km100-150k km150k+ km
Défaillance mécanique7,7% (5,2)20,0% (19,6)31,4% (30,7)35,8% (36,8)
Contrôles4 7636 6987 0135 564
Suspension et roues4,9% (0,5)9,3% (1,8)12,6% (5,0)15,1% (12,4)
Freins2,3% (1,5)8,2% (4,5)14,2% (6,2)16,2% (9,0)
Moteur, échappement et émissions0,5% (0,4)3,5% (0,7)8,4% (2,1)11,7% (4,5)
Direction0,1% (0,1)0,9% (0,3)1,9% (0,8)2,3% (1,8)
Carrosserie, châssis et corrosion0,7% (0,1)5,1% (0,4)12,6% (1,7)15,9% (4,3)
Ceintures et airbags0,2% (0,2)1,7% (0,3)4,2% (0,6)5,7% (0,9)
Éclairage et électricité (usure)2,5% (1,9)5,5% (3,7)12,9% (8,8)16,9% (14,8)
Pneus (usure)0,8% (3,1)1,7% (5,0)2,0% (6,7)2,9% (7,7)
Essuie-glaces et pare-brise (usure)3,0% (2,6)4,9% (3,2)5,7% (3,9)6,7% (5,2)
Divers et plaques (usure)0,2% (0,1)0,3% (0,1)0,7% (0,2)0,8% (0,4)

(…) = Médiane de la catégorie, même âge et kilométrage

Liste de contrôle pour le garagiste avant l’achat

Établie à partir des organes où ce modèle échoue plus que sa catégorie à partir de 100 000 km, et des rappels ouverts.

  1. Carrosserie et châssis : inspecter bas de caisse, berceaux, points de levage et plancher (corrosion, réparations).
  2. Freins : mesurer disques et plaquettes, contrôler la corrosion des conduites et flexibles, le frein à main et le voyant ABS.
  3. Moteur et échappement : fuites d’huile et de liquide de refroidissement, fuites et corrosion de l’échappement, voyants ; en diesel, état du FAP/EGR et fumées.
  4. Rappels : 1 rappel(s) grave(s) concernent ce modèle — demandez la preuve des travaux
    • A12/00955/21 · 2020 · Due to improper design, the lead wires in the driver and passenger side door harness could be damaged or cut by the repeated motion of…

    Vérifiez une voiture précise par son VIN sur les sites officiels : NHTSA (US) · DVSA (UK)

Rappels officiels

Rappels publiés par la NHTSA (États-Unis) et l’EU Safety Gate qui citent ce modèle. Vérifiez par VIN si une voiture précise est concernée.

  • EU Safety Gate2018, 2019

    The resinous material of the fuel pump is not dense enough, can deform and come into contact with the pump housing. This can cause the pump to fail, potentially resulting in the engine stalling and increasing the risk…

    Texte complet

    The resinous material of the fuel pump is not dense enough, can deform and come into contact with the pump housing. This can cause the pump to fail, potentially resulting in the engine stalling and increasing the risk of accidents and injuries.

    A12/00885/24 ↗
  • EU Safety GateGrave2020

    Due to improper design, the lead wires in the driver and passenger side door harness could be damaged or cut by the repeated motion of opening and closing the doors. This may cause the curtain and side airbags to not…

    Texte complet

    Due to improper design, the lead wires in the driver and passenger side door harness could be damaged or cut by the repeated motion of opening and closing the doors. This may cause the curtain and side airbags to not deploy correctly in the event of an accident, increasing the risk of injury.

    A12/00955/21 ↗
  • EU Safety Gate2018

    The fuel feeding impeller in the fuel pump, which is made of resin material, may be swollen and deformed due to the insufficient material density caused by the improper injection molding process. Consequently, the…

    Texte complet

    The fuel feeding impeller in the fuel pump, which is made of resin material, may be swollen and deformed due to the insufficient material density caused by the improper injection molding process. Consequently, the impeller may interfere with the fuel pump housing, resulting in the fuel pump malfunction. As a result, the engine could stop while driving, increasing the risk of an accident.

    A12/00956/21 ↗
  • EU Safety Gate2013, 2014

    null The brake booster does not work adequately and thus the brake pedal operation can be harder, consequently the stopping distance can be longer.

    A12/1134/16 ↗
  • EU Safety Gate

    null Resin fragments inside the brake hydraulic control unit might get stuck in the hydraulic control valve which could lead to the anti-lock braking system (ABS) not working properly.

    A12/1047/15 ↗
  • EU Safety Gate2012–2014

    null The fastening bolts of the joint between the lateral rod and the axle housing in the front and rear suspension systems may become loose. In the worst case, the bolts can drop off. If this happens, and if the car is…

    Texte complet

    null The fastening bolts of the joint between the lateral rod and the axle housing in the front and rear suspension systems may become loose. In the worst case, the bolts can drop off. If this happens, and if the car is used in this condition, the operation of the steering might be affected.

    A12/0834/14 ↗