Fiabilité Citroën C3 Aircross
Sur 29 663 contrôles MOT britanniques, 9,0 % des Citroën C3 Aircross ont été recalées pour un défaut mécanique ou de structure. Médiane d’une petit SUV du même âge et kilométrage : 4,7 %.
- Meilleures années
- —
- Années avec le plus de défaillances
- 2018, 2019, 2021
- Point faible à fort kilométrage
- Carrosserie, châssis et corrosion
- Rappels officiels
- 12 rappels, dont 6 graves
- Taux de défaillance mécanique
- 9,0%
- Médiane de la catégorie, même âge et kilométrage
- 4,7%
- Premier contrôle (3 ans), 2021
- 4,0% (2,2%)
- contrôles MOT
- 29 663
- Plaintes aux États-Unis
- 0
Résultats MOT par année de contrôle
L’ensemble des voitures de ce modèle au contrôle de chaque année, face à la catégorie au même âge et kilométrage. Montre si le modèle tient son rang en vieillissant.
| Année du contrôle | Contrôles | Défaillance mécanique | Médiane catégorie | Tout défaut |
|---|---|---|---|---|
| 2024 | 29 663 | 9,0% | 4,7% | 15,1% |
| 2023 | 25 209 | 7,0% | 3,6% | 13,3% |
Taux de défaillance par année de première immatriculation
Taux de défaillance mécanique au contrôle MOT 2024, par année de première immatriculation, comparé à la médiane de la catégorie au même âge et kilométrage.
Défaillances les plus fréquentes au contrôle
Les défauts le plus souvent relevés sur ce modèle, dans la formulation d’origine de la DVSA (en anglais), pour 1 000 contrôles.
Ce qui lâche selon le kilométrage
Part des contrôles échoués sur chaque organe. Les pièces d’usure (ampoules, pneus, essuie-glaces, plaques) n’entrent pas dans l’indice de fiabilité.
(…) = Médiane de la catégorie, même âge et kilométrage
Liste de contrôle pour le garagiste avant l’achat
Établie à partir des organes où ce modèle échoue plus que sa catégorie à partir de 100 000 km, et des rappels ouverts.
- Carrosserie et châssis : inspecter bas de caisse, berceaux, points de levage et plancher (corrosion, réparations).
- Rappels : 5 rappel(s) grave(s) concernent ce modèle — demandez la preuve des travaux
- SR/01382/26 · 2026 · Due to a defect in the engine control unit (inverter) in vehicles equipped with electrified dual-clutch transmission (e-DCT), metal…
- SR/00905/26 · 2025 · The electric power steering harness being routed between two screws, and slight vibrations may cause damage during steering operations.…
- SR/00841/26 · 2023–2026 · There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V…
- SR/02935/25 · 2022–2025 · The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may…
- A12/00034/20 · 2019 · The steering column is not manufactured according to specifications.This may result in steering failure and loss of control over the…
Vérifiez une voiture précise par son VIN sur les sites officiels : NHTSA (US) · DVSA (UK)
Rappels officiels
Rappels publiés par la NHTSA (États-Unis) et l’EU Safety Gate qui citent ce modèle. Vérifiez par VIN si une voiture précise est concernée.
Due to a defect in the engine control unit (inverter) in vehicles equipped with electrified dual-clutch transmission (e-DCT), metal soldering residues may pass into the unit. This can cause internal electric short…
SR/01382/26 ↗Texte complet
Due to a defect in the engine control unit (inverter) in vehicles equipped with electrified dual-clutch transmission (e-DCT), metal soldering residues may pass into the unit. This can cause internal electric short circuits which, can lead to continuous power supply and overheating due to a blocked relay, and cause a fire.
The electric power steering harness being routed between two screws, and slight vibrations may cause damage during steering operations. This may cause a short circuit, leading to a loss of power steering assistance…
SR/00905/26 ↗Texte complet
The electric power steering harness being routed between two screws, and slight vibrations may cause damage during steering operations. This may cause a short circuit, leading to a loss of power steering assistance and/or a fire in the passenger compartment.
There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and…
SR/00841/26 ↗Texte complet
There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and contact between these components can lead to water infiltration, causing an electric arc which may trigger a thermal event, such as overheating. There is a risk of fire.
The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.
SR/02935/25 ↗The brake pedal support may not be attached securely enough due to a missing or poorly assembled pin. If the pin falls, the brake pedal could disengage, making it impossible to stop the vehicle. This may lead to…
SR/04252/25 ↗Texte complet
The brake pedal support may not be attached securely enough due to a missing or poorly assembled pin. If the pin falls, the brake pedal could disengage, making it impossible to stop the vehicle. This may lead to injuries. If the brake pedal fails, the electronic parking brake on the centre console may be used while driving to slow the vehicle down to a controlled stop. Furthermore, when active, the automatic emergency braking system intervenes when it detects an imminent collision.
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03151/25 ↗Texte complet
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
Afficher 6 rappels de plus
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02655/25 ↗Texte complet
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory…
SR/00435/25 ↗Texte complet
Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
Due to the insufficient hardness of the steel, cracks may appear in the rear axle cross member. This affects the vehicle’s handling, increasing the risk of an accident.
A12/01766/23 ↗The steering column is not manufactured according to specifications.This may result in steering failure and loss of control over the vehicle, increasing the risk of an accident.
A12/00034/20 ↗The rear axle connection may be inadequate and could break. As a result, the rear axle may be disconnected from the vehicle, increasing the risk of an accident.
A12/0976/19 ↗A protruding weld stud may damage the bodywork wire harness and lead to a short-circuit. This may consequently cause a fire.
A12/0584/19 ↗