Fiabilidad del Citroën C3 Aircross
En 29.663 inspecciones MOT británicas, el 9,0 % de los Citroën C3 Aircross no pasó por un defecto mecánico o estructural. La mediana de un SUV pequeño con la misma edad y kilometraje: 4,7 %.
- Mejores años
- —
- Años con más fallos
- 2018, 2019, 2021
- Punto débil con kilometraje alto
- Carrocería, bastidor y corrosión
- Llamadas a revisión oficiales
- 12 llamadas a revisión, 6 graves
- Tasa de fallo mecánico
- 9,0%
- Mediana de la clase, misma edad y kilometraje
- 4,7%
- Primera inspección (3 años), 2021
- 4,0% (2,2%)
- inspecciones MOT
- 29.663
- Quejas en EE. UU.
- 0
Resultados MOT por año de inspección
Toda la flota de este modelo en la inspección de cada año, frente a su clase con la misma edad y kilometraje. Muestra si el modelo mantiene su nivel al envejecer.
| Año de inspección | Inspecciones | Fallo mecánico | Mediana de la clase | Cualquier fallo |
|---|---|---|---|---|
| 2024 | 29.663 | 9,0% | 4,7% | 15,1% |
| 2023 | 25.209 | 7,0% | 3,6% | 13,3% |
Tasa de fallo por año de primera matriculación
Tasa de fallo mecánico en la MOT de 2024 según el año de primera matriculación, frente a la mediana de su clase con la misma edad y kilometraje.
Fallos más frecuentes en la inspección
Los defectos que los inspectores registraron con más frecuencia en este modelo, con la redacción original de la DVSA (en inglés), por cada 1.000 inspecciones.
Qué falla según el kilometraje
Porcentaje de inspecciones suspendidas en cada sistema. Los elementos de desgaste (bombillas, neumáticos, escobillas, matrículas) no cuentan para el índice.
(…) = Mediana de la clase, misma edad y kilometraje
Lista de comprobación para el mecánico antes de comprar
Basada en los sistemas en los que este modelo falla más que su clase a partir de 100.000 km y en las llamadas a revisión abiertas.
- Carrocería y bastidor: revisar estribos, subchasis, puntos de elevación y suelo (corrosión y reparaciones).
- Llamadas a revisión: 5 graves afectan a este modelo; pide prueba de que se hicieron
- SR/01382/26 · 2026 · Due to a defect in the engine control unit (inverter) in vehicles equipped with electrified dual-clutch transmission (e-DCT), metal…
- SR/00905/26 · 2025 · The electric power steering harness being routed between two screws, and slight vibrations may cause damage during steering operations.…
- SR/00841/26 · 2023–2026 · There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V…
- SR/02935/25 · 2022–2025 · The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may…
- A12/00034/20 · 2019 · The steering column is not manufactured according to specifications.This may result in steering failure and loss of control over the…
Comprueba un coche concreto por su VIN en las webs oficiales: NHTSA (US) · DVSA (UK)
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
Due to a defect in the engine control unit (inverter) in vehicles equipped with electrified dual-clutch transmission (e-DCT), metal soldering residues may pass into the unit. This can cause internal electric short…
SR/01382/26 ↗Texto completo
Due to a defect in the engine control unit (inverter) in vehicles equipped with electrified dual-clutch transmission (e-DCT), metal soldering residues may pass into the unit. This can cause internal electric short circuits which, can lead to continuous power supply and overheating due to a blocked relay, and cause a fire.
The electric power steering harness being routed between two screws, and slight vibrations may cause damage during steering operations. This may cause a short circuit, leading to a loss of power steering assistance…
SR/00905/26 ↗Texto completo
The electric power steering harness being routed between two screws, and slight vibrations may cause damage during steering operations. This may cause a short circuit, leading to a loss of power steering assistance and/or a fire in the passenger compartment.
There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and…
SR/00841/26 ↗Texto completo
There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and contact between these components can lead to water infiltration, causing an electric arc which may trigger a thermal event, such as overheating. There is a risk of fire.
The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.
SR/02935/25 ↗The brake pedal support may not be attached securely enough due to a missing or poorly assembled pin. If the pin falls, the brake pedal could disengage, making it impossible to stop the vehicle. This may lead to…
SR/04252/25 ↗Texto completo
The brake pedal support may not be attached securely enough due to a missing or poorly assembled pin. If the pin falls, the brake pedal could disengage, making it impossible to stop the vehicle. This may lead to injuries. If the brake pedal fails, the electronic parking brake on the centre console may be used while driving to slow the vehicle down to a controlled stop. Furthermore, when active, the automatic emergency braking system intervenes when it detects an imminent collision.
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03151/25 ↗Texto completo
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
Mostrar 6 llamadas más
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02655/25 ↗Texto completo
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory…
SR/00435/25 ↗Texto completo
Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
Due to the insufficient hardness of the steel, cracks may appear in the rear axle cross member. This affects the vehicle’s handling, increasing the risk of an accident.
A12/01766/23 ↗The steering column is not manufactured according to specifications.This may result in steering failure and loss of control over the vehicle, increasing the risk of an accident.
A12/00034/20 ↗The rear axle connection may be inadequate and could break. As a result, the rear axle may be disconnected from the vehicle, increasing the risk of an accident.
A12/0976/19 ↗A protruding weld stud may damage the bodywork wire harness and lead to a short-circuit. This may consequently cause a fire.
A12/0584/19 ↗