AutoDefects
Español

Citroën C3 Aircross 2019: fiabilidad

75 % más fallos mecánicos que su clase

9771 inspecciones MOT de Citroën C3 Aircross matriculados por primera vez en 2019: el 8,6 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 4,9 %.

Tasa de fallo mecánico
8,6%
Mediana de la clase, misma edad y kilometraje
4,9%
No pasó la MOT (cualquier motivo)
14,4%
inspecciones MOT
9771
Llamadas a revisión
5

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km47495,6%2,6%
50-100k km464911,4%6,8%
100-150k km35611,0%10,3%
150k+ km1717,7%10,1%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas0,8%
Frenos4,8%
Motor, escape y emisiones0,8%
Dirección0,0%
Carrocería, bastidor y corrosión2,7%
Cinturones y airbags0,4%
Luces y electricidad (desgaste)2,8%
Neumáticos (desgaste)3,9%
Escobillas y parabrisas (desgaste)1,5%
Otros y matrículas (desgaste)0,1%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety Gate2015–2024

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Texto completo

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03151/25 ↗
  • EU Safety Gate2017–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Texto completo

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02655/25 ↗
  • EU Safety GateGrave2019

    The steering column is not manufactured according to specifications.This may result in steering failure and loss of control over the vehicle, increasing the risk of an accident.

    A12/00034/20 ↗
  • EU Safety Gate2019

    The rear axle connection may be inadequate and could break. As a result, the rear axle may be disconnected from the vehicle, increasing the risk of an accident.

    A12/0976/19 ↗
  • EU Safety GateGrave2016–2019

    A protruding weld stud may damage the bodywork wire harness and lead to a short-circuit. This may consequently cause a fire.

    A12/0584/19 ↗