AutoDefects
Deutsch

Citroën C3 Aircross 2019: Zuverlässigkeit

75% mehr technische Mängel als die Klasse

9.771 MOT-Prüfungen von Citroën C3 Aircross mit Erstzulassung 2019: 8,6% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 4,9%.

Technische Mängelquote
8,6%
Klassenmedian, gleiches Alter und gleiche Laufleistung
4,9%
Durchgefallen (jeder Grund)
14,4%
MOT-Prüfungen
9.771
Rückrufe
5

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km4.7495,6%2,6%
50-100k km4.64911,4%6,8%
100-150k km35611,0%10,3%
150k+ km1717,7%10,1%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder0,8%
Bremsen4,8%
Motor, Abgasanlage und Emissionen0,8%
Lenkung0,0%
Karosserie, Rahmen und Rost2,7%
Gurte und Airbags0,4%
Licht und Elektrik (Verschleiß)2,8%
Reifen (Verschleiß)3,9%
Wischer und Scheibe (Verschleiß)1,5%
Sonstiges und Kennzeichen (Verschleiß)0,1%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety Gate2015–2024

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Volltext

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03151/25 ↗
  • EU Safety Gate2017–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Volltext

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02655/25 ↗
  • EU Safety GateErnst2019

    The steering column is not manufactured according to specifications.This may result in steering failure and loss of control over the vehicle, increasing the risk of an accident.

    A12/00034/20 ↗
  • EU Safety Gate2019

    The rear axle connection may be inadequate and could break. As a result, the rear axle may be disconnected from the vehicle, increasing the risk of an accident.

    A12/0976/19 ↗
  • EU Safety GateErnst2016–2019

    A protruding weld stud may damage the bodywork wire harness and lead to a short-circuit. This may consequently cause a fire.

    A12/0584/19 ↗