AutoDefects
English

Citroën C3 Aircross 2019: reliability

75% more mechanical failures than the class

9,771 MOT tests of Citroën C3 Aircross cars first registered in 2019: 8.6% failed for a mechanical defect; the class median at the same age and mileage is 4.9%.

Mechanical failure rate
8.6%
Class median, same age and mileage
4.9%
Failed MOT (any reason)
14.4%
MOT tests
9,771
Recalls
5

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km4,7495.6%2.6%
50-100k km4,64911.4%6.8%
100-150k km35611.0%10.3%
150k+ km1717.7%10.1%

What fails on this year

SystemMechanical fail
Suspension and wheels0.8%
Brakes4.8%
Engine, exhaust and emissions0.8%
Steering0.0%
Body, chassis and corrosion2.7%
Seat belts and airbags0.4%
Lights and electrics (wear)2.8%
Tyres (wear)3.9%
Wipers and windscreen (wear)1.5%
Other and plates (wear)0.1%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety Gate2015–2024

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Full text

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03151/25 ↗
  • EU Safety Gate2017–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Full text

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02655/25 ↗
  • EU Safety GateSerious2019

    The steering column is not manufactured according to specifications.This may result in steering failure and loss of control over the vehicle, increasing the risk of an accident.

    A12/00034/20 ↗
  • EU Safety Gate2019

    The rear axle connection may be inadequate and could break. As a result, the rear axle may be disconnected from the vehicle, increasing the risk of an accident.

    A12/0976/19 ↗
  • EU Safety GateSerious2016–2019

    A protruding weld stud may damage the bodywork wire harness and lead to a short-circuit. This may consequently cause a fire.

    A12/0584/19 ↗