Citroën C3 Aircross — niezawodność
W 29 663 brytyjskich badaniach MOT 9,0% egzemplarzy Citroën C3 Aircross nie przeszło z powodu usterki mechanicznej lub nadwozia. Mediana dla małego SUV-a w tym samym wieku i z tym samym przebiegiem: 4,7%.
- Najlepsze roczniki
- —
- Roczniki z największą liczbą usterek
- 2018, 2019, 2021
- Słaby punkt przy dużym przebiegu
- Nadwozie, podwozie i korozja
- Oficjalne akcje przywoławcze
- 12 akcji, poważnych: 6
- Usterki mechaniczne
- 9,0%
- Mediana klasy, ten sam wiek i przebieg
- 4,7%
- Pierwsze badanie (3 lata), 2021
- 4,0% (2,2%)
- badań MOT
- 29 663
- Skargi właścicieli w USA
- 0
Wyniki badań według roku
Wszystkie egzemplarze modelu na badaniach w danym roku wobec klasy w tym samym wieku i z tym samym przebiegiem. Widać, czy model utrzymuje pozycję z wiekiem.
| Rok badania | Badania | Usterki mechaniczne | Mediana klasy | Wszystkie usterki |
|---|---|---|---|---|
| 2024 | 29 663 | 9,0% | 4,7% | 15,1% |
| 2023 | 25 209 | 7,0% | 3,6% | 13,3% |
Odsetek usterek według roku pierwszej rejestracji
Odsetek usterek mechanicznych na badaniu MOT w 2024 r. według roku pierwszej rejestracji, wobec mediany klasy w tym samym wieku i z tym samym przebiegiem.
Najczęstsze usterki na badaniu
Usterki najczęściej odnotowywane przez diagnostów przy tym modelu, w oryginalnym brzmieniu DVSA (po angielsku), na 1000 badań.
Co się psuje w zależności od przebiegu
Odsetek badań niezaliczonych z powodu danego układu. Elementy eksploatacyjne (żarówki, opony, wycieraczki, tablice) nie wpływają na wskaźnik niezawodności.
(…) = Mediana klasy, ten sam wiek i przebieg
Lista kontrolna dla mechanika przed zakupem
Na podstawie układów, w których ten model psuje się częściej niż jego klasa przy przebiegu od 100 000 km, oraz otwartych akcji przywoławczych.
- Nadwozie i podwozie: obejrzyj progi, ramy pomocnicze, punkty podnoszenia i podłogę pod kątem korozji i śladów napraw.
- Akcje przywoławcze: poważnych akcji dla modelu — 5. Poproś o potwierdzenie wykonania napraw
- SR/01382/26 · 2026 · Due to a defect in the engine control unit (inverter) in vehicles equipped with electrified dual-clutch transmission (e-DCT), metal…
- SR/00905/26 · 2025 · The electric power steering harness being routed between two screws, and slight vibrations may cause damage during steering operations.…
- SR/00841/26 · 2023–2026 · There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V…
- SR/02935/25 · 2022–2025 · The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may…
- A12/00034/20 · 2019 · The steering column is not manufactured according to specifications.This may result in steering failure and loss of control over the…
Sprawdź konkretne auto po VIN na oficjalnych stronach: NHTSA (US) · DVSA (UK)
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
Due to a defect in the engine control unit (inverter) in vehicles equipped with electrified dual-clutch transmission (e-DCT), metal soldering residues may pass into the unit. This can cause internal electric short…
SR/01382/26 ↗Pełny tekst
Due to a defect in the engine control unit (inverter) in vehicles equipped with electrified dual-clutch transmission (e-DCT), metal soldering residues may pass into the unit. This can cause internal electric short circuits which, can lead to continuous power supply and overheating due to a blocked relay, and cause a fire.
The electric power steering harness being routed between two screws, and slight vibrations may cause damage during steering operations. This may cause a short circuit, leading to a loss of power steering assistance…
SR/00905/26 ↗Pełny tekst
The electric power steering harness being routed between two screws, and slight vibrations may cause damage during steering operations. This may cause a short circuit, leading to a loss of power steering assistance and/or a fire in the passenger compartment.
There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and…
SR/00841/26 ↗Pełny tekst
There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and contact between these components can lead to water infiltration, causing an electric arc which may trigger a thermal event, such as overheating. There is a risk of fire.
The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.
SR/02935/25 ↗The brake pedal support may not be attached securely enough due to a missing or poorly assembled pin. If the pin falls, the brake pedal could disengage, making it impossible to stop the vehicle. This may lead to…
SR/04252/25 ↗Pełny tekst
The brake pedal support may not be attached securely enough due to a missing or poorly assembled pin. If the pin falls, the brake pedal could disengage, making it impossible to stop the vehicle. This may lead to injuries. If the brake pedal fails, the electronic parking brake on the centre console may be used while driving to slow the vehicle down to a controlled stop. Furthermore, when active, the automatic emergency braking system intervenes when it detects an imminent collision.
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03151/25 ↗Pełny tekst
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
Pokaż jeszcze 6 akcji
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02655/25 ↗Pełny tekst
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory…
SR/00435/25 ↗Pełny tekst
Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
Due to the insufficient hardness of the steel, cracks may appear in the rear axle cross member. This affects the vehicle’s handling, increasing the risk of an accident.
A12/01766/23 ↗The steering column is not manufactured according to specifications.This may result in steering failure and loss of control over the vehicle, increasing the risk of an accident.
A12/00034/20 ↗The rear axle connection may be inadequate and could break. As a result, the rear axle may be disconnected from the vehicle, increasing the risk of an accident.
A12/0976/19 ↗A protruding weld stud may damage the bodywork wire harness and lead to a short-circuit. This may consequently cause a fire.
A12/0584/19 ↗