AutoDefects
Français

Suzuki Jimny 2018 : fiabilité

169 % de défaillances mécaniques en plus que la catégorie

496 contrôles MOT de Suzuki Jimny immatriculées pour la première fois en 2018 : 12,7 % recalées pour un défaut mécanique ; la médiane de la catégorie au même âge et kilométrage est de 4,7 %.

Taux de défaillance mécanique
12,7%
Médiane de la catégorie, même âge et kilométrage
4,7%
Recalés (toute raison)
19,8%
contrôles MOT
496
Rappels
2

Ce qui lâche selon le kilométrage

KilométrageContrôlesDéfaillance mécaniqueMédiane catégorie
0-50k km3159,5%2,9%
50-100k km15617,3%6,9%
100-150k km2123,8%13,2%
150k+ km425,0%17,8%

Ce qui lâche sur cette année

OrganeDéfaillance mécanique
Suspension et roues11,5%
Freins1,4%
Moteur, échappement et émissions0,2%
Direction0,0%
Carrosserie, châssis et corrosion0,2%
Ceintures et airbags0,0%
Éclairage et électricité (usure)4,2%
Pneus (usure)2,2%
Essuie-glaces et pare-brise (usure)3,6%
Divers et plaques (usure)0,2%

Rappels officiels

Rappels publiés par la NHTSA (États-Unis) et l’EU Safety Gate qui citent ce modèle. Vérifiez par VIN si une voiture précise est concernée.

  • EU Safety Gate2018, 2019

    The resinous material of the fuel pump is not dense enough, can deform and come into contact with the pump housing. This can cause the pump to fail, potentially resulting in the engine stalling and increasing the risk…

    Texte complet

    The resinous material of the fuel pump is not dense enough, can deform and come into contact with the pump housing. This can cause the pump to fail, potentially resulting in the engine stalling and increasing the risk of accidents and injuries.

    A12/00885/24 ↗
  • EU Safety Gate2018

    The fuel feeding impeller in the fuel pump, which is made of resin material, may be swollen and deformed due to the insufficient material density caused by the improper injection molding process. Consequently, the…

    Texte complet

    The fuel feeding impeller in the fuel pump, which is made of resin material, may be swollen and deformed due to the insufficient material density caused by the improper injection molding process. Consequently, the impeller may interfere with the fuel pump housing, resulting in the fuel pump malfunction. As a result, the engine could stop while driving, increasing the risk of an accident.

    A12/00956/21 ↗