AutoDefects
Deutsch

Suzuki Jimny 2018: Zuverlässigkeit

169% mehr technische Mängel als die Klasse

496 MOT-Prüfungen von Suzuki Jimny mit Erstzulassung 2018: 12,7% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 4,7%.

Technische Mängelquote
12,7%
Klassenmedian, gleiches Alter und gleiche Laufleistung
4,7%
Durchgefallen (jeder Grund)
19,8%
MOT-Prüfungen
496
Rückrufe
2

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km3159,5%2,9%
50-100k km15617,3%6,9%
100-150k km2123,8%13,2%
150k+ km425,0%17,8%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder11,5%
Bremsen1,4%
Motor, Abgasanlage und Emissionen0,2%
Lenkung0,0%
Karosserie, Rahmen und Rost0,2%
Gurte und Airbags0,0%
Licht und Elektrik (Verschleiß)4,2%
Reifen (Verschleiß)2,2%
Wischer und Scheibe (Verschleiß)3,6%
Sonstiges und Kennzeichen (Verschleiß)0,2%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety Gate2018, 2019

    The resinous material of the fuel pump is not dense enough, can deform and come into contact with the pump housing. This can cause the pump to fail, potentially resulting in the engine stalling and increasing the risk…

    Volltext

    The resinous material of the fuel pump is not dense enough, can deform and come into contact with the pump housing. This can cause the pump to fail, potentially resulting in the engine stalling and increasing the risk of accidents and injuries.

    A12/00885/24 ↗
  • EU Safety Gate2018

    The fuel feeding impeller in the fuel pump, which is made of resin material, may be swollen and deformed due to the insufficient material density caused by the improper injection molding process. Consequently, the…

    Volltext

    The fuel feeding impeller in the fuel pump, which is made of resin material, may be swollen and deformed due to the insufficient material density caused by the improper injection molding process. Consequently, the impeller may interfere with the fuel pump housing, resulting in the fuel pump malfunction. As a result, the engine could stop while driving, increasing the risk of an accident.

    A12/00956/21 ↗