AutoDefects
Español

Suzuki Jimny 2018: fiabilidad

169 % más fallos mecánicos que su clase

496 inspecciones MOT de Suzuki Jimny matriculados por primera vez en 2018: el 12,7 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 4,7 %.

Tasa de fallo mecánico
12,7%
Mediana de la clase, misma edad y kilometraje
4,7%
No pasó la MOT (cualquier motivo)
19,8%
inspecciones MOT
496
Llamadas a revisión
2

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km3159,5%2,9%
50-100k km15617,3%6,9%
100-150k km2123,8%13,2%
150k+ km425,0%17,8%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas11,5%
Frenos1,4%
Motor, escape y emisiones0,2%
Dirección0,0%
Carrocería, bastidor y corrosión0,2%
Cinturones y airbags0,0%
Luces y electricidad (desgaste)4,2%
Neumáticos (desgaste)2,2%
Escobillas y parabrisas (desgaste)3,6%
Otros y matrículas (desgaste)0,2%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety Gate2018, 2019

    The resinous material of the fuel pump is not dense enough, can deform and come into contact with the pump housing. This can cause the pump to fail, potentially resulting in the engine stalling and increasing the risk…

    Texto completo

    The resinous material of the fuel pump is not dense enough, can deform and come into contact with the pump housing. This can cause the pump to fail, potentially resulting in the engine stalling and increasing the risk of accidents and injuries.

    A12/00885/24 ↗
  • EU Safety Gate2018

    The fuel feeding impeller in the fuel pump, which is made of resin material, may be swollen and deformed due to the insufficient material density caused by the improper injection molding process. Consequently, the…

    Texto completo

    The fuel feeding impeller in the fuel pump, which is made of resin material, may be swollen and deformed due to the insufficient material density caused by the improper injection molding process. Consequently, the impeller may interfere with the fuel pump housing, resulting in the fuel pump malfunction. As a result, the engine could stop while driving, increasing the risk of an accident.

    A12/00956/21 ↗