Kleine SUVs
Suzuki SX4 / S-Cross: Zuverlässigkeit
Bei 41.661 britischen MOT-Prüfungen fielen 19,0% der Suzuki SX4 / S-Cross wegen eines technischen oder Karosseriemangels durch. Median eines kleinen SUVs gleichen Alters und gleicher Laufleistung: 20,4%.
- Beste Baujahre
- 2015, 2020, 2021
- Baujahre mit den meisten Mängeln
- 2010, 2011, 2012
- Schwachstelle bei hoher Laufleistung
- Fahrwerk und Räder, Bremsen, Motor, Abgasanlage und Emissionen
- Amtliche Rückrufe
- 7 Rückrufe, davon 1 ernst
- Technische Mängelquote
- 19,0%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 20,4%
- MOT-Prüfungen
- 41.661
- Beschwerden von US-Haltern
- 0
MOT-Ergebnisse nach Prüfjahr
Alle Fahrzeuge dieses Modells bei der Prüfung des jeweiligen Jahres im Vergleich mit der Klasse bei gleichem Alter und gleicher Laufleistung. Zeigt, ob das Modell mit dem Alter mithält.
| Prüfjahr | Prüfungen | Technische Mängel | Klassenmedian | Alle Mängel |
|---|---|---|---|---|
| 2024 | 41.661 | 19,0% | 20,4% | 28,8% |
| 2023 | 41.371 | 19,7% | 19,6% | 29,1% |
Mängelquote nach Jahr der Erstzulassung
Technische Mängelquote bei der MOT-Prüfung 2024 nach Jahr der Erstzulassung, verglichen mit dem Klassenmedian bei gleichem Alter und gleicher Laufleistung.
| Jahr | Prüfungen | Technische Mängel | Klassenmedian | Alle Mängel | Rückrufe |
|---|---|---|---|---|---|
| 2022 | 65 | 1,5% | 2,1% | 1,5% | 2 |
| 2021 | 1.762 | 1,4% | 2,5% | 9,4% | 2 |
| 2020 | 906 | 1,1% | 3,1% | 8,1% | 2 |
| 2019 | 2.028 | 3,5% | 4,6% | 11,2% | 2 |
| 2018 | 2.724 | 4,3% | 6,3% | 13,9% | 1 |
| 2017 | 3.265 | 7,1% | 10,3% | 16,3% | 1 |
| 2016 | 3.399 | 8,1% | 13,2% | 18,8% | 3 |
| 2015 | 3.769 | 9,8% | 17,8% | 21,2% | 4 |
| 2014 | 6.453 | 15,8% | 21,6% | 26,1% | 1 |
| 2013 | 3.337 | 25,4% | 26,1% | 35,2% | 1 |
| 2012 | 1.972 | 32,4% | 25,3% | 41,8% | 0 |
| 2011 | 2.267 | 33,9% | 30,3% | 43,1% | 0 |
| 2010 | 2.063 | 35,2% | 31,1% | 44,9% | 0 |
| 2009 | 1.948 | 35,1% | 32,9% | 46,2% | 0 |
| 2008 | 2.464 | 34,8% | 32,3% | 45,0% | 0 |
| 2007 | 2.323 | 38,9% | 36,6% | 49,3% | 0 |
| 2006 | 905 | 39,7% | 37,7% | 49,4% | 0 |
Was nach Laufleistung ausfällt
Anteil der Prüfungen, die an der jeweiligen Baugruppe scheiterten. Verschleißteile (Lampen, Reifen, Wischer, Kennzeichen) zählen nicht zum Zuverlässigkeitswert.
(…) = Klassenmedian, gleiches Alter und gleiche Laufleistung
Checkliste für die Werkstatt vor dem Kauf
Abgeleitet aus den Baugruppen, bei denen dieses Modell ab 100.000 km häufiger durchfällt als seine Klasse, und aus offenen Rückrufen.
- Fahrwerk und Räder: Querlenker, Buchsen, Traggelenke, Federn und Stoßdämpfer auf Spiel, Risse und Undichtigkeiten prüfen; auf ungleichmäßigen Reifenverschleiß achten.
- Bremsen: Scheiben und Beläge messen, Bremsleitungen und -schläuche auf Rost prüfen, Handbremse und ABS-Leuchte testen.
- Motor und Abgas: auf Öl- und Kühlmittelverlust, undichte oder rostige Abgasanlage und Warnleuchten achten; beim Diesel DPF/AGR und Rauch prüfen.
- Rückrufe: 1 ernste Rückrufe betreffen dieses Modell – lassen Sie sich die Erledigung nachweisen
- A12/0724/16 · 2013–2016 · null The seams of the front, seat-back covers may have been sewn incorrectly in the area of the side airbag. As a consequence, the seams…
Ein bestimmtes Auto per FIN auf den offiziellen Seiten prüfen: NHTSA (US) · DVSA (UK)
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
Due to a defective Evaporative Emission Control System (EVAP) cannister, fuel vapor can escape from the vehicle and contaminate the environment.
A12/02341/24 ↗The left rear brake pipe may have been damaged during tightening process, which may lead to rust development and to the creation of a hole. This may cause brake fluid leaks, resulting in impaired braking performance and…
A12/00405/24 ↗Volltext
The left rear brake pipe may have been damaged during tightening process, which may lead to rust development and to the creation of a hole. This may cause brake fluid leaks, resulting in impaired braking performance and loss of driving stability, increasing the risk of an accident.
Due to the swelling of the valve in the vacuum pump, the negative pressure of the brake boosters can be temporarily blocked. Consequently, even if the braking system remains functional, the brake pedal must be pressed…
A12/01781/22 ↗Volltext
Due to the swelling of the valve in the vacuum pump, the negative pressure of the brake boosters can be temporarily blocked. Consequently, even if the braking system remains functional, the brake pedal must be pressed hard, increasing the risk of an accident.
Irregularities were found in the emission behaviour of vehicles from Suzuki. Producing disproportionate NOX emissions will harm the environment and health of human beings. The product doesn't comply with the…
A12/01508/21 ↗Volltext
Irregularities were found in the emission behaviour of vehicles from Suzuki. Producing disproportionate NOX emissions will harm the environment and health of human beings. The product doesn't comply with the requirements laid down in the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
null The ambient temperature sensor may malfunction. If this occurs, the engine controller will not detect sensor failure and consequently the MIL (Malfunction Indicator Light) will not illuminate. These systems monitor…
A12/0218/17 ↗Volltext
null The ambient temperature sensor may malfunction. If this occurs, the engine controller will not detect sensor failure and consequently the MIL (Malfunction Indicator Light) will not illuminate. These systems monitor the vehicle’s exhaust and pollution control devices to ensure that they are operating properly.
null The seams of the front, seat-back covers may have been sewn incorrectly in the area of the side airbag. As a consequence, the seams are too close together and sewn too tightly so that, in the event of an accident,…
A12/0724/16 ↗Volltext
null The seams of the front, seat-back covers may have been sewn incorrectly in the area of the side airbag. As a consequence, the seams are too close together and sewn too tightly so that, in the event of an accident, it is possible that the side airbag will not be deployed correctly.
1 weitere Rückrufe anzeigen
null The abrasion coefficient modification coating may not been have been applied on the rear axle bolts during the manufacturing of the bolts. The bolts might consequently loosen, come off or break. If this happens,…
A12/0399/16 ↗Volltext
null The abrasion coefficient modification coating may not been have been applied on the rear axle bolts during the manufacturing of the bolts. The bolts might consequently loosen, come off or break. If this happens, the vehicle could become impossible to drive.