Suzuki SX4 / S-Cross 2015: Zuverlässigkeit
3.769 MOT-Prüfungen von Suzuki SX4 / S-Cross mit Erstzulassung 2015: 9,8% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 17,8%.
- Technische Mängelquote
- 9,8%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 17,8%
- Durchgefallen (jeder Grund)
- 21,2%
- MOT-Prüfungen
- 3.769
- Rückrufe
- 4
Was nach Laufleistung ausfällt
| Laufleistung | Prüfungen | Technische Mängel | Klassenmedian |
|---|---|---|---|
| 0-50k km | 277 | 2,2% | 7,2% |
| 50-100k km | 1.546 | 6,4% | 14,5% |
| 100-150k km | 1.417 | 11,8% | 20,7% |
| 150k+ km | 529 | 18,3% | 25,6% |
Was bei diesem Baujahr ausfällt
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
Due to the swelling of the valve in the vacuum pump, the negative pressure of the brake boosters can be temporarily blocked. Consequently, even if the braking system remains functional, the brake pedal must be pressed…
A12/01781/22 ↗Volltext
Due to the swelling of the valve in the vacuum pump, the negative pressure of the brake boosters can be temporarily blocked. Consequently, even if the braking system remains functional, the brake pedal must be pressed hard, increasing the risk of an accident.
null The ambient temperature sensor may malfunction. If this occurs, the engine controller will not detect sensor failure and consequently the MIL (Malfunction Indicator Light) will not illuminate. These systems monitor…
A12/0218/17 ↗Volltext
null The ambient temperature sensor may malfunction. If this occurs, the engine controller will not detect sensor failure and consequently the MIL (Malfunction Indicator Light) will not illuminate. These systems monitor the vehicle’s exhaust and pollution control devices to ensure that they are operating properly.
null The seams of the front, seat-back covers may have been sewn incorrectly in the area of the side airbag. As a consequence, the seams are too close together and sewn too tightly so that, in the event of an accident,…
A12/0724/16 ↗Volltext
null The seams of the front, seat-back covers may have been sewn incorrectly in the area of the side airbag. As a consequence, the seams are too close together and sewn too tightly so that, in the event of an accident, it is possible that the side airbag will not be deployed correctly.
null The abrasion coefficient modification coating may not been have been applied on the rear axle bolts during the manufacturing of the bolts. The bolts might consequently loosen, come off or break. If this happens,…
A12/0399/16 ↗Volltext
null The abrasion coefficient modification coating may not been have been applied on the rear axle bolts during the manufacturing of the bolts. The bolts might consequently loosen, come off or break. If this happens, the vehicle could become impossible to drive.