AutoDefects
English

Superminis

Citroën / DS DS3 reliability

In 106,768 UK MOT tests, 30.2% of Citroën / DS DS3 cars failed for a mechanical or structural defect. The median supermini of the same age and mileage: 21.9%.

45of 100Below average38% more mechanical failures than the class
Best years
—
Years with most failures
2015, 2020, 2021
Weak spot at high mileage
Body, chassis and corrosion, Steering, Suspension and wheels
Official recalls
39 recalls, 15 serious
Mechanical failure rate
30.2%
Class median, same age and mileage
21.9%
MOT tests
106,768
US owner complaints
0

MOT results by test year

The whole fleet of this model at each year’s MOT, against its class at the same age and mileage. Shows whether the model keeps its standing as it ages.

MOT yearTestsMechanical failClass medianAny fail
2024106,76830.2%21.9%42.6%
2023108,13128.8%20.0%41.8%

Failure rate by year of first registration

Mechanical failure rate at the 2024 MOT, by the year the car was first registered, against the median of its class at the same age and mileage.

This modelClass median
0%14%29%2010: 39.1%2010 Class median: 31.8%102011: 36.2%2011 Class median: 30.0%112012: 37.1%2012 Class median: 29.0%122013: 35.9%2013 Class median: 26.5%132014: 34.6%2014 Class median: 22.9%142015: 31.4%2015 Class median: 18.5%152016: 23.4%2016 Class median: 16.7%162017: 16.1%2017 Class median: 13.5%172018: 11.2%2018 Class median: 10.7%182019: 6.8%2019 Class median: 5.8%192020: 7.5%2020 Class median: 4.4%202021: 5.9%2021 Class median: 2.7%212022: 1.4%2022 Class median: 1.8%22
YearTestsMechanical failClass medianAny failRecalls
2022711.4%1.8%11.3%7
20211,6925.9%2.7%15.4%5
20201,6357.5%4.4%18.5%5
20192,5296.8%5.8%18.2%11
20183,47511.2%10.7%25.2%7
20177,33716.1%13.5%30.4%16
201611,83023.4%16.7%35.4%12
201514,95531.4%18.5%43.0%10
201417,97934.6%22.9%46.3%11
201317,93935.9%26.5%47.9%9
201214,34637.1%29.0%51.0%7
20119,07236.2%30.0%50.0%8
20103,90539.1%31.8%50.3%8

What fails, by mileage

Share of MOT tests that failed on each system. Wear items (bulbs, tyres, wipers, plates) are excluded from the reliability score.

System0-50k km50-100k km100-150k km150k+ km
Mechanical fail9.6% (6.1)24.1% (15.9)35.5% (25.5)40.7% (32.8)
Tests10,56736,38736,89322,921
Suspension and wheels3.3% (2.0)10.3% (7.2)16.5% (14.6)20.6% (18.8)
Brakes2.5% (2.0)5.5% (5.6)8.1% (9.7)10.5% (12.9)
Engine, exhaust and emissions0.7% (0.6)2.8% (1.7)5.5% (3.9)5.8% (7.4)
Steering0.2% (0.2)2.6% (1.4)7.1% (2.9)9.8% (4.6)
Body, chassis and corrosion4.2% (0.4)10.9% (1.7)15.7% (5.1)17.5% (8.0)
Seat belts and airbags0.2% (0.2)0.4% (0.5)0.8% (1.1)1.5% (1.7)
Lights and electrics (wear)4.5% (3.2)12.8% (9.1)21.7% (17.4)28.0% (25.7)
Tyres (wear)3.7% (3.5)7.1% (5.7)9.6% (7.4)10.9% (8.9)
Wipers and windscreen (wear)6.5% (4.0)5.8% (5.3)6.6% (7.0)7.4% (8.1)
Other and plates (wear)0.1% (0.1)0.2% (0.2)0.2% (0.3)0.4% (0.6)

(…) = Class median, same age and mileage

Pre-purchase checklist for the mechanic

Built from the systems where this model fails more often than its class at 100,000 km and above, and from open recalls.

  1. Body and chassis: inspect sills, subframes, jacking points and the floor for corrosion and previous repairs.
  2. Steering: check for play in the rack, track rod ends and column, power-steering leaks and noise on full lock.
  3. Suspension and wheels: check arms, bushes, ball joints, springs and shock absorbers for play, cracks and leaks; look for uneven tyre wear.
  4. Recalls: 5 serious recalls name this model — ask for proof the work was done
    • SR/00843/26 · 2024–2026 · There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V…
    • SR/02930/25 · 2022–2025 · The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may…
    • A12/03128/23 · 2008–2019 · The structure of the inflator in the front driver and passenger airbags can deteriorate. If the airbag deploys, it could result in…
    • EM/00004/24 · 2009–2019 · The propellant in the driver and passenger airbags may deteriorate over time. In the event of an accident in which the airbags deploy, it…
    • EM/00006/24 · 2009–2017 · The propellant in the driver and passenger airbags may deteriorate over time. In the event of an accident in which the airbags deploy, it…

    Check a specific car by its VIN on the official sites: NHTSA (US) · DVSA (UK)

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2024–2026

    There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and…

    Full text

    There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and contact between these components can lead to water infiltration, causing an electric arc which may trigger a thermal event, such as overheating. There is a risk of fire.

    SR/00843/26 ↗
  • EU Safety GateSerious2022–2025

    The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.

    SR/02930/25 ↗
  • EU Safety Gate2017–2022

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Full text

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03152/25 ↗
  • EU Safety Gate2017–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced in vehicles, fitted with the DV5R engine. This may cause the camshaft chain to break, leading to engine failure. This…

    Full text

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced in vehicles, fitted with the DV5R engine. This may cause the camshaft chain to break, leading to engine failure. This can increase the risk of accidents and injuries.

    SR/02583/25 ↗
  • EU Safety Gate2024

    The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the…

    Full text

    The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the deactivation of stability control due to damage to the pressure sensor. The brake fluid could come into contact with the printed circuit board and result in the deactivation of all control functions (including the anti-lock system and electronic brake force distribution).

    SR/02106/25 ↗
  • EU Safety Gate2022

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…

    Full text

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to a propulsion's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.

    SR/01454/25 ↗
Show 33 more recalls
  • EU Safety Gate2024

    Tyres may have been damaged during the final inspection of the brakes. This can reduce the area of the tyre in contact with the road or cause a tyre failure when in use. This can lead to a sudden loss of tyre pressure…

    Full text

    Tyres may have been damaged during the final inspection of the brakes. This can reduce the area of the tyre in contact with the road or cause a tyre failure when in use. This can lead to a sudden loss of tyre pressure and/or a burst tyre, increasing the risk of accidents and injuries.

    SR/00498/25 ↗
  • EU Safety GateSerious2008–2019

    The structure of the inflator in the front driver and passenger airbags can deteriorate. If the airbag deploys, it could result in fragments from the inflator casing injuring the vehicle’s occupants.

    A12/03128/23 ↗
  • EU Safety Gate2017–2019

    The lubrication of the vacuum pump may be insufficient, which can cause it break.This can lead to reduced braking assistance, increasing the risk of an accident.

    A12/01048/24 ↗
  • EU Safety Gate2022

    In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    A12/02826/24 ↗
  • EU Safety Gate2024

    A crack located inside the Electric Power Steering motor of the steering rack can cause plastic parts to detach from the worm wheel. This can lead to a steering blockage, increasing the risk of accidents and injuries.

    A12/02725/24 ↗
  • EU Safety GateSerious2009–2019

    The propellant in the driver and passenger airbags may deteriorate over time. In the event of an accident in which the airbags deploy, it could rupture with too much force, injuring the vehicle's occupants.

    EM/00004/24 ↗
  • EU Safety GateSerious2009–2017

    The propellant in the driver and passenger airbags may deteriorate over time. In the event of an accident in which the airbags deploy, it could rupture with too much force, injuring the vehicle's occupants.

    EM/00006/24 ↗
  • EU Safety GateSerious2009–2017

    The structure of the driver and front passenger airbags can deteriorate. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.

    A12/00884/24 ↗
  • EU Safety Gate2019–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01875/23 ↗
  • EU Safety GateSerious2022, 2023

    Fuel may leak into the engine compartment and onto the road. This can create a risk of fire and pose a risk to the environment.

    A12/01221/23 ↗
  • EU Safety GateSerious2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Full text

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.

    A12/01043/21 ↗
  • EU Safety GateSerious2021

    The springs of the front suspension may have been poorly positioned, causing damage to paintwork, premature wear and corrosion. This may lead to breakage of the front suspension springs and to a loss of steering…

    Full text

    The springs of the front suspension may have been poorly positioned, causing damage to paintwork, premature wear and corrosion. This may lead to breakage of the front suspension springs and to a loss of steering capacity of the vehicle, increasing the risk of an accident.

    A12/00607/22 ↗
  • EU Safety Gate2019, 2020

    The open circuit detecting system on the high voltage circuit may be over-sensitive and could unnecessarily cut off the current. As a result, the vehicle may lose power during driving, increasing the risk of an…

    Full text

    The open circuit detecting system on the high voltage circuit may be over-sensitive and could unnecessarily cut off the current. As a result, the vehicle may lose power during driving, increasing the risk of an accident. Moreover, it could be impossible to restart or move the vehicle for several minutes.

    A12/00490/22 ↗
  • EU Safety GateSerious2020

    Due to an error in the manufacturing process, a short circuit may occur in the battery located under the front bonnet.This could increase the risk of fire while the vehicle is being charged or on is in motion.

    A12/00172/22 ↗
  • EU Safety Gate2018, 2019

    The computer software used only in after-sales operations and for a limited period (October 2020 to January 2021) was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive…

    Full text

    The computer software used only in after-sales operations and for a limited period (October 2020 to January 2021) was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    A12/00104/22 ↗
  • EU Safety GateSerious2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Full text

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01369/21 ↗
  • EU Safety Gate2014–2018

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…

    Full text

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01186/21 ↗
  • EU Safety Gate2021

    The wishbone screw on the cradle may not be properly tightened. This could cause loss of stability, resulting in loss of control over the vehicle. The product does not meet the requirements laid down in the Regulation…

    Full text

    The wishbone screw on the cradle may not be properly tightened. This could cause loss of stability, resulting in loss of control over the vehicle. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01153/21 ↗
  • EU Safety GateSerious2014–2017

    The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an…

    Full text

    The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01042/21 ↗
  • EU Safety Gate2019

    The fuel tank may be defective.As a result, fuel may leak onto the road, posing a risk to the following traffic.

    A12/00588/21 ↗
  • EU Safety Gate2013–2017

    The vacuum pump may be damaged due to material abrasion of the cog belt. As a result, the braking assistance could be reduced or lost, increasing the risk of an accident.

    A12/01504/20 ↗
  • EU Safety GateSerious2009–2017

    The gas generator of the driver and/or front-seat passenger airbag could be defective.This may result in uncontrolled inflation and the release of metal fragments when the airbag is activated, causing injury to the…

    Full text

    The gas generator of the driver and/or front-seat passenger airbag could be defective.This may result in uncontrolled inflation and the release of metal fragments when the airbag is activated, causing injury to the occupants of the vehicle.

    A12/00148/21 ↗
  • EU Safety Gate2019

    The high-pressure pump has not been tightened to the engine with the correct torque. As a result, fuel may leak onto the road, posing a risk to the following traffic.

    A12/01464/20 ↗
  • EU Safety GateSerious2019

    The plastic layers of the fuel tank do not adhere to each other correctly. As a result, fuel may leak onto the road, posing a risk to the following traffic and increasing the risk of fire.

    A12/1633/19 ↗
  • EU Safety Gate2017

    The front wheel axle assembly may be incorrectly tightened. This may lead to a loss of connection between the steering and the front wheel axle, resulting in an accident causing injury to vehicle occupants or other road…

    Full text

    The front wheel axle assembly may be incorrectly tightened. This may lead to a loss of connection between the steering and the front wheel axle, resulting in an accident causing injury to vehicle occupants or other road users..

    A12/0625/18 ↗
  • EU Safety Gate2017

    null The fixing screws of the wheel axles on the rear cross member may not be tightened correctly. As a result, they could loosen leading to a loss of vehicle control while driving.

    A12/1727/17 ↗
  • EU Safety Gate2017

    null A number of points on the front suspension may not be correctly tightened. There is a risk of loosening over time, which could lead to a degradation in the control of the vehicle. An accident could result.

    A12/1671/17 ↗
  • EU Safety Gate2016

    null Possible presence of a plastic part in an inlet valve of the ABS/ESP (anti-lock braking system/electronic stabilisation program) unit may cause faulty regulation by the ABS/ESP and untimely wheel-locking.

    A12/1363/16 ↗
  • EU Safety GateSerious2016

    null Oil may leak from the turbocharger on to hot engine parts which could lead to a fire breaking out, even after the engine has been switched off.

    A12/0436/16 ↗
  • EU Safety Gate2014

    null The tightening torque of the mounting bolts on the front triangular control arm on the sub-frame could be insufficient. Over time, this could result in the bolts loosening. In the worst-case scenario, this could…

    Full text

    null The tightening torque of the mounting bolts on the front triangular control arm on the sub-frame could be insufficient. Over time, this could result in the bolts loosening. In the worst-case scenario, this could lead to a loss in driving stability and affect the steering.

    A12/0653/15 ↗
  • EU Safety Gate2013

    null The front wishbone fixing bolts may be defective and could break resulting in a change in the driving and steering behaviour of the car.

    A12/1363/14 ↗
  • EU Safety Gate2009–2011

    null The battery earth cable at the gearbox could break causing the engine to stop. If this occurs whilst the car is in motion, it could cause an accident.

    A12/1627/12 ↗
  • EU Safety Gate

    null One of the components of the ABS/ESP hydraulic system may not meet the manufacturer’s required specification which could alter the functioning of the anti-lock braking system and the electronic stability control…

    Full text

    null One of the components of the ABS/ESP hydraulic system may not meet the manufacturer’s required specification which could alter the functioning of the anti-lock braking system and the electronic stability control and cause an accident

    A12/1579/12 ↗