Citroën / DS DS3 2021: reliability
1,692 MOT tests of Citroën / DS DS3 cars first registered in 2021: 5.9% failed for a mechanical defect; the class median at the same age and mileage is 2.7%.
- Mechanical failure rate
- 5.9%
- Class median, same age and mileage
- 2.7%
- Failed MOT (any reason)
- 15.4%
- MOT tests
- 1,692
- Recalls
- 5
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 1,373 | 4.9% | 1.9% |
| 50-100k km | 304 | 9.5% | 5.9% |
| 100-150k km | 12 | 25.0% | 8.0% |
| 150k+ km | 3 | 33.3% | 9.6% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03152/25 ↗Full text
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced in vehicles, fitted with the DV5R engine. This may cause the camshaft chain to break, leading to engine failure. This…
SR/02583/25 ↗Full text
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced in vehicles, fitted with the DV5R engine. This may cause the camshaft chain to break, leading to engine failure. This can increase the risk of accidents and injuries.
A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01875/23 ↗The springs of the front suspension may have been poorly positioned, causing damage to paintwork, premature wear and corrosion. This may lead to breakage of the front suspension springs and to a loss of steering…
A12/00607/22 ↗Full text
The springs of the front suspension may have been poorly positioned, causing damage to paintwork, premature wear and corrosion. This may lead to breakage of the front suspension springs and to a loss of steering capacity of the vehicle, increasing the risk of an accident.
The wishbone screw on the cradle may not be properly tightened. This could cause loss of stability, resulting in loss of control over the vehicle. The product does not meet the requirements laid down in the Regulation…
A12/01153/21 ↗Full text
The wishbone screw on the cradle may not be properly tightened. This could cause loss of stability, resulting in loss of control over the vehicle. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.