Citroën / DS DS3 2017: reliability
7,337 MOT tests of Citroën / DS DS3 cars first registered in 2017: 16.1% failed for a mechanical defect; the class median at the same age and mileage is 13.5%.
- Mechanical failure rate
- 16.1%
- Class median, same age and mileage
- 13.5%
- Failed MOT (any reason)
- 30.4%
- MOT tests
- 7,337
- Recalls
- 16
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 1,663 | 9.9% | 6.9% |
| 50-100k km | 4,295 | 16.4% | 13.8% |
| 100-150k km | 1,163 | 21.9% | 19.9% |
| 150k+ km | 216 | 26.9% | 23.1% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03152/25 ↗Full text
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced in vehicles, fitted with the DV5R engine. This may cause the camshaft chain to break, leading to engine failure. This…
SR/02583/25 ↗Full text
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced in vehicles, fitted with the DV5R engine. This may cause the camshaft chain to break, leading to engine failure. This can increase the risk of accidents and injuries.
The structure of the inflator in the front driver and passenger airbags can deteriorate. If the airbag deploys, it could result in fragments from the inflator casing injuring the vehicle’s occupants.
A12/03128/23 ↗The lubrication of the vacuum pump may be insufficient, which can cause it break.This can lead to reduced braking assistance, increasing the risk of an accident.
A12/01048/24 ↗The propellant in the driver and passenger airbags may deteriorate over time. In the event of an accident in which the airbags deploy, it could rupture with too much force, injuring the vehicle's occupants.
EM/00004/24 ↗The propellant in the driver and passenger airbags may deteriorate over time. In the event of an accident in which the airbags deploy, it could rupture with too much force, injuring the vehicle's occupants.
EM/00006/24 ↗
Show 9 more recalls
The structure of the driver and front passenger airbags can deteriorate. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.
A12/00884/24 ↗The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…
A12/01043/21 ↗Full text
The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.
The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…
A12/01369/21 ↗Full text
The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01186/21 ↗Full text
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an…
A12/01042/21 ↗Full text
The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The vacuum pump may be damaged due to material abrasion of the cog belt. As a result, the braking assistance could be reduced or lost, increasing the risk of an accident.
A12/01504/20 ↗The gas generator of the driver and/or front-seat passenger airbag could be defective.This may result in uncontrolled inflation and the release of metal fragments when the airbag is activated, causing injury to the…
A12/00148/21 ↗Full text
The gas generator of the driver and/or front-seat passenger airbag could be defective.This may result in uncontrolled inflation and the release of metal fragments when the airbag is activated, causing injury to the occupants of the vehicle.
The front wheel axle assembly may be incorrectly tightened. This may lead to a loss of connection between the steering and the front wheel axle, resulting in an accident causing injury to vehicle occupants or other road…
A12/0625/18 ↗Full text
The front wheel axle assembly may be incorrectly tightened. This may lead to a loss of connection between the steering and the front wheel axle, resulting in an accident causing injury to vehicle occupants or other road users..
null The fixing screws of the wheel axles on the rear cross member may not be tightened correctly. As a result, they could loosen leading to a loss of vehicle control while driving.
A12/1727/17 ↗