Citroën / DS DS3 2017: fiabilidad
7337 inspecciones MOT de Citroën / DS DS3 matriculados por primera vez en 2017: el 16,1 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 13,5 %.
- Tasa de fallo mecánico
- 16,1%
- Mediana de la clase, misma edad y kilometraje
- 13,5%
- No pasó la MOT (cualquier motivo)
- 30,4%
- inspecciones MOT
- 7337
- Llamadas a revisión
- 16
Qué falla según el kilometraje
| Kilometraje | Inspecciones | Fallo mecánico | Mediana de la clase |
|---|---|---|---|
| 0-50k km | 1663 | 9,9% | 6,9% |
| 50-100k km | 4295 | 16,4% | 13,8% |
| 100-150k km | 1163 | 21,9% | 19,9% |
| 150k+ km | 216 | 26,9% | 23,1% |
Qué falla en este año
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03152/25 ↗Texto completo
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced in vehicles, fitted with the DV5R engine. This may cause the camshaft chain to break, leading to engine failure. This…
SR/02583/25 ↗Texto completo
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced in vehicles, fitted with the DV5R engine. This may cause the camshaft chain to break, leading to engine failure. This can increase the risk of accidents and injuries.
The structure of the inflator in the front driver and passenger airbags can deteriorate. If the airbag deploys, it could result in fragments from the inflator casing injuring the vehicle’s occupants.
A12/03128/23 ↗The lubrication of the vacuum pump may be insufficient, which can cause it break.This can lead to reduced braking assistance, increasing the risk of an accident.
A12/01048/24 ↗The propellant in the driver and passenger airbags may deteriorate over time. In the event of an accident in which the airbags deploy, it could rupture with too much force, injuring the vehicle's occupants.
EM/00004/24 ↗The propellant in the driver and passenger airbags may deteriorate over time. In the event of an accident in which the airbags deploy, it could rupture with too much force, injuring the vehicle's occupants.
EM/00006/24 ↗
Mostrar 9 llamadas más
The structure of the driver and front passenger airbags can deteriorate. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.
A12/00884/24 ↗The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…
A12/01043/21 ↗Texto completo
The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.
The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…
A12/01369/21 ↗Texto completo
The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01186/21 ↗Texto completo
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an…
A12/01042/21 ↗Texto completo
The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The vacuum pump may be damaged due to material abrasion of the cog belt. As a result, the braking assistance could be reduced or lost, increasing the risk of an accident.
A12/01504/20 ↗The gas generator of the driver and/or front-seat passenger airbag could be defective.This may result in uncontrolled inflation and the release of metal fragments when the airbag is activated, causing injury to the…
A12/00148/21 ↗Texto completo
The gas generator of the driver and/or front-seat passenger airbag could be defective.This may result in uncontrolled inflation and the release of metal fragments when the airbag is activated, causing injury to the occupants of the vehicle.
The front wheel axle assembly may be incorrectly tightened. This may lead to a loss of connection between the steering and the front wheel axle, resulting in an accident causing injury to vehicle occupants or other road…
A12/0625/18 ↗Texto completo
The front wheel axle assembly may be incorrectly tightened. This may lead to a loss of connection between the steering and the front wheel axle, resulting in an accident causing injury to vehicle occupants or other road users..
null The fixing screws of the wheel axles on the rear cross member may not be tightened correctly. As a result, they could loosen leading to a loss of vehicle control while driving.
A12/1727/17 ↗