AutoDefects
Español

Citroën / DS DS3 2016: fiabilidad

40 % más fallos mecánicos que su clase

11.830 inspecciones MOT de Citroën / DS DS3 matriculados por primera vez en 2016: el 23,4 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 16,7 %.

Tasa de fallo mecánico
23,4%
Mediana de la clase, misma edad y kilometraje
16,7%
No pasó la MOT (cualquier motivo)
35,4%
inspecciones MOT
11.830
Llamadas a revisión
12

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km144211,5%8,5%
50-100k km632822,0%15,2%
100-150k km330228,8%21,5%
150k+ km75833,1%24,1%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas9,0%
Frenos5,4%
Motor, escape y emisiones2,1%
Dirección3,3%
Carrocería, bastidor y corrosión11,2%
Cinturones y airbags0,4%
Luces y electricidad (desgaste)11,7%
Neumáticos (desgaste)8,0%
Escobillas y parabrisas (desgaste)5,8%
Otros y matrículas (desgaste)0,2%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety GateGrave2008–2019

    The structure of the inflator in the front driver and passenger airbags can deteriorate. If the airbag deploys, it could result in fragments from the inflator casing injuring the vehicle’s occupants.

    A12/03128/23 ↗
  • EU Safety GateGrave2009–2019

    The propellant in the driver and passenger airbags may deteriorate over time. In the event of an accident in which the airbags deploy, it could rupture with too much force, injuring the vehicle's occupants.

    EM/00004/24 ↗
  • EU Safety GateGrave2009–2017

    The propellant in the driver and passenger airbags may deteriorate over time. In the event of an accident in which the airbags deploy, it could rupture with too much force, injuring the vehicle's occupants.

    EM/00006/24 ↗
  • EU Safety GateGrave2009–2017

    The structure of the driver and front passenger airbags can deteriorate. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.

    A12/00884/24 ↗
  • EU Safety GateGrave2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Texto completo

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.

    A12/01043/21 ↗
  • EU Safety GateGrave2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Texto completo

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01369/21 ↗
Mostrar 6 llamadas más
  • EU Safety Gate2014–2018

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…

    Texto completo

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01186/21 ↗
  • EU Safety GateGrave2014–2017

    The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an…

    Texto completo

    The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01042/21 ↗
  • EU Safety Gate2013–2017

    The vacuum pump may be damaged due to material abrasion of the cog belt. As a result, the braking assistance could be reduced or lost, increasing the risk of an accident.

    A12/01504/20 ↗
  • EU Safety GateGrave2009–2017

    The gas generator of the driver and/or front-seat passenger airbag could be defective.This may result in uncontrolled inflation and the release of metal fragments when the airbag is activated, causing injury to the…

    Texto completo

    The gas generator of the driver and/or front-seat passenger airbag could be defective.This may result in uncontrolled inflation and the release of metal fragments when the airbag is activated, causing injury to the occupants of the vehicle.

    A12/00148/21 ↗
  • EU Safety Gate2016

    null Possible presence of a plastic part in an inlet valve of the ABS/ESP (anti-lock braking system/electronic stabilisation program) unit may cause faulty regulation by the ABS/ESP and untimely wheel-locking.

    A12/1363/16 ↗
  • EU Safety GateGrave2016

    null Oil may leak from the turbocharger on to hot engine parts which could lead to a fire breaking out, even after the engine has been switched off.

    A12/0436/16 ↗