AutoDefects
Polski

Citroën / DS DS3 2016: niezawodność

o 40% więcej usterek mechanicznych niż w klasie

11 830 badań MOT egzemplarzy Citroën / DS DS3 zarejestrowanych po raz pierwszy w 2016: 23,4% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 16,7%.

Usterki mechaniczne
23,4%
Mediana klasy, ten sam wiek i przebieg
16,7%
Negatywne badanie (dowolny powód)
35,4%
badań MOT
11 830
Akcje przywoławcze
12

Co się psuje w zależności od przebiegu

PrzebiegBadaniaUsterki mechaniczneMediana klasy
0-50k km144211,5%8,5%
50-100k km632822,0%15,2%
100-150k km330228,8%21,5%
150k+ km75833,1%24,1%

Co się psuje w tym roczniku

UkładUsterki mechaniczne
Zawieszenie i koła9,0%
Hamulce5,4%
Silnik, wydech i emisja2,1%
Układ kierowniczy3,3%
Nadwozie, podwozie i korozja11,2%
Pasy i poduszki powietrzne0,4%
Oświetlenie i elektryka (eksploatacja)11,7%
Opony (eksploatacja)8,0%
Wycieraczki i szyba (eksploatacja)5,8%
Inne i tablice (eksploatacja)0,2%

Oficjalne akcje przywoławcze

Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.

  • EU Safety GatePoważne2008–2019

    The structure of the inflator in the front driver and passenger airbags can deteriorate. If the airbag deploys, it could result in fragments from the inflator casing injuring the vehicle’s occupants.

    A12/03128/23 ↗
  • EU Safety GatePoważne2009–2019

    The propellant in the driver and passenger airbags may deteriorate over time. In the event of an accident in which the airbags deploy, it could rupture with too much force, injuring the vehicle's occupants.

    EM/00004/24 ↗
  • EU Safety GatePoważne2009–2017

    The propellant in the driver and passenger airbags may deteriorate over time. In the event of an accident in which the airbags deploy, it could rupture with too much force, injuring the vehicle's occupants.

    EM/00006/24 ↗
  • EU Safety GatePoważne2009–2017

    The structure of the driver and front passenger airbags can deteriorate. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.

    A12/00884/24 ↗
  • EU Safety GatePoważne2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Pełny tekst

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.

    A12/01043/21 ↗
  • EU Safety GatePoważne2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Pełny tekst

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01369/21 ↗
Pokaż jeszcze 6 akcji
  • EU Safety Gate2014–2018

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…

    Pełny tekst

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01186/21 ↗
  • EU Safety GatePoważne2014–2017

    The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an…

    Pełny tekst

    The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01042/21 ↗
  • EU Safety Gate2013–2017

    The vacuum pump may be damaged due to material abrasion of the cog belt. As a result, the braking assistance could be reduced or lost, increasing the risk of an accident.

    A12/01504/20 ↗
  • EU Safety GatePoważne2009–2017

    The gas generator of the driver and/or front-seat passenger airbag could be defective.This may result in uncontrolled inflation and the release of metal fragments when the airbag is activated, causing injury to the…

    Pełny tekst

    The gas generator of the driver and/or front-seat passenger airbag could be defective.This may result in uncontrolled inflation and the release of metal fragments when the airbag is activated, causing injury to the occupants of the vehicle.

    A12/00148/21 ↗
  • EU Safety Gate2016

    null Possible presence of a plastic part in an inlet valve of the ABS/ESP (anti-lock braking system/electronic stabilisation program) unit may cause faulty regulation by the ABS/ESP and untimely wheel-locking.

    A12/1363/16 ↗
  • EU Safety GatePoważne2016

    null Oil may leak from the turbocharger on to hot engine parts which could lead to a fire breaking out, even after the engine has been switched off.

    A12/0436/16 ↗