Малий клас (B)
Надійність Citroën / DS DS3
За 106 768 британськими техоглядами MOT 30,2% автомобілів Citroën / DS DS3 не пройшли через механічний або кузовний дефект. Медіана для авто малого класу того ж віку й пробігу: 21,9%.
- Найкращі роки
- —
- Роки з найбільшою кількістю відмов
- 2015, 2020, 2021
- Слабке місце на великому пробігу
- Кузов, рама й корозія, Кермове керування, Підвіска й колеса
- Офіційні відкликання
- 39 відкликань, серйозних: 15
- Відмови через механіку
- 30,2%
- Медіана класу, той самий вік і пробіг
- 21,9%
- техоглядів MOT
- 106 768
- Скарги власників у США
- 0
Результати техоглядів за роками
Уся флотилія цієї моделі на техоглядах кожного року порівняно з класом того ж віку й пробігу. Видно, чи тримає модель позицію з віком.
| Рік техогляду | Техогляди | Механічні відмови | Медіана класу | Усі відмови |
|---|---|---|---|---|
| 2024 | 106 768 | 30,2% | 21,9% | 42,6% |
| 2023 | 108 131 | 28,8% | 20,0% | 41,8% |
Відсоток відмов за роком першої реєстрації
Частка механічних відмов на техогляді 2024 року за роком першої реєстрації авто порівняно з медіаною класу того ж віку й пробігу.
| Рік | Техогляди | Механічні відмови | Медіана класу | Усі відмови | Відкликання |
|---|---|---|---|---|---|
| 2022 | 71 | 1,4% | 1,8% | 11,3% | 7 |
| 2021 | 1 692 | 5,9% | 2,7% | 15,4% | 5 |
| 2020 | 1 635 | 7,5% | 4,4% | 18,5% | 5 |
| 2019 | 2 529 | 6,8% | 5,8% | 18,2% | 11 |
| 2018 | 3 475 | 11,2% | 10,7% | 25,2% | 7 |
| 2017 | 7 337 | 16,1% | 13,5% | 30,4% | 16 |
| 2016 | 11 830 | 23,4% | 16,7% | 35,4% | 12 |
| 2015 | 14 955 | 31,4% | 18,5% | 43,0% | 10 |
| 2014 | 17 979 | 34,6% | 22,9% | 46,3% | 11 |
| 2013 | 17 939 | 35,9% | 26,5% | 47,9% | 9 |
| 2012 | 14 346 | 37,1% | 29,0% | 51,0% | 7 |
| 2011 | 9 072 | 36,2% | 30,0% | 50,0% | 8 |
| 2010 | 3 905 | 39,1% | 31,8% | 50,3% | 8 |
Що ламається залежно від пробігу
Частка техоглядів, не пройдених через кожну систему. Витратні елементи (лампи, шини, щітки, номери) не враховуються в індексі надійності.
(…) = Медіана класу, той самий вік і пробіг
Чекліст для СТО перед купівлею
Складено із систем, де ця модель ламається частіше за свій клас при пробігу від 100 000 км, і з відкритих відкликань.
- Кузов і рама: огляньте пороги, підрамники, домкратні точки й днище на корозію та сліди ремонту.
- Кермо: перевірте люфт рейки, кермових тяг і наконечників, підтікання підсилювача й шум у крайніх положеннях.
- Підвіска й колеса: перевірте важелі, сайлентблоки, кульові опори, пружини й амортизатори на люфти, тріщини й підтікання; подивіться на нерівномірний знос шин.
- Відкликання: серйозних відкликань для моделі — 5. Попросіть підтвердження, що роботи виконано
- SR/00843/26 · 2024–2026 · There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V…
- SR/02930/25 · 2022–2025 · The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may…
- A12/03128/23 · 2008–2019 · The structure of the inflator in the front driver and passenger airbags can deteriorate. If the airbag deploys, it could result in…
- EM/00004/24 · 2009–2019 · The propellant in the driver and passenger airbags may deteriorate over time. In the event of an accident in which the airbags deploy, it…
- EM/00006/24 · 2009–2017 · The propellant in the driver and passenger airbags may deteriorate over time. In the event of an accident in which the airbags deploy, it…
Перевірте конкретне авто за VIN на офіційних сайтах: NHTSA (US) · DVSA (UK)
Офіційні відкликання
Відкликання, опубліковані NHTSA (США) та EU Safety Gate, у яких названо цю модель. Чи стосується це конкретного авто, перевіряйте за VIN.
There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and…
SR/00843/26 ↗Повний текст
There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and contact between these components can lead to water infiltration, causing an electric arc which may trigger a thermal event, such as overheating. There is a risk of fire.
The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.
SR/02930/25 ↗The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03152/25 ↗Повний текст
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced in vehicles, fitted with the DV5R engine. This may cause the camshaft chain to break, leading to engine failure. This…
SR/02583/25 ↗Повний текст
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced in vehicles, fitted with the DV5R engine. This may cause the camshaft chain to break, leading to engine failure. This can increase the risk of accidents and injuries.
The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the…
SR/02106/25 ↗Повний текст
The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the deactivation of stability control due to damage to the pressure sensor. The brake fluid could come into contact with the printed circuit board and result in the deactivation of all control functions (including the anti-lock system and electronic brake force distribution).
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…
SR/01454/25 ↗Повний текст
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to a propulsion's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.
Показати ще 33 відкликань
Tyres may have been damaged during the final inspection of the brakes. This can reduce the area of the tyre in contact with the road or cause a tyre failure when in use. This can lead to a sudden loss of tyre pressure…
SR/00498/25 ↗Повний текст
Tyres may have been damaged during the final inspection of the brakes. This can reduce the area of the tyre in contact with the road or cause a tyre failure when in use. This can lead to a sudden loss of tyre pressure and/or a burst tyre, increasing the risk of accidents and injuries.
The structure of the inflator in the front driver and passenger airbags can deteriorate. If the airbag deploys, it could result in fragments from the inflator casing injuring the vehicle’s occupants.
A12/03128/23 ↗The lubrication of the vacuum pump may be insufficient, which can cause it break.This can lead to reduced braking assistance, increasing the risk of an accident.
A12/01048/24 ↗In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
A12/02826/24 ↗A crack located inside the Electric Power Steering motor of the steering rack can cause plastic parts to detach from the worm wheel. This can lead to a steering blockage, increasing the risk of accidents and injuries.
A12/02725/24 ↗The propellant in the driver and passenger airbags may deteriorate over time. In the event of an accident in which the airbags deploy, it could rupture with too much force, injuring the vehicle's occupants.
EM/00004/24 ↗The propellant in the driver and passenger airbags may deteriorate over time. In the event of an accident in which the airbags deploy, it could rupture with too much force, injuring the vehicle's occupants.
EM/00006/24 ↗The structure of the driver and front passenger airbags can deteriorate. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.
A12/00884/24 ↗A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01875/23 ↗Fuel may leak into the engine compartment and onto the road. This can create a risk of fire and pose a risk to the environment.
A12/01221/23 ↗The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…
A12/01043/21 ↗Повний текст
The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.
The springs of the front suspension may have been poorly positioned, causing damage to paintwork, premature wear and corrosion. This may lead to breakage of the front suspension springs and to a loss of steering…
A12/00607/22 ↗Повний текст
The springs of the front suspension may have been poorly positioned, causing damage to paintwork, premature wear and corrosion. This may lead to breakage of the front suspension springs and to a loss of steering capacity of the vehicle, increasing the risk of an accident.
The open circuit detecting system on the high voltage circuit may be over-sensitive and could unnecessarily cut off the current. As a result, the vehicle may lose power during driving, increasing the risk of an…
A12/00490/22 ↗Повний текст
The open circuit detecting system on the high voltage circuit may be over-sensitive and could unnecessarily cut off the current. As a result, the vehicle may lose power during driving, increasing the risk of an accident. Moreover, it could be impossible to restart or move the vehicle for several minutes.
Due to an error in the manufacturing process, a short circuit may occur in the battery located under the front bonnet.This could increase the risk of fire while the vehicle is being charged or on is in motion.
A12/00172/22 ↗The computer software used only in after-sales operations and for a limited period (October 2020 to January 2021) was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive…
A12/00104/22 ↗Повний текст
The computer software used only in after-sales operations and for a limited period (October 2020 to January 2021) was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…
A12/01369/21 ↗Повний текст
The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01186/21 ↗Повний текст
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The wishbone screw on the cradle may not be properly tightened. This could cause loss of stability, resulting in loss of control over the vehicle. The product does not meet the requirements laid down in the Regulation…
A12/01153/21 ↗Повний текст
The wishbone screw on the cradle may not be properly tightened. This could cause loss of stability, resulting in loss of control over the vehicle. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an…
A12/01042/21 ↗Повний текст
The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The fuel tank may be defective.As a result, fuel may leak onto the road, posing a risk to the following traffic.
A12/00588/21 ↗The vacuum pump may be damaged due to material abrasion of the cog belt. As a result, the braking assistance could be reduced or lost, increasing the risk of an accident.
A12/01504/20 ↗The gas generator of the driver and/or front-seat passenger airbag could be defective.This may result in uncontrolled inflation and the release of metal fragments when the airbag is activated, causing injury to the…
A12/00148/21 ↗Повний текст
The gas generator of the driver and/or front-seat passenger airbag could be defective.This may result in uncontrolled inflation and the release of metal fragments when the airbag is activated, causing injury to the occupants of the vehicle.
The high-pressure pump has not been tightened to the engine with the correct torque. As a result, fuel may leak onto the road, posing a risk to the following traffic.
A12/01464/20 ↗The plastic layers of the fuel tank do not adhere to each other correctly. As a result, fuel may leak onto the road, posing a risk to the following traffic and increasing the risk of fire.
A12/1633/19 ↗The front wheel axle assembly may be incorrectly tightened. This may lead to a loss of connection between the steering and the front wheel axle, resulting in an accident causing injury to vehicle occupants or other road…
A12/0625/18 ↗Повний текст
The front wheel axle assembly may be incorrectly tightened. This may lead to a loss of connection between the steering and the front wheel axle, resulting in an accident causing injury to vehicle occupants or other road users..
null The fixing screws of the wheel axles on the rear cross member may not be tightened correctly. As a result, they could loosen leading to a loss of vehicle control while driving.
A12/1727/17 ↗null A number of points on the front suspension may not be correctly tightened. There is a risk of loosening over time, which could lead to a degradation in the control of the vehicle. An accident could result.
A12/1671/17 ↗null Possible presence of a plastic part in an inlet valve of the ABS/ESP (anti-lock braking system/electronic stabilisation program) unit may cause faulty regulation by the ABS/ESP and untimely wheel-locking.
A12/1363/16 ↗null Oil may leak from the turbocharger on to hot engine parts which could lead to a fire breaking out, even after the engine has been switched off.
A12/0436/16 ↗null The tightening torque of the mounting bolts on the front triangular control arm on the sub-frame could be insufficient. Over time, this could result in the bolts loosening. In the worst-case scenario, this could…
A12/0653/15 ↗Повний текст
null The tightening torque of the mounting bolts on the front triangular control arm on the sub-frame could be insufficient. Over time, this could result in the bolts loosening. In the worst-case scenario, this could lead to a loss in driving stability and affect the steering.
null The front wishbone fixing bolts may be defective and could break resulting in a change in the driving and steering behaviour of the car.
A12/1363/14 ↗null The battery earth cable at the gearbox could break causing the engine to stop. If this occurs whilst the car is in motion, it could cause an accident.
A12/1627/12 ↗null One of the components of the ABS/ESP hydraulic system may not meet the manufacturer’s required specification which could alter the functioning of the anti-lock braking system and the electronic stability control…
A12/1579/12 ↗Повний текст
null One of the components of the ABS/ESP hydraulic system may not meet the manufacturer’s required specification which could alter the functioning of the anti-lock braking system and the electronic stability control and cause an accident