Надійність Volkswagen Polo
За 631 767 британськими техоглядами MOT 22,6% автомобілів Volkswagen Polo не пройшли через механічний або кузовний дефект. Медіана для авто малого класу того ж віку й пробігу: 21,4%.
- Найкращі роки
- 2020, 2021, 2022
- Роки з найбільшою кількістю відмов
- 2009, 2018, 2019
- Слабке місце на великому пробігу
- Кузов, рама й корозія, Гальма, Двигун, вихлоп і викиди
- Офіційні відкликання
- 32 відкликань, серйозних: 18
- Відмови через механіку
- 22,6%
- Медіана класу, той самий вік і пробіг
- 21,4%
- Перший техогляд (3 роки), 2021
- 2,4% (2,7%)
- техоглядів MOT
- 631 767
- Скарги власників у США
- 0
Результати техоглядів за роками
Уся флотилія цієї моделі на техоглядах кожного року порівняно з класом того ж віку й пробігу. Видно, чи тримає модель позицію з віком.
| Рік техогляду | Техогляди | Механічні відмови | Медіана класу | Усі відмови |
|---|---|---|---|---|
| 2024 | 631 767 | 22,6% | 21,4% | 33,0% |
| 2023 | 623 709 | 21,7% | 20,9% | 32,8% |
Відсоток відмов за роком першої реєстрації
Частка механічних відмов на техогляді 2024 року за роком першої реєстрації авто порівняно з медіаною класу того ж віку й пробігу.
| Рік | Техогляди | Механічні відмови | Медіана класу | Усі відмови | Відкликання |
|---|---|---|---|---|---|
| 2022 | 670 | 1,5% | 1,8% | 4,9% | 1 |
| 2021 | 30 261 | 2,4% | 2,7% | 11,3% | 1 |
| 2020 | 26 228 | 3,1% | 4,3% | 12,1% | 4 |
| 2019 | 36 638 | 8,2% | 6,0% | 17,0% | 1 |
| 2018 | 43 847 | 17,6% | 10,9% | 24,1% | 4 |
| 2017 | 45 933 | 13,8% | 13,5% | 22,6% | 9 |
| 2016 | 51 693 | 15,9% | 16,3% | 24,4% | 11 |
| 2015 | 51 382 | 18,4% | 17,7% | 27,1% | 7 |
| 2014 | 44 101 | 20,7% | 21,7% | 32,5% | 11 |
| 2013 | 38 762 | 23,2% | 25,0% | 36,4% | 10 |
| 2012 | 37 580 | 25,1% | 27,2% | 38,0% | 8 |
| 2011 | 39 758 | 29,8% | 28,3% | 41,7% | 8 |
| 2010 | 37 730 | 32,1% | 29,7% | 42,9% | 9 |
| 2009 | 23 435 | 34,8% | 30,7% | 45,8% | 12 |
| 2008 | 25 449 | 36,8% | 33,8% | 48,8% | 11 |
| 2007 | 23 296 | 36,6% | 34,0% | 48,6% | 8 |
| 2006 | 20 030 | 38,3% | 35,5% | 51,5% | 5 |
| 2005 | 15 578 | 39,2% | 36,0% | 51,8% | 3 |
| 2004 | 13 109 | 39,8% | 35,9% | 52,6% | 1 |
Старші роки (14)
| Рік | Техогляди | Механічні відмови | Медіана класу | Усі відмови | Відкликання |
|---|---|---|---|---|---|
| 2003 | 10 598 | 39,8% | 36,7% | 52,5% | 0 |
| 2002 | 6 115 | 39,3% | 35,5% | 51,3% | 0 |
| 2001 | 3 829 | 33,5% | 34,7% | 46,0% | 0 |
| 2000 | 2 497 | 32,6% | 37,1% | 44,5% | 0 |
| 1999 | 886 | 29,4% | 34,8% | 38,2% | 0 |
| 1998 | 479 | 32,4% | 34,8% | 43,2% | 0 |
| 1997 | 353 | 31,7% | 34,8% | 40,8% | 0 |
| 1996 | 336 | 30,7% | 35,4% | 40,2% | 0 |
| 1995 | 136 | 30,2% | 31,1% | 37,5% | 0 |
| 1994 | 157 | 25,5% | 27,6% | 34,4% | 0 |
| 1993 | 257 | 37,0% | 34,7% | 44,0% | 0 |
| 1992 | 205 | 25,4% | 26,8% | 30,7% | 0 |
| 1991 | 240 | 28,3% | 24,2% | 33,3% | 0 |
| 1990 | 149 | 28,2% | 26,2% | 34,9% | 0 |
Найчастіші причини відмов на техогляді
Дефекти, які інспектори найчастіше фіксували на цій моделі, дослівно мовою DVSA (англійською), на 1 000 техоглядів.
Що ламається залежно від пробігу
Частка техоглядів, не пройдених через кожну систему. Витратні елементи (лампи, шини, щітки, номери) не враховуються в індексі надійності.
(…) = Медіана класу, той самий вік і пробіг
Чекліст для СТО перед купівлею
Складено із систем, де ця модель ламається частіше за свій клас при пробігу від 100 000 км, і з відкритих відкликань.
- Кузов і рама: огляньте пороги, підрамники, домкратні точки й днище на корозію та сліди ремонту.
- Гальма: заміряйте диски й колодки, перевірте гальмівні трубки та шланги на корозію, ручне гальмо й лампу ABS.
- Двигун і вихлоп: шукайте підтікання оливи й антифризу, прогари й корозію вихлопу, помилки на панелі; для дизеля — стан сажового фільтра (DPF) і EGR, димність.
- Відкликання: серйозних відкликань для моделі — 5. Попросіть підтвердження, що роботи виконано
- SR/03001/26 · 2026 · Passenger-seat belt assemblies may have been fitted without being correctly secured to the anchorage point. This may impair the protective…
- SR/02865/25 · 2022–2025 · If the front passenger airbag is deployed as a result of an accident, the gas generator housing may burst or components of the gas…
- A12/00923/24 · 2007–2014 · The driver airbag's gas generator may be faulty, resulting in uncontrolled inflation and the release of metal fragments. This increases the…
- SR/00793/25 · 2004–2018 · The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it can result in fragments from the inflator injuring…
- A12/02703/24 · 2006–2017 · The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it can result in fragments from the inflator injuring…
Перевірте конкретне авто за VIN на офіційних сайтах: NHTSA (US) · DVSA (UK)
Офіційні відкликання
Відкликання, опубліковані NHTSA (США) та EU Safety Gate, у яких названо цю модель. Чи стосується це конкретного авто, перевіряйте за VIN.
Passenger-seat belt assemblies may have been fitted without being correctly secured to the anchorage point. This may impair the protective effect of the seatbelt in the event of an accident, increasing the risk of…
SR/03001/26 ↗Повний текст
Passenger-seat belt assemblies may have been fitted without being correctly secured to the anchorage point. This may impair the protective effect of the seatbelt in the event of an accident, increasing the risk of injury to the person sitting in the passenger seat.
The rear axle was not screwed to the body with the required torque, which may result in it coming loose or in loss of control and skewing of the rear wheels. This may increase the risk of accidents and injuries.
SR/03282/25 ↗If the front passenger airbag is deployed as a result of an accident, the gas generator housing may burst or components of the gas generator housing may come loose and cause serious or fatal injuries to vehicle…
SR/02865/25 ↗Повний текст
If the front passenger airbag is deployed as a result of an accident, the gas generator housing may burst or components of the gas generator housing may come loose and cause serious or fatal injuries to vehicle occupants.
The driver airbag's gas generator may be faulty, resulting in uncontrolled inflation and the release of metal fragments. This increases the risk of injuries to the occupants.
A12/00923/24 ↗The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it can result in fragments from the inflator injuring the vehicle's occupants.
SR/00793/25 ↗The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it can result in fragments from the inflator injuring the vehicle's occupants.
A12/02703/24 ↗
Показати ще 26 відкликань
Cars initially used for internal purposes of Volkswagen AG might not have been correctly modified before they were sold to the general public. There is a possibility that certain safety systems of these cars are not…
A12/00793/24 ↗Повний текст
Cars initially used for internal purposes of Volkswagen AG might not have been correctly modified before they were sold to the general public. There is a possibility that certain safety systems of these cars are not correctly modified for street use.
The propellant in the front passenger airbag can deteriorate due to high humidity and temperature variations. In the event of an accident in which the airbag deploys, this could result in fragments from the inflator…
A12/03004/23 ↗Повний текст
The propellant in the front passenger airbag can deteriorate due to high humidity and temperature variations. In the event of an accident in which the airbag deploys, this could result in fragments from the inflator casing coming loose and injuring the vehicle’s occupants.
The propellant can deteriorate due to high humidity and temperature variations. In the event of an accident in which the front airbag is deployed, this could result in fragments from the inflator housing coming loose…
A12/01809/23 ↗Повний текст
The propellant can deteriorate due to high humidity and temperature variations. In the event of an accident in which the front airbag is deployed, this could result in fragments from the inflator housing coming loose and injuring the vehicle’s occupants.
The airbag propellant may be faulty. In the event of an accident this can lead to the release of fragments from the inflator housing, increasing the risk of injury to the occupants.
A12/01380/23 ↗The airbag propellant may deteriorate over time. In the event of an accident this can lead to the release of fragments of the front airbag from the generator housing, increasing the risk of injury.
A12/01485/22 ↗The propellant may deteriorate over time due to heat cycles and exposure to moisture. If the airbag is deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through…
A12/01438/22 ↗Повний текст
The propellant may deteriorate over time due to heat cycles and exposure to moisture. If the airbag is deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.
The correct deployment of the passenger airbag cannot be guaranteed if the airbag is activated below -15 ° C inside the vehicle. Due to faulty seams in the airbag’s protective cover in the dashboard, the component…
A12/00286/22 ↗Повний текст
The correct deployment of the passenger airbag cannot be guaranteed if the airbag is activated below -15 ° C inside the vehicle. Due to faulty seams in the airbag’s protective cover in the dashboard, the component detached from the dashboard may break the windscreen. Glass fragments may damage the airbag, increasing the risk of injuries in the event of an accident.
The frame of the panoramic sliding sunroof was not bonded to the roof of the bodywork. The sliding sunroof may become detached from the roof when the vehicle is being driven, endangering other road-users.
A12/00057/22 ↗The propellant used in the airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling.…
INFO/00087/21 ↗Повний текст
The propellant used in the airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.
The vehicles affected may have been fitted with Takata gas generators which could allow the ingress of moisture and thus result in the degradation of the propellant. If the airbag deploys, this could cause the gas…
A12/01892/20 ↗Повний текст
The vehicles affected may have been fitted with Takata gas generators which could allow the ingress of moisture and thus result in the degradation of the propellant. If the airbag deploys, this could cause the gas generator to burst, causing metal parts to enter the vehicle's interior, causing injuries to the occupants of the vehicle.
The double rear safety-belt buckles may be damaged due to a manufacturing error and have reduced strength. This could reduce the protective/restraining effect of the safety belts, increasing the risk of injury in the…
A12/01683/20 ↗Повний текст
The double rear safety-belt buckles may be damaged due to a manufacturing error and have reduced strength. This could reduce the protective/restraining effect of the safety belts, increasing the risk of injury in the event of an accident
The double rear safety-belt buckles may be damaged due to a manufacturing error and have reduced strength. This could reduce the protective/restraining effect of the safety belts, increasing the risk of injury in the…
A12/00918/20 ↗Повний текст
The double rear safety-belt buckles may be damaged due to a manufacturing error and have reduced strength. This could reduce the protective/restraining effect of the safety belts, increasing the risk of injury in the event of an accident.
Due to incorrectly closed non-return valves in the vacuum lines, oil may be sucked into the brake booster, damaging its internal membrane.This may lead to the failure of braking power assistance, increasing the risk of…
A12/00567/20 ↗Повний текст
Due to incorrectly closed non-return valves in the vacuum lines, oil may be sucked into the brake booster, damaging its internal membrane.This may lead to the failure of braking power assistance, increasing the risk of an accident.
Cars initially used for internal purposes of Volkswagen AG might not have been correctly modified before they were sold to the general public. There is a possibility that certain safety systems of these cars are not…
A12/00222/20 ↗Повний текст
Cars initially used for internal purposes of Volkswagen AG might not have been correctly modified before they were sold to the general public. There is a possibility that certain safety systems of these cars are not correctly modified for street use.
Cars initially used for internal purposes of Volkswagen AG might not have been correctly modified before they were sold to the general public. There is a possibility that certain safety systems of these cars are not…
A12/00221/20 ↗Повний текст
Cars initially used for internal purposes of Volkswagen AG might not have been correctly modified before they were sold to the general public. There is a possibility that certain safety systems of these cars are not correctly modified for street use.
The belt pulley of the cam gear could break and the screws on the camshaft adjuster may loosen. As a result, engine oil can leak onto the road, posing a risk to the following traffic.
A12/1253/19 ↗On vehicles with a rear drum brake, the operational wear of the brake lining and use-related settlement of the drum brake may result in a loss of pre-tension on the parking brake cables and thus on the parking brake…
A12/0479/19 ↗Повний текст
On vehicles with a rear drum brake, the operational wear of the brake lining and use-related settlement of the drum brake may result in a loss of pre-tension on the parking brake cables and thus on the parking brake lever adjustment nut. As a consequence, the setting position for the adjustment nut could change when the parking brake is applied, thus extending the range of parking brake lever travel. This could result in the vehicle not being properly secured by the parking brake.
A poorly welded towing eye may have been included in the vehicle's tool kit. As a consequence, it could break off during towing and the vehicle being towed would lose forward propulsion and, on becoming detached, the…
A12/1319/18 ↗Повний текст
A poorly welded towing eye may have been included in the vehicle's tool kit. As a consequence, it could break off during towing and the vehicle being towed would lose forward propulsion and, on becoming detached, the towing rope may hit people or objects.
The safety-belt buckle for the rear left seat could open unintentionally. In this case, the passenger in the rear left seat would no longer be protected by the installed restraint system.
A12/1270/18 ↗The buckle for the seat belt for the rear left seat could open unintentionally. If this happened, the passenger in the seat would not be protected in the event of an accident.
A12/0861/18 ↗null Some vehicles have differences in the mixture ratio for the initiating device, which could lead to the driver and passenger airbag or seat-belt pre-tensioner not activating in the event of an accident.
A12/0387/17 ↗null In the affected vehicles, the mechanical rear-door child-proof locking system may have been damaged during manufacturing. This can cause the child-proof locking system to be switched off without this being noticed,…
A12/0863/16 ↗Повний текст
null In the affected vehicles, the mechanical rear-door child-proof locking system may have been damaged during manufacturing. This can cause the child-proof locking system to be switched off without this being noticed, especially in the event of strong vibrations, making it possible for the door to be opened from the inside by children.
null The airbag may deploy incorrectly as a result of defective welding of the gas generator.
A12/1493/15 ↗null The welded joint between the seat mounting and the backrest frame may not be secure and may break. In this case, the backrest may fail if the vehicle is involved in an accident.
A12/0878/15 ↗null An unintended airbag release can occur without forewarning.
A12/2170/14 ↗null Owing to pressure pulsations occurring in the fuel lines and engine vibrations during operation, vibration may be transmitted to the diesel fuel filter cover. This may lead to a fatigue crack on the filter cover in…
A12/1776/14 ↗Повний текст
null Owing to pressure pulsations occurring in the fuel lines and engine vibrations during operation, vibration may be transmitted to the diesel fuel filter cover. This may lead to a fatigue crack on the filter cover in the area of the inlet fitting and the possibility of a diesel fuel leak. This can lead to a traffic hazard.