AutoDefects
English

Citroën C4 2019: reliability

75% more mechanical failures than the class

5,173 MOT tests of Citroën C4 cars first registered in 2019: 9.1% failed for a mechanical defect; the class median at the same age and mileage is 5.2%.

Mechanical failure rate
9.1%
Class median, same age and mileage
5.2%
Failed MOT (any reason)
21.1%
MOT tests
5,173
Recalls
8

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km1,7815.6%2.9%
50-100k km2,90610.8%5.8%
100-150k km40610.8%9.5%
150k+ km8013.8%11.5%

What fails on this year

SystemMechanical fail
Suspension and wheels1.5%
Brakes5.1%
Engine, exhaust and emissions1.3%
Steering0.1%
Body, chassis and corrosion1.9%
Seat belts and airbags0.3%
Lights and electrics (wear)7.8%
Tyres (wear)6.2%
Wipers and windscreen (wear)3.2%
Other and plates (wear)0.2%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety Gate2015–2024

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Full text

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03151/25 ↗
  • EU Safety Gate2017–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Full text

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02655/25 ↗
  • EU Safety Gate2019–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01876/23 ↗
  • EU Safety Gate2017–2022

    The diesel particle filter may overheat and develop cracks. This could have a negative impact on the environment.

    A12/00270/23 ↗
  • EU Safety Gate2019

    The high-pressure pump has not been tightened to the engine with the correct torque. As a result, fuel may leak onto the road, posing a risk to the following traffic.

    A12/01463/20 ↗
  • EU Safety Gate2018, 2019

    The ballast in the rear part of the vehicle could be absent.This can impair the vehicle's directional stability, increasing the risk of an accident.

    A12/00127/20 ↗
Show 2 more recalls
  • EU Safety Gate2019

    The left rear brake hose may be in contact with the suspension spring. As a result, the hose will be damaged and brake fluid will leak, reducing the braking performance and increasing the risk of an accident.

    A12/00018/19 ↗
  • EU Safety Gate2019

    The rear axle connection may be inadequate and could break. As a result, the rear axle may be disconnected from the vehicle, increasing the risk of an accident.

    A12/0976/19 ↗