AutoDefects
English

Citroën C4 2014: reliability

54% more mechanical failures than the class

20,535 MOT tests of Citroën C4 cars first registered in 2014: 31.0% failed for a mechanical defect; the class median at the same age and mileage is 20.0%.

Mechanical failure rate
31.0%
Class median, same age and mileage
20.0%
Failed MOT (any reason)
42.1%
MOT tests
20,535
Recalls
19

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km41213.8%7.9%
50-100k km4,19823.9%15.3%
100-150k km8,89731.3%19.5%
150k+ km7,02835.8%24.3%

What fails on this year

SystemMechanical fail
Suspension and wheels16.2%
Brakes7.8%
Engine, exhaust and emissions1.9%
Steering7.0%
Body, chassis and corrosion9.4%
Seat belts and airbags2.2%
Lights and electrics (wear)15.6%
Tyres (wear)8.9%
Wipers and windscreen (wear)5.0%
Other and plates (wear)0.1%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2009–2017

    The airbag may deteriorate over time and if deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.

    SR/02977/25 ↗
  • EU Safety GateSerious2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Full text

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.

    A12/01043/21 ↗
  • EU Safety GateSerious2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Full text

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01369/21 ↗
  • EU Safety Gate2014–2018

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…

    Full text

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01186/21 ↗
  • EU Safety GateSerious2014–2017

    The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an…

    Full text

    The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01042/21 ↗
  • EU Safety Gate2011–2015

    The programming of the ‘Stop & Start’ system is inadequate. This may cause the engine to cut out if the battery charge level is lower than the minimum load threshold required by the ‘Stop & Start’ function. This could…

    Full text

    The programming of the ‘Stop & Start’ system is inadequate. This may cause the engine to cut out if the battery charge level is lower than the minimum load threshold required by the ‘Stop & Start’ function. This could increase the risk of an accident.

    A12/0645/19 ↗
Show 9 more recalls
  • EU Safety Gate2014

    The piston assembly in the rear brake caliper is not correct. As a consequence, the parking brake may become less effective or fail completely.

    A12/1553/18 ↗
  • EU Safety Gate2012–2016

    The axle of the parking brake caliper has not been correctly sealed and might corrode. As a consequence, the parking brake may become less effective or fail completely.

    A12/1485/18 ↗
  • EU Safety Gate2011–2016

    The strut for the hatchback door may be defective. As a result, the door could suddenly drop from a raised position.

    A12/0847/18 ↗
  • EU Safety Gate2012–2015

    Overheating of the engine may occur due to a problem with the engine control software. Overheating of the engine may lead to engine failure.

    A12/0492/18 ↗
  • EU Safety Gate2014–2016

    There could be a fault with the power relay for the engine control unit. This could lead to the engine stalling while driving.

    A12/0222/18 ↗
  • EU Safety Gate2011–2014

    null Water can enter the vent mechanism for the front windscreen-wiper motor. This could result in the windscreen-wiper motor becoming completely blocked because of internal corrosion. Failure of the windscreen-wipers…

    Full text

    null Water can enter the vent mechanism for the front windscreen-wiper motor. This could result in the windscreen-wiper motor becoming completely blocked because of internal corrosion. Failure of the windscreen-wipers whilst driving in rain would lead to reduced visibility for the driver.

    A12/1522/17 ↗
  • EU Safety Gate2011–2016

    null Due to corrosion, the dampers of the rear door could break. This could result in the rear door failing to stay in the open position, leading to injuries to the user.

    A12/1523/17 ↗
  • EU Safety Gate2013–2017

    null The power terminal on the starter is incorrectly positioned which could result in the electric starter cable being in contact with the exhaust gas recirculation valve. This could lead to wear of the insulation of…

    Full text

    null The power terminal on the starter is incorrectly positioned which could result in the electric starter cable being in contact with the exhaust gas recirculation valve. This could lead to wear of the insulation of the electric starter cable and the risk of a short-circuit occurring.

    A12/0997/17 ↗
  • EU Safety Gate2009–2016

    null The cable of the catch inside the bonnet may be insufficiently secured. As a result, the bonnet might open unexpectedly while the vehicle is in motion, which could cause an accident.

    A12/0396/17 ↗