AutoDefects
English

Citroën C4 2017: reliability

54% more mechanical failures than the class

988 MOT tests of Citroën C4 cars first registered in 2017: 16.3% failed for a mechanical defect; the class median at the same age and mileage is 10.6%.

Mechanical failure rate
16.3%
Class median, same age and mileage
10.6%
Failed MOT (any reason)
26.6%
MOT tests
988
Recalls
13

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km13810.9%4.3%
50-100k km35113.7%8.2%
100-150k km21418.2%12.0%
150k+ km28520.7%15.6%

What fails on this year

SystemMechanical fail
Suspension and wheels7.2%
Brakes5.4%
Engine, exhaust and emissions2.4%
Steering1.7%
Body, chassis and corrosion4.4%
Seat belts and airbags0.1%
Lights and electrics (wear)9.3%
Tyres (wear)5.8%
Wipers and windscreen (wear)4.9%
Other and plates (wear)0.2%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety Gate2015–2024

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Full text

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03151/25 ↗
  • EU Safety GateSerious2009–2017

    The airbag may deteriorate over time and if deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.

    SR/02977/25 ↗
  • EU Safety Gate2017–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Full text

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02655/25 ↗
  • EU Safety Gate2017–2022

    The diesel particle filter may overheat and develop cracks. This could have a negative impact on the environment.

    A12/00270/23 ↗
  • EU Safety GateSerious2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Full text

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.

    A12/01043/21 ↗
  • EU Safety GateSerious2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Full text

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01369/21 ↗
Show 7 more recalls
  • EU Safety Gate2014–2018

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…

    Full text

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01186/21 ↗
  • EU Safety GateSerious2014–2017

    The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an…

    Full text

    The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01042/21 ↗
  • EU Safety Gate2016–2018

    The cars have an incorrect version of the engine's software, leading to errors in the cooling strategy and malfunction of the engine's "high temperature" warning system. This could lead to unnoticed overheating of the…

    Full text

    The cars have an incorrect version of the engine's software, leading to errors in the cooling strategy and malfunction of the engine's "high temperature" warning system. This could lead to unnoticed overheating of the engine, which may leak oil and also fail, increasing the risk of accident.

    A12/1354/18 ↗
  • EU Safety GateSerious2017

    Certain airbag control units might have received a shock during transportation to the vehicle assembly plant, which might cause an internal fault. In the event of an accident, the airbags might not work correctly.

    A12/0778/18 ↗
  • EU Safety Gate2016, 2017

    The outer skin of the bonnet may not be properly glued to the bonnet lining. This could lead to the loss of the outer skin of the bonnet causing an accident.

    A12/1798/17 ↗
  • EU Safety Gate2015–2017

    null The cable of the bonnet release is insufficiently secured, which could lead to the bonnet opening unexpectedly whilst driving.

    A12/1339/17 ↗
  • EU Safety Gate2013–2017

    null The power terminal on the starter is incorrectly positioned which could result in the electric starter cable being in contact with the exhaust gas recirculation valve. This could lead to wear of the insulation of…

    Full text

    null The power terminal on the starter is incorrectly positioned which could result in the electric starter cable being in contact with the exhaust gas recirculation valve. This could lead to wear of the insulation of the electric starter cable and the risk of a short-circuit occurring.

    A12/0997/17 ↗