Citroën C4 2016: reliability
17,450 MOT tests of Citroën C4 cars first registered in 2016: 21.9% failed for a mechanical defect; the class median at the same age and mileage is 12.8%.
- Mechanical failure rate
- 21.9%
- Class median, same age and mileage
- 12.8%
- Failed MOT (any reason)
- 34.4%
- MOT tests
- 17,450
- Recalls
- 24
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 969 | 10.4% | 6.2% |
| 50-100k km | 6,882 | 19.0% | 9.3% |
| 100-150k km | 6,781 | 24.5% | 15.0% |
| 150k+ km | 2,818 | 26.4% | 18.1% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03151/25 ↗Full text
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
The airbag may deteriorate over time and if deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.
SR/02977/25 ↗The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…
A12/01043/21 ↗Full text
The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.
The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…
A12/01369/21 ↗Full text
The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01186/21 ↗Full text
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an…
A12/01042/21 ↗Full text
The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Show 9 more recalls
The parking brake may lose its effectiveness, over the vehicle’s service life. This will increase the risk of an accident.
A12/00130/21 ↗The axle of the parking brake caliper has not been correctly sealed and might corrode. As a consequence, the parking brake may become less effective or fail completely.
A12/1485/18 ↗The cars have an incorrect version of the engine's software, leading to errors in the cooling strategy and malfunction of the engine's "high temperature" warning system. This could lead to unnoticed overheating of the…
A12/1354/18 ↗Full text
The cars have an incorrect version of the engine's software, leading to errors in the cooling strategy and malfunction of the engine's "high temperature" warning system. This could lead to unnoticed overheating of the engine, which may leak oil and also fail, increasing the risk of accident.
The strut for the hatchback door may be defective. As a result, the door could suddenly drop from a raised position.
A12/0847/18 ↗An internal component of the door locks could be defective. The defect could prevent a door from being locked or cause a door to open unexpectedly during driving.
A12/0270/18 ↗There could be a fault with the power relay for the engine control unit. This could lead to the engine stalling while driving.
A12/0222/18 ↗The outer skin of the bonnet may not be properly glued to the bonnet lining. This could lead to the loss of the outer skin of the bonnet causing an accident.
A12/1798/17 ↗null Due to corrosion, the dampers of the rear door could break. This could result in the rear door failing to stay in the open position, leading to injuries to the user.
A12/1523/17 ↗null The cable of the bonnet release is insufficiently secured, which could lead to the bonnet opening unexpectedly whilst driving.
A12/1339/17 ↗