AutoDefects
English

Citroën C4 2012: reliability

30% more mechanical failures than the class

8,400 MOT tests of Citroën C4 cars first registered in 2012: 30.3% failed for a mechanical defect; the class median at the same age and mileage is 23.3%.

Mechanical failure rate
30.3%
Class median, same age and mileage
23.3%
Failed MOT (any reason)
44.6%
MOT tests
8,400
Recalls
12

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km10614.2%8.9%
50-100k km1,14420.3%15.4%
100-150k km2,98130.1%21.4%
150k+ km4,16933.6%27.2%

What fails on this year

SystemMechanical fail
Suspension and wheels16.5%
Brakes11.0%
Engine, exhaust and emissions3.1%
Steering5.0%
Body, chassis and corrosion7.6%
Seat belts and airbags0.6%
Lights and electrics (wear)20.8%
Tyres (wear)9.2%
Wipers and windscreen (wear)6.3%
Other and plates (wear)0.2%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2009–2017

    The airbag may deteriorate over time and if deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.

    SR/02977/25 ↗
  • EU Safety GateSerious2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Full text

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.

    A12/01043/21 ↗
  • EU Safety GateSerious2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Full text

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01369/21 ↗
  • EU Safety Gate2011–2015

    The programming of the ‘Stop & Start’ system is inadequate. This may cause the engine to cut out if the battery charge level is lower than the minimum load threshold required by the ‘Stop & Start’ function. This could…

    Full text

    The programming of the ‘Stop & Start’ system is inadequate. This may cause the engine to cut out if the battery charge level is lower than the minimum load threshold required by the ‘Stop & Start’ function. This could increase the risk of an accident.

    A12/0645/19 ↗
  • EU Safety Gate2012–2016

    The axle of the parking brake caliper has not been correctly sealed and might corrode. As a consequence, the parking brake may become less effective or fail completely.

    A12/1485/18 ↗
  • EU Safety Gate2011–2016

    The strut for the hatchback door may be defective. As a result, the door could suddenly drop from a raised position.

    A12/0847/18 ↗
Show 6 more recalls
  • EU Safety Gate2012–2015

    Overheating of the engine may occur due to a problem with the engine control software. Overheating of the engine may lead to engine failure.

    A12/0492/18 ↗
  • EU Safety Gate2011–2014

    null Water can enter the vent mechanism for the front windscreen-wiper motor. This could result in the windscreen-wiper motor becoming completely blocked because of internal corrosion. Failure of the windscreen-wipers…

    Full text

    null Water can enter the vent mechanism for the front windscreen-wiper motor. This could result in the windscreen-wiper motor becoming completely blocked because of internal corrosion. Failure of the windscreen-wipers whilst driving in rain would lead to reduced visibility for the driver.

    A12/1522/17 ↗
  • EU Safety Gate2011–2016

    null Due to corrosion, the dampers of the rear door could break. This could result in the rear door failing to stay in the open position, leading to injuries to the user.

    A12/1523/17 ↗
  • EU Safety Gate2009–2016

    null The cable of the catch inside the bonnet may be insufficiently secured. As a result, the bonnet might open unexpectedly while the vehicle is in motion, which could cause an accident.

    A12/0396/17 ↗
  • EU Safety Gate2012–2014

    null In the case of negative exterior temperatures, and after repeated activation of the fuel heater, an electric connection on the cover of the fuel heater can overheat. This can cause the cover to melt, allowing air…

    Full text

    null In the case of negative exterior temperatures, and after repeated activation of the fuel heater, an electric connection on the cover of the fuel heater can overheat. This can cause the cover to melt, allowing air to enter the fuel system which could lead to stalling of the engine and loss of control of the car.

    A12/1484/15 ↗
  • EU Safety Gate2012, 2013

    null The reverse locking ring of the gear lever might break. As a result first gear may be engaged instead of reverse, which could lead to the car going the wrong way and causing an accident.

    A12/0325/15 ↗