Citroën C4 2017: Zuverlässigkeit
988 MOT-Prüfungen von Citroën C4 mit Erstzulassung 2017: 16,3% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 9,1%.
- Technische Mängelquote
- 16,3%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 9,1%
- Durchgefallen (jeder Grund)
- 26,6%
- MOT-Prüfungen
- 988
- Rückrufe
- 13
Was nach Laufleistung ausfällt
| Laufleistung | Prüfungen | Technische Mängel | Klassenmedian |
|---|---|---|---|
| 0-50k km | 138 | 10,9% | 2,8% |
| 50-100k km | 351 | 13,7% | 7,4% |
| 100-150k km | 214 | 18,2% | 10,8% |
| 150k+ km | 285 | 20,7% | 13,0% |
Was bei diesem Baujahr ausfällt
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03151/25 ↗Volltext
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
The airbag may deteriorate over time and if deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.
SR/02977/25 ↗Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02655/25 ↗Volltext
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
The diesel particle filter may overheat and develop cracks. This could have a negative impact on the environment.
A12/00270/23 ↗The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…
A12/01043/21 ↗Volltext
The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.
The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…
A12/01369/21 ↗Volltext
The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
7 weitere Rückrufe anzeigen
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01186/21 ↗Volltext
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an…
A12/01042/21 ↗Volltext
The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The cars have an incorrect version of the engine's software, leading to errors in the cooling strategy and malfunction of the engine's "high temperature" warning system. This could lead to unnoticed overheating of the…
A12/1354/18 ↗Volltext
The cars have an incorrect version of the engine's software, leading to errors in the cooling strategy and malfunction of the engine's "high temperature" warning system. This could lead to unnoticed overheating of the engine, which may leak oil and also fail, increasing the risk of accident.
Certain airbag control units might have received a shock during transportation to the vehicle assembly plant, which might cause an internal fault. In the event of an accident, the airbags might not work correctly.
A12/0778/18 ↗The outer skin of the bonnet may not be properly glued to the bonnet lining. This could lead to the loss of the outer skin of the bonnet causing an accident.
A12/1798/17 ↗null The cable of the bonnet release is insufficiently secured, which could lead to the bonnet opening unexpectedly whilst driving.
A12/1339/17 ↗null The power terminal on the starter is incorrectly positioned which could result in the electric starter cable being in contact with the exhaust gas recirculation valve. This could lead to wear of the insulation of…
A12/0997/17 ↗Volltext
null The power terminal on the starter is incorrectly positioned which could result in the electric starter cable being in contact with the exhaust gas recirculation valve. This could lead to wear of the insulation of the electric starter cable and the risk of a short-circuit occurring.