AutoDefects
Deutsch

Citroën C4 2010: Zuverlässigkeit

28% mehr technische Mängel als die Klasse

6.084 MOT-Prüfungen von Citroën C4 mit Erstzulassung 2010: 36,3% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 28,5%.

Technische Mängelquote
36,3%
Klassenmedian, gleiches Alter und gleiche Laufleistung
28,5%
Durchgefallen (jeder Grund)
52,1%
MOT-Prüfungen
6.084
Rückrufe
4

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km3423,5%11,3%
50-100k km52025,2%18,2%
100-150k km1.75932,4%26,1%
150k+ km3.77139,8%31,1%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder17,7%
Bremsen12,3%
Motor, Abgasanlage und Emissionen8,0%
Lenkung6,0%
Karosserie, Rahmen und Rost12,1%
Gurte und Airbags2,2%
Licht und Elektrik (Verschleiß)32,5%
Reifen (Verschleiß)9,0%
Wischer und Scheibe (Verschleiß)7,7%
Sonstiges und Kennzeichen (Verschleiß)0,4%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst2009–2017

    The airbag may deteriorate over time and if deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.

    SR/02977/25 ↗
  • EU Safety GateErnst2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Volltext

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.

    A12/01043/21 ↗
  • EU Safety GateErnst2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Volltext

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01369/21 ↗
  • EU Safety Gate2009–2016

    null The cable of the catch inside the bonnet may be insufficiently secured. As a result, the bonnet might open unexpectedly while the vehicle is in motion, which could cause an accident.

    A12/0396/17 ↗