AutoDefects
Polski

Citroën C4 2010: niezawodność

o 28% więcej usterek mechanicznych niż w klasie

6084 badań MOT egzemplarzy Citroën C4 zarejestrowanych po raz pierwszy w 2010: 36,3% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 28,5%.

Usterki mechaniczne
36,3%
Mediana klasy, ten sam wiek i przebieg
28,5%
Negatywne badanie (dowolny powód)
52,1%
badań MOT
6084
Akcje przywoławcze
4

Co się psuje w zależności od przebiegu

PrzebiegBadaniaUsterki mechaniczneMediana klasy
0-50k km3423,5%11,3%
50-100k km52025,2%18,2%
100-150k km175932,4%26,1%
150k+ km377139,8%31,1%

Co się psuje w tym roczniku

UkładUsterki mechaniczne
Zawieszenie i koła17,7%
Hamulce12,3%
Silnik, wydech i emisja8,0%
Układ kierowniczy6,0%
Nadwozie, podwozie i korozja12,1%
Pasy i poduszki powietrzne2,2%
Oświetlenie i elektryka (eksploatacja)32,5%
Opony (eksploatacja)9,0%
Wycieraczki i szyba (eksploatacja)7,7%
Inne i tablice (eksploatacja)0,4%

Oficjalne akcje przywoławcze

Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.

  • EU Safety GatePoważne2009–2017

    The airbag may deteriorate over time and if deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.

    SR/02977/25 ↗
  • EU Safety GatePoważne2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Pełny tekst

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.

    A12/01043/21 ↗
  • EU Safety GatePoważne2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Pełny tekst

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01369/21 ↗
  • EU Safety Gate2009–2016

    null The cable of the catch inside the bonnet may be insufficiently secured. As a result, the bonnet might open unexpectedly while the vehicle is in motion, which could cause an accident.

    A12/0396/17 ↗