AutoDefects
Polski

Kompakty (segment C)

Citroën C4 — niezawodność

W 135 745 brytyjskich badaniach MOT 27,0% egzemplarzy Citroën C4 nie przeszło z powodu usterki mechanicznej lub nadwozia. Mediana dla kompaktu w tym samym wieku i z tym samym przebiegiem: 18,4%.

43na 100Poniżej średniejo 47% więcej usterek mechanicznych niż w klasie
Najlepsze roczniki
—
Roczniki z największą liczbą usterek
2016, 2020, 2021
Słaby punkt przy dużym przebiegu
Nadwozie, podwozie i korozja, Układ kierowniczy, Zawieszenie i koła
Oficjalne akcje przywoławcze
9 akcji, poważnych: 3
Usterki mechaniczne
27,0%
Mediana klasy, ten sam wiek i przebieg
18,4%
badań MOT
135 745
Skargi właścicieli w USA
0

Odsetek usterek według roku pierwszej rejestracji

Odsetek usterek mechanicznych na badaniu MOT w 2024 r. według roku pierwszej rejestracji, wobec mediany klasy w tym samym wieku i z tym samym przebiegiem.

Ten modelMediana klasy
0%14%28%2005: 33,1%2005 Mediana klasy: 32,5%052006: 36,2%2006 Mediana klasy: 31,8%062007: 35,7%2007 Mediana klasy: 33,5%072008: 38,3%2008 Mediana klasy: 33,1%082009: 37,7%2009 Mediana klasy: 30,4%092010: 36,3%2010 Mediana klasy: 29,4%102011: 33,0%2011 Mediana klasy: 26,5%112012: 30,3%2012 Mediana klasy: 23,0%122013: 31,1%2013 Mediana klasy: 20,4%132014: 31,0%2014 Mediana klasy: 19,1%142015: 24,2%2015 Mediana klasy: 13,5%152016: 21,9%2016 Mediana klasy: 10,7%162017: 16,3%2017 Mediana klasy: 9,1%172018: 11,1%2018 Mediana klasy: 6,6%182019: 9,1%2019 Mediana klasy: 5,1%192020: 7,0%2020 Mediana klasy: 3,9%202021: 6,3%2021 Mediana klasy: 2,8%212022: 5,1%2022 Mediana klasy: 2,1%22
RokBadaniaUsterki mechaniczneMediana klasyWszystkie usterkiAkcje
20222975,1%2,1%13,1%5
202151926,3%2,8%17,9%2
202017637,0%3,9%15,8%2
201951739,1%5,1%21,1%2
2018277711,1%6,6%23,5%2
201798816,3%9,1%26,6%3
201617 45021,9%10,7%34,4%2
201527 53124,2%13,5%37,7%2
201420 53531,0%19,1%42,1%1
201312 10131,1%20,4%44,8%1
2012840030,3%23,0%44,6%1
2011698533,0%26,5%45,2%1
2010608436,3%29,4%52,1%1
2009509337,7%30,4%51,9%1
2008710938,3%33,1%53,1%0
2007549035,7%33,5%50,7%0
2006180936,2%31,8%51,2%0
200592133,1%32,5%46,8%0

Co się psuje w zależności od przebiegu

Odsetek badań niezaliczonych z powodu danego układu. Elementy eksploatacyjne (żarówki, opony, wycieraczki, tablice) nie wpływają na wskaźnik niezawodności.

Układ0-50k km50-100k km100-150k km150k+ km
Usterki mechaniczne7,1% (3,5)18,8% (10,4)28,7% (18,6)35,6% (27,1)
Badania10 18932 85946 83345 864
Zawieszenie i koła2,1% (1,1)6,7% (3,9)13,3% (9,5)19,2% (17,3)
Hamulce2,7% (1,5)5,7% (4,6)8,7% (8,0)12,5% (11,7)
Silnik, wydech i emisja0,8% (0,6)1,7% (0,9)3,1% (2,5)5,3% (5,1)
Układ kierowniczy0,1% (0,1)1,7% (0,5)4,5% (0,9)6,6% (2,2)
Nadwozie, podwozie i korozja2,4% (0,2)7,5% (0,7)9,7% (2,2)10,2% (5,1)
Pasy i poduszki powietrzne0,3% (0,1)0,6% (0,3)1,2% (0,6)2,0% (1,5)
Oświetlenie i elektryka (eksploatacja)3,8% (2,4)11,2% (6,3)19,1% (14,2)25,8% (22,2)
Opony (eksploatacja)3,9% (3,9)6,5% (6,1)8,7% (7,4)10,0% (8,8)
Wycieraczki i szyba (eksploatacja)4,2% (2,7)4,9% (3,5)6,0% (5,0)7,2% (6,3)
Inne i tablice (eksploatacja)0,1% (0,1)0,2% (0,2)0,2% (0,3)0,4% (0,6)

(…) = Mediana klasy, ten sam wiek i przebieg

Lista kontrolna dla mechanika przed zakupem

Na podstawie układów, w których ten model psuje się częściej niż jego klasa przy przebiegu od 100 000 km, oraz otwartych akcji przywoławczych.

  1. Nadwozie i podwozie: obejrzyj progi, ramy pomocnicze, punkty podnoszenia i podłogę pod kątem korozji i śladów napraw.
  2. Układ kierowniczy: sprawdź luzy przekładni, drążków i końcówek, wycieki wspomagania i hałas przy pełnym skręcie.
  3. Zawieszenie i koła: sprawdź wahacze, tuleje, sworznie, sprężyny i amortyzatory pod kątem luzów, pęknięć i wycieków; zwróć uwagę na nierówne zużycie opon.
  4. Akcje przywoławcze: poproś o potwierdzenie wykonania otwartych akcji dla tego modelu (ASO sprawdzi po VIN).

Oficjalne akcje przywoławcze

Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.

  • EU Safety GatePoważne2023–2026

    There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and…

    Pełny tekst

    There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and contact between these components can lead to water infiltration, causing an electric arc which may trigger a thermal event, such as overheating. There is a risk of fire.

    SR/00841/26 ↗
  • EU Safety Gate2023

    The rear axle that does not meet specifications may develop cracks and fracture, leading to reduced vehicle control and increasing the risk of accidents and injuries.

    SR/00174/26 ↗
  • EU Safety GatePoważne2022–2025

    The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.

    SR/02935/25 ↗
  • EU Safety Gate2015–2024

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Pełny tekst

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03151/25 ↗
  • EU Safety GatePoważne2009–2017

    The airbag may deteriorate over time and if deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.

    SR/02977/25 ↗
  • EU Safety Gate2017–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Pełny tekst

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02655/25 ↗
Pokaż jeszcze 3 akcji
  • EU Safety Gate2024

    The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the…

    Pełny tekst

    The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the deactivation of stability control due to damage to the pressure sensor. The brake fluid could come into contact with the printed circuit board and result in the deactivation of all control functions (including the anti-lock system and electronic brake force distribution).

    SR/02103/25 ↗
  • EU Safety Gate2022, 2023

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…

    Pełny tekst

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.

    SR/01423/25 ↗
  • EU Safety Gate2022, 2023

    Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory…

    Pełny tekst

    Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    SR/00435/25 ↗