AutoDefects
Español

Compactos

Fiabilidad del Citroën C4

En 135.745 inspecciones MOT británicas, el 27,0 % de los Citroën C4 no pasó por un defecto mecánico o estructural. La mediana de un compacto con la misma edad y kilometraje: 18,4 %.

43de 100Por debajo de la media47 % más fallos mecánicos que su clase
Mejores años
—
Años con más fallos
2016, 2020, 2021
Punto débil con kilometraje alto
Carrocería, bastidor y corrosión, Dirección, Suspensión y ruedas
Llamadas a revisión oficiales
9 llamadas a revisión, 3 graves
Tasa de fallo mecánico
27,0%
Mediana de la clase, misma edad y kilometraje
18,4%
inspecciones MOT
135.745
Quejas en EE. UU.
0

Tasa de fallo por año de primera matriculación

Tasa de fallo mecánico en la MOT de 2024 según el año de primera matriculación, frente a la mediana de su clase con la misma edad y kilometraje.

Este modeloMediana de la clase
0%14%28%2005: 33,1%2005 Mediana de la clase: 32,5%052006: 36,2%2006 Mediana de la clase: 31,8%062007: 35,7%2007 Mediana de la clase: 33,5%072008: 38,3%2008 Mediana de la clase: 33,1%082009: 37,7%2009 Mediana de la clase: 30,4%092010: 36,3%2010 Mediana de la clase: 29,4%102011: 33,0%2011 Mediana de la clase: 26,5%112012: 30,3%2012 Mediana de la clase: 23,0%122013: 31,1%2013 Mediana de la clase: 20,4%132014: 31,0%2014 Mediana de la clase: 19,1%142015: 24,2%2015 Mediana de la clase: 13,5%152016: 21,9%2016 Mediana de la clase: 10,7%162017: 16,3%2017 Mediana de la clase: 9,1%172018: 11,1%2018 Mediana de la clase: 6,6%182019: 9,1%2019 Mediana de la clase: 5,1%192020: 7,0%2020 Mediana de la clase: 3,9%202021: 6,3%2021 Mediana de la clase: 2,8%212022: 5,1%2022 Mediana de la clase: 2,1%22
AñoInspeccionesFallo mecánicoMediana de la claseCualquier falloLlamadas
20222975,1%2,1%13,1%5
202151926,3%2,8%17,9%2
202017637,0%3,9%15,8%2
201951739,1%5,1%21,1%2
2018277711,1%6,6%23,5%2
201798816,3%9,1%26,6%3
201617.45021,9%10,7%34,4%2
201527.53124,2%13,5%37,7%2
201420.53531,0%19,1%42,1%1
201312.10131,1%20,4%44,8%1
2012840030,3%23,0%44,6%1
2011698533,0%26,5%45,2%1
2010608436,3%29,4%52,1%1
2009509337,7%30,4%51,9%1
2008710938,3%33,1%53,1%0
2007549035,7%33,5%50,7%0
2006180936,2%31,8%51,2%0
200592133,1%32,5%46,8%0

Qué falla según el kilometraje

Porcentaje de inspecciones suspendidas en cada sistema. Los elementos de desgaste (bombillas, neumáticos, escobillas, matrículas) no cuentan para el índice.

Sistema0-50k km50-100k km100-150k km150k+ km
Fallo mecánico7,1% (3,5)18,8% (10,4)28,7% (18,6)35,6% (27,1)
Inspecciones10.18932.85946.83345.864
Suspensión y ruedas2,1% (1,1)6,7% (3,9)13,3% (9,5)19,2% (17,3)
Frenos2,7% (1,5)5,7% (4,6)8,7% (8,0)12,5% (11,7)
Motor, escape y emisiones0,8% (0,6)1,7% (0,9)3,1% (2,5)5,3% (5,1)
Dirección0,1% (0,1)1,7% (0,5)4,5% (0,9)6,6% (2,2)
Carrocería, bastidor y corrosión2,4% (0,2)7,5% (0,7)9,7% (2,2)10,2% (5,1)
Cinturones y airbags0,3% (0,1)0,6% (0,3)1,2% (0,6)2,0% (1,5)
Luces y electricidad (desgaste)3,8% (2,4)11,2% (6,3)19,1% (14,2)25,8% (22,2)
Neumáticos (desgaste)3,9% (3,9)6,5% (6,1)8,7% (7,4)10,0% (8,8)
Escobillas y parabrisas (desgaste)4,2% (2,7)4,9% (3,5)6,0% (5,0)7,2% (6,3)
Otros y matrículas (desgaste)0,1% (0,1)0,2% (0,2)0,2% (0,3)0,4% (0,6)

(…) = Mediana de la clase, misma edad y kilometraje

Lista de comprobación para el mecánico antes de comprar

Basada en los sistemas en los que este modelo falla más que su clase a partir de 100.000 km y en las llamadas a revisión abiertas.

  1. Carrocería y bastidor: revisar estribos, subchasis, puntos de elevación y suelo (corrosión y reparaciones).
  2. Dirección: holgura de cremallera, bieletas y rótulas, fugas de la asistencia y ruidos con el volante a tope.
  3. Suspensión y ruedas: revisar brazos, silentblocks, rótulas, muelles y amortiguadores (holguras, grietas, fugas); buscar desgaste irregular de neumáticos.
  4. Llamadas a revisión: pide prueba de que se han hecho las campañas abiertas de este modelo (el concesionario lo comprueba por VIN).

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety GateGrave2023–2026

    There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and…

    Texto completo

    There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and contact between these components can lead to water infiltration, causing an electric arc which may trigger a thermal event, such as overheating. There is a risk of fire.

    SR/00841/26 ↗
  • EU Safety Gate2023

    The rear axle that does not meet specifications may develop cracks and fracture, leading to reduced vehicle control and increasing the risk of accidents and injuries.

    SR/00174/26 ↗
  • EU Safety GateGrave2022–2025

    The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.

    SR/02935/25 ↗
  • EU Safety Gate2015–2024

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Texto completo

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03151/25 ↗
  • EU Safety GateGrave2009–2017

    The airbag may deteriorate over time and if deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.

    SR/02977/25 ↗
  • EU Safety Gate2017–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Texto completo

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02655/25 ↗
Mostrar 3 llamadas más
  • EU Safety Gate2024

    The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the…

    Texto completo

    The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the deactivation of stability control due to damage to the pressure sensor. The brake fluid could come into contact with the printed circuit board and result in the deactivation of all control functions (including the anti-lock system and electronic brake force distribution).

    SR/02103/25 ↗
  • EU Safety Gate2022, 2023

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…

    Texto completo

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.

    SR/01423/25 ↗
  • EU Safety Gate2022, 2023

    Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory…

    Texto completo

    Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    SR/00435/25 ↗