AutoDefects
Español

Citroën C4 2019: fiabilidad

75 % más fallos mecánicos que su clase

5173 inspecciones MOT de Citroën C4 matriculados por primera vez en 2019: el 9,1 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 5,2 %.

Tasa de fallo mecánico
9,1%
Mediana de la clase, misma edad y kilometraje
5,2%
No pasó la MOT (cualquier motivo)
21,1%
inspecciones MOT
5173
Llamadas a revisión
8

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km17815,6%2,9%
50-100k km290610,8%5,8%
100-150k km40610,8%9,5%
150k+ km8013,8%11,5%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas1,5%
Frenos5,1%
Motor, escape y emisiones1,3%
Dirección0,1%
Carrocería, bastidor y corrosión1,9%
Cinturones y airbags0,3%
Luces y electricidad (desgaste)7,8%
Neumáticos (desgaste)6,2%
Escobillas y parabrisas (desgaste)3,2%
Otros y matrículas (desgaste)0,2%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety Gate2015–2024

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Texto completo

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03151/25 ↗
  • EU Safety Gate2017–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Texto completo

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02655/25 ↗
  • EU Safety Gate2019–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01876/23 ↗
  • EU Safety Gate2017–2022

    The diesel particle filter may overheat and develop cracks. This could have a negative impact on the environment.

    A12/00270/23 ↗
  • EU Safety Gate2019

    The high-pressure pump has not been tightened to the engine with the correct torque. As a result, fuel may leak onto the road, posing a risk to the following traffic.

    A12/01463/20 ↗
  • EU Safety Gate2018, 2019

    The ballast in the rear part of the vehicle could be absent.This can impair the vehicle's directional stability, increasing the risk of an accident.

    A12/00127/20 ↗
Mostrar 2 llamadas más
  • EU Safety Gate2019

    The left rear brake hose may be in contact with the suspension spring. As a result, the hose will be damaged and brake fluid will leak, reducing the braking performance and increasing the risk of an accident.

    A12/00018/19 ↗
  • EU Safety Gate2019

    The rear axle connection may be inadequate and could break. As a result, the rear axle may be disconnected from the vehicle, increasing the risk of an accident.

    A12/0976/19 ↗