AutoDefects
Español

Citroën C4 2018: fiabilidad

39 % más fallos mecánicos que su clase

2777 inspecciones MOT de Citroën C4 matriculados por primera vez en 2018: el 11,1 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 8,0 %.

Tasa de fallo mecánico
11,1%
Mediana de la clase, misma edad y kilometraje
8,0%
No pasó la MOT (cualquier motivo)
23,5%
inspecciones MOT
2777
Llamadas a revisión
8

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km5518,0%3,7%
50-100k km159711,4%8,3%
100-150k km46613,1%10,3%
150k+ km16312,9%12,5%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas2,9%
Frenos5,2%
Motor, escape y emisiones1,5%
Dirección0,5%
Carrocería, bastidor y corrosión2,6%
Cinturones y airbags0,3%
Luces y electricidad (desgaste)9,2%
Neumáticos (desgaste)6,3%
Escobillas y parabrisas (desgaste)3,6%
Otros y matrículas (desgaste)0,1%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety Gate2015–2024

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Texto completo

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03151/25 ↗
  • EU Safety Gate2017–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Texto completo

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02655/25 ↗
  • EU Safety Gate2017–2022

    The diesel particle filter may overheat and develop cracks. This could have a negative impact on the environment.

    A12/00270/23 ↗
  • EU Safety Gate2014–2018

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…

    Texto completo

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01186/21 ↗
  • EU Safety Gate2018, 2019

    The ballast in the rear part of the vehicle could be absent.This can impair the vehicle's directional stability, increasing the risk of an accident.

    A12/00127/20 ↗
  • EU Safety Gate2018

    The weight distribution of the vehicle may, under certain conditions, be inadequate. This may impair driving stability, increasing the risk of an accident.

    A12/0610/19 ↗
Mostrar 2 llamadas más
  • EU Safety Gate2018

    The cylinder-housing oil gallery plug may not have been correctly tightened. As a consequence oil might leak which presents a skid hazard for following traffic.

    A12/1363/18 ↗
  • EU Safety Gate2016–2018

    The cars have an incorrect version of the engine's software, leading to errors in the cooling strategy and malfunction of the engine's "high temperature" warning system. This could lead to unnoticed overheating of the…

    Texto completo

    The cars have an incorrect version of the engine's software, leading to errors in the cooling strategy and malfunction of the engine's "high temperature" warning system. This could lead to unnoticed overheating of the engine, which may leak oil and also fail, increasing the risk of accident.

    A12/1354/18 ↗