Citroën C4 2018 : fiabilité
2 777 contrôles MOT de Citroën C4 immatriculées pour la première fois en 2018 : 11,1 % recalées pour un défaut mécanique ; la médiane de la catégorie au même âge et kilométrage est de 8,0 %.
- Taux de défaillance mécanique
- 11,1%
- Médiane de la catégorie, même âge et kilométrage
- 8,0%
- Recalés (toute raison)
- 23,5%
- contrôles MOT
- 2 777
- Rappels
- 8
Ce qui lâche selon le kilométrage
| Kilométrage | Contrôles | Défaillance mécanique | Médiane catégorie |
|---|---|---|---|
| 0-50k km | 551 | 8,0% | 3,7% |
| 50-100k km | 1 597 | 11,4% | 8,3% |
| 100-150k km | 466 | 13,1% | 10,3% |
| 150k+ km | 163 | 12,9% | 12,5% |
Ce qui lâche sur cette année
Rappels officiels
Rappels publiés par la NHTSA (États-Unis) et l’EU Safety Gate qui citent ce modèle. Vérifiez par VIN si une voiture précise est concernée.
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03151/25 ↗Texte complet
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02655/25 ↗Texte complet
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
The diesel particle filter may overheat and develop cracks. This could have a negative impact on the environment.
A12/00270/23 ↗The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01186/21 ↗Texte complet
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The ballast in the rear part of the vehicle could be absent.This can impair the vehicle's directional stability, increasing the risk of an accident.
A12/00127/20 ↗The weight distribution of the vehicle may, under certain conditions, be inadequate. This may impair driving stability, increasing the risk of an accident.
A12/0610/19 ↗
Afficher 2 rappels de plus
The cylinder-housing oil gallery plug may not have been correctly tightened. As a consequence oil might leak which presents a skid hazard for following traffic.
A12/1363/18 ↗The cars have an incorrect version of the engine's software, leading to errors in the cooling strategy and malfunction of the engine's "high temperature" warning system. This could lead to unnoticed overheating of the…
A12/1354/18 ↗Texte complet
The cars have an incorrect version of the engine's software, leading to errors in the cooling strategy and malfunction of the engine's "high temperature" warning system. This could lead to unnoticed overheating of the engine, which may leak oil and also fail, increasing the risk of accident.