AutoDefects
Français

Citroën C4 2015 : fiabilité

46 % de défaillances mécaniques en plus que la catégorie

27 531 contrôles MOT de Citroën C4 immatriculées pour la première fois en 2015 : 24,2 % recalées pour un défaut mécanique ; la médiane de la catégorie au même âge et kilométrage est de 16,7 %.

Taux de défaillance mécanique
24,2%
Médiane de la catégorie, même âge et kilométrage
16,7%
Recalés (toute raison)
37,7%
contrôles MOT
27 531
Rappels
22

Ce qui lâche selon le kilométrage

KilométrageContrôlesDéfaillance mécaniqueMédiane catégorie
0-50k km91810,6%6,2%
50-100k km8 13918,8%11,9%
100-150k km12 14725,9%18,0%
150k+ km6 32730,1%21,7%

Ce qui lâche sur cette année

OrganeDéfaillance mécanique
Suspension et roues10,2%
Freins7,4%
Moteur, échappement et émissions3,2%
Direction3,5%
Carrosserie, châssis et corrosion8,2%
Ceintures et airbags0,7%
Éclairage et électricité (usure)15,8%
Pneus (usure)8,5%
Essuie-glaces et pare-brise (usure)5,8%
Divers et plaques (usure)0,2%

Rappels officiels

Rappels publiés par la NHTSA (États-Unis) et l’EU Safety Gate qui citent ce modèle. Vérifiez par VIN si une voiture précise est concernée.

  • EU Safety Gate2015–2024

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Texte complet

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03151/25 ↗
  • EU Safety GateGrave2009–2017

    The airbag may deteriorate over time and if deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.

    SR/02977/25 ↗
  • EU Safety GateGrave2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Texte complet

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.

    A12/01043/21 ↗
  • EU Safety GateGrave2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Texte complet

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01369/21 ↗
  • EU Safety Gate2014–2018

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…

    Texte complet

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01186/21 ↗
  • EU Safety GateGrave2014–2017

    The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an…

    Texte complet

    The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01042/21 ↗
Afficher 9 rappels de plus
  • EU Safety Gate2015

    The anti-rust treatment of the cradle may be insufficiently thick.As a result the cradle could break due to corrosion, increasing the risk of an accident.

    A12/00958/21 ↗
  • EU Safety Gate2011–2015

    The programming of the ‘Stop & Start’ system is inadequate. This may cause the engine to cut out if the battery charge level is lower than the minimum load threshold required by the ‘Stop & Start’ function. This could…

    Texte complet

    The programming of the ‘Stop & Start’ system is inadequate. This may cause the engine to cut out if the battery charge level is lower than the minimum load threshold required by the ‘Stop & Start’ function. This could increase the risk of an accident.

    A12/0645/19 ↗
  • EU Safety Gate2012–2016

    The axle of the parking brake caliper has not been correctly sealed and might corrode. As a consequence, the parking brake may become less effective or fail completely.

    A12/1485/18 ↗
  • EU Safety Gate2011–2016

    The strut for the hatchback door may be defective. As a result, the door could suddenly drop from a raised position.

    A12/0847/18 ↗
  • EU Safety Gate2012–2015

    Overheating of the engine may occur due to a problem with the engine control software. Overheating of the engine may lead to engine failure.

    A12/0492/18 ↗
  • EU Safety Gate2015, 2016

    An internal component of the door locks could be defective. The defect could prevent a door from being locked or cause a door to open unexpectedly during driving.

    A12/0270/18 ↗
  • EU Safety Gate2014–2016

    There could be a fault with the power relay for the engine control unit. This could lead to the engine stalling while driving.

    A12/0222/18 ↗
  • EU Safety Gate2011–2016

    null Due to corrosion, the dampers of the rear door could break. This could result in the rear door failing to stay in the open position, leading to injuries to the user.

    A12/1523/17 ↗
  • EU Safety Gate2015–2017

    null The cable of the bonnet release is insufficiently secured, which could lead to the bonnet opening unexpectedly whilst driving.

    A12/1339/17 ↗