Compactes
Fiabilité Citroën C4
Sur 135 745 contrôles MOT britanniques, 27,0 % des Citroën C4 ont été recalées pour un défaut mécanique ou de structure. Médiane d’une compacte du même âge et kilométrage : 18,4 %.
- Meilleures années
- —
- Années avec le plus de défaillances
- 2016, 2020, 2021
- Point faible à fort kilométrage
- Carrosserie, châssis et corrosion, Direction, Suspension et roues
- Rappels officiels
- 9 rappels, dont 3 graves
- Taux de défaillance mécanique
- 27,0%
- Médiane de la catégorie, même âge et kilométrage
- 18,4%
- contrôles MOT
- 135 745
- Plaintes aux États-Unis
- 0
Taux de défaillance par année de première immatriculation
Taux de défaillance mécanique au contrôle MOT 2024, par année de première immatriculation, comparé à la médiane de la catégorie au même âge et kilométrage.
| Année | Contrôles | Défaillance mécanique | Médiane catégorie | Tout défaut | Rappels |
|---|---|---|---|---|---|
| 2022 | 297 | 5,1% | 2,1% | 13,1% | 5 |
| 2021 | 5 192 | 6,3% | 2,8% | 17,9% | 2 |
| 2020 | 1 763 | 7,0% | 3,9% | 15,8% | 2 |
| 2019 | 5 173 | 9,1% | 5,1% | 21,1% | 2 |
| 2018 | 2 777 | 11,1% | 6,6% | 23,5% | 2 |
| 2017 | 988 | 16,3% | 9,1% | 26,6% | 3 |
| 2016 | 17 450 | 21,9% | 10,7% | 34,4% | 2 |
| 2015 | 27 531 | 24,2% | 13,5% | 37,7% | 2 |
| 2014 | 20 535 | 31,0% | 19,1% | 42,1% | 1 |
| 2013 | 12 101 | 31,1% | 20,4% | 44,8% | 1 |
| 2012 | 8 400 | 30,3% | 23,0% | 44,6% | 1 |
| 2011 | 6 985 | 33,0% | 26,5% | 45,2% | 1 |
| 2010 | 6 084 | 36,3% | 29,4% | 52,1% | 1 |
| 2009 | 5 093 | 37,7% | 30,4% | 51,9% | 1 |
| 2008 | 7 109 | 38,3% | 33,1% | 53,1% | 0 |
| 2007 | 5 490 | 35,7% | 33,5% | 50,7% | 0 |
| 2006 | 1 809 | 36,2% | 31,8% | 51,2% | 0 |
| 2005 | 921 | 33,1% | 32,5% | 46,8% | 0 |
Ce qui lâche selon le kilométrage
Part des contrôles échoués sur chaque organe. Les pièces d’usure (ampoules, pneus, essuie-glaces, plaques) n’entrent pas dans l’indice de fiabilité.
(…) = Médiane de la catégorie, même âge et kilométrage
Liste de contrôle pour le garagiste avant l’achat
Établie à partir des organes où ce modèle échoue plus que sa catégorie à partir de 100 000 km, et des rappels ouverts.
- Carrosserie et châssis : inspecter bas de caisse, berceaux, points de levage et plancher (corrosion, réparations).
- Direction : jeu de la crémaillère, des biellettes et rotules, fuites d’assistance et bruits en braquage complet.
- Suspension et roues : vérifier triangles, silentblocs, rotules, ressorts et amortisseurs (jeu, fissures, fuites) ; repérer une usure irrégulière des pneus.
- Rappels : demander la preuve que les rappels ouverts de ce modèle ont été traités (le concessionnaire vérifie par VIN).
Rappels officiels
Rappels publiés par la NHTSA (États-Unis) et l’EU Safety Gate qui citent ce modèle. Vérifiez par VIN si une voiture précise est concernée.
There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and…
SR/00841/26 ↗Texte complet
There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and contact between these components can lead to water infiltration, causing an electric arc which may trigger a thermal event, such as overheating. There is a risk of fire.
The rear axle that does not meet specifications may develop cracks and fracture, leading to reduced vehicle control and increasing the risk of accidents and injuries.
SR/00174/26 ↗The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.
SR/02935/25 ↗The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03151/25 ↗Texte complet
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
The airbag may deteriorate over time and if deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.
SR/02977/25 ↗Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02655/25 ↗Texte complet
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
Afficher 3 rappels de plus
The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the…
SR/02103/25 ↗Texte complet
The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the deactivation of stability control due to damage to the pressure sensor. The brake fluid could come into contact with the printed circuit board and result in the deactivation of all control functions (including the anti-lock system and electronic brake force distribution).
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…
SR/01423/25 ↗Texte complet
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.
Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory…
SR/00435/25 ↗Texte complet
Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.