AutoDefects
Deutsch

Citroën C4 2019: Zuverlässigkeit

75% mehr technische Mängel als die Klasse

5.173 MOT-Prüfungen von Citroën C4 mit Erstzulassung 2019: 9,1% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 5,2%.

Technische Mängelquote
9,1%
Klassenmedian, gleiches Alter und gleiche Laufleistung
5,2%
Durchgefallen (jeder Grund)
21,1%
MOT-Prüfungen
5.173
Rückrufe
8

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km1.7815,6%2,9%
50-100k km2.90610,8%5,8%
100-150k km40610,8%9,5%
150k+ km8013,8%11,5%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder1,5%
Bremsen5,1%
Motor, Abgasanlage und Emissionen1,3%
Lenkung0,1%
Karosserie, Rahmen und Rost1,9%
Gurte und Airbags0,3%
Licht und Elektrik (Verschleiß)7,8%
Reifen (Verschleiß)6,2%
Wischer und Scheibe (Verschleiß)3,2%
Sonstiges und Kennzeichen (Verschleiß)0,2%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety Gate2015–2024

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Volltext

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03151/25 ↗
  • EU Safety Gate2017–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Volltext

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02655/25 ↗
  • EU Safety Gate2019–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01876/23 ↗
  • EU Safety Gate2017–2022

    The diesel particle filter may overheat and develop cracks. This could have a negative impact on the environment.

    A12/00270/23 ↗
  • EU Safety Gate2019

    The high-pressure pump has not been tightened to the engine with the correct torque. As a result, fuel may leak onto the road, posing a risk to the following traffic.

    A12/01463/20 ↗
  • EU Safety Gate2018, 2019

    The ballast in the rear part of the vehicle could be absent.This can impair the vehicle's directional stability, increasing the risk of an accident.

    A12/00127/20 ↗
2 weitere Rückrufe anzeigen
  • EU Safety Gate2019

    The left rear brake hose may be in contact with the suspension spring. As a result, the hose will be damaged and brake fluid will leak, reducing the braking performance and increasing the risk of an accident.

    A12/00018/19 ↗
  • EU Safety Gate2019

    The rear axle connection may be inadequate and could break. As a result, the rear axle may be disconnected from the vehicle, increasing the risk of an accident.

    A12/0976/19 ↗