AutoDefects
English

MPVs

Volkswagen Sharan reliability

In 36,808 UK MOT tests, 15.5% of Volkswagen Sharan cars failed for a mechanical or structural defect. The median MPV of the same age and mileage: 18.3%.

84of 100High reliability16% fewer mechanical failures than the class
Best years
2014, 2017, 2018
Years with most failures
2006
Weak spot at high mileage
Nothing stands out against the class
Official recalls
7 recalls, 6 serious
Mechanical failure rate
15.5%
Class median, same age and mileage
18.3%
First MOT (3 years old), 2021
5.9% (6.2%)
MOT tests
36,808
US owner complaints
0

MOT results by test year

The whole fleet of this model at each year’s MOT, against its class at the same age and mileage. Shows whether the model keeps its standing as it ages.

MOT yearTestsMechanical failClass medianAny fail
202436,80815.5%18.3%24.6%
202337,46615.8%18.6%25.3%

Failure rate by year of first registration

Mechanical failure rate at the 2024 MOT, by the year the car was first registered, against the median of its class at the same age and mileage.

This modelClass median
0%17%34%2004: 41.0%2004 Class median: 42.5%042005: 40.7%2005 Class median: 41.0%052006: 45.7%2006 Class median: 41.2%062007: 42.4%2007 Class median: 39.9%072008: 42.2%2008 Class median: 39.5%082009: 39.3%2009 Class median: 38.6%092010: 29.6%2010 Class median: 33.6%102011: 21.3%2011 Class median: 28.9%112012: 20.8%2012 Class median: 25.8%122013: 20.7%2013 Class median: 25.0%132014: 16.4%2014 Class median: 22.8%142015: 15.3%2015 Class median: 17.9%152016: 11.6%2016 Class median: 14.6%162017: 9.7%2017 Class median: 14.0%172018: 7.0%2018 Class median: 10.7%182019: 5.7%2019 Class median: 6.8%192020: 6.7%2020 Class median: 7.1%202021: 5.9%2021 Class median: 6.2%21
YearTestsMechanical failClass medianAny failRecalls
20211,2285.9%6.2%15.1%0
20201,6456.7%7.1%16.5%0
20196,5895.7%6.8%13.1%0
20183,3497.0%10.7%16.3%0
20173,5409.7%14.0%18.5%1
20163,33011.6%14.6%20.3%3
20153,14915.3%17.9%25.7%3
20142,82116.4%22.8%26.4%3
20132,21920.7%25.0%29.9%3
20122,02920.8%25.8%31.6%3
20112,14521.3%28.9%31.8%3
201065529.6%33.6%41.2%3
200948439.3%38.6%49.6%3
200855742.2%39.5%49.9%3
200769442.4%39.9%51.4%2
200662645.7%41.2%55.1%1
200564740.7%41.0%49.5%0
200442241.0%42.5%51.0%0
Older years (3)
YearTestsMechanical failClass medianAny failRecalls
200325342.7%41.5%49.4%0
200217542.3%37.3%49.1%0
20017930.4%34.2%38.0%0

Most common MOT failures

The defects testers recorded most often on this model, in DVSA’s own wording (English), per 1,000 MOT tests.

Defect (DVSA wording)SystemPer 1,000 tests
Pins and bushes: pin or bush excessively wornSuspension and wheels64.9
Condition: has ply or cords exposedTyres (wear)41
tread depth below requirements of 1.6mmTyres (wear)39.4
Position lamp: not workingLights and electrics (wear)23.9
Brake pads: less than 1.5 mm thickBrakes20.4
Condition: has a cut in excess of the requirements deep enough to reach the ply or cordsTyres (wear)19.7
Component mounting prescribed areas: prescribed area excessively corroded significantly reducing structural strengthSuspension and wheels19.1
Linkage ball joint dust cover: ball joint dust cover no longer prevents the ingress of dirtSuspension and wheels17.6
Joints: constant velocity boot split or insecure, no longer prevents the ingress of dirtBody, chassis and corrosion17.1
Malfunction indicator lamp: inoperative or indicates a malfunctionEngine, exhaust and emissions14.8
Wipers: does not clear the windscreen effectivelyWipers and windscreen (wear)14.4
Coil spring: fractured or brokenSuspension and wheels13.6
Headlamp aim: too lowLights and electrics (wear)12.9
Side repeaters: not workingLights and electrics (wear)12.7
Headlamp aim: too highLights and electrics (wear)11.6

What fails, by mileage

Share of MOT tests that failed on each system. Wear items (bulbs, tyres, wipers, plates) are excluded from the reliability score.

System0-50k km50-100k km100-150k km150k+ km
Mechanical fail4.8% (4.7)8.7% (10.4)14.1% (17.4)20.4% (23.9)
Tests3,0677,4737,30518,963
Suspension and wheels1.5% (1.5)4.4% (4.4)8.3% (10.3)13.0% (17.1)
Brakes1.6% (2.1)2.9% (5.3)3.9% (8.3)5.8% (12.7)
Engine, exhaust and emissions1.1% (0.9)0.9% (1.4)2.6% (2.9)4.4% (5.6)
Steering0.2% (0.2)0.2% (0.6)0.4% (2.0)2.1% (4.5)
Body, chassis and corrosion0.2% (0.4)0.7% (1.6)1.8% (3.8)4.9% (7.0)
Seat belts and airbags0.6% (0.3)0.7% (0.6)0.9% (0.9)1.9% (1.7)
Lights and electrics (wear)2.4% (3.3)3.7% (7.9)6.4% (14.3)11.3% (22.0)
Tyres (wear)5.3% (4.4)7.6% (6.0)9.0% (8.2)7.5% (10.0)
Wipers and windscreen (wear)1.5% (3.4)2.1% (3.9)2.3% (4.7)3.0% (6.0)
Other and plates (wear)0.1% (0.1)0.2% (0.2)0.3% (0.3)0.4% (0.5)

(…) = Class median, same age and mileage

Pre-purchase checklist for the mechanic

Built from the systems where this model fails more often than its class at 100,000 km and above, and from open recalls.

  1. Recalls: 5 serious recalls name this model — ask for proof the work was done
    • A12/00923/24 · 2007–2014 · The driver airbag's gas generator may be faulty, resulting in uncontrolled inflation and the release of metal fragments. This increases the…
    • A12/02703/24 · 2006–2017 · The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it can result in fragments from the inflator injuring…
    • A12/01809/23 · 2008–2014 · The propellant can deteriorate due to high humidity and temperature variations. In the event of an accident in which the front airbag is…
    • A12/1365/19 · 2015 · As a result of a production error, a capacitor in the airbag control unit may fail. In rare instances, the control unit may interpret the…
    • A12/0203/18 · 2016 · A welded joint in the gas generator of the front passenger airbag may be faulty. This means that, in the event of an accident, the airbag…

    Check a specific car by its VIN on the official sites: NHTSA (US) · DVSA (UK)

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2007–2014

    The driver airbag's gas generator may be faulty, resulting in uncontrolled inflation and the release of metal fragments. This increases the risk of injuries to the occupants.

    A12/00923/24 ↗
  • EU Safety GateSerious2006–2017

    The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it can result in fragments from the inflator injuring the vehicle's occupants.

    A12/02703/24 ↗
  • EU Safety GateSerious2008–2014

    The propellant can deteriorate due to high humidity and temperature variations. In the event of an accident in which the front airbag is deployed, this could result in fragments from the inflator housing coming loose…

    Full text

    The propellant can deteriorate due to high humidity and temperature variations. In the event of an accident in which the front airbag is deployed, this could result in fragments from the inflator housing coming loose and injuring the vehicle’s occupants.

    A12/01809/23 ↗
  • EU Safety GateSerious2015

    As a result of a production error, a capacitor in the airbag control unit may fail. In rare instances, the control unit may interpret the change in voltage when the capacitor fails as a signal similar to that in a crash…

    Full text

    As a result of a production error, a capacitor in the airbag control unit may fail. In rare instances, the control unit may interpret the change in voltage when the capacitor fails as a signal similar to that in a crash and initiate the unwanted activation of the airbag(s) and/or the belt tensioner(s). Unexpected activation of the airbags may increase the risk of injury to the car occupants.

    A12/1365/19 ↗
  • EU Safety GateSerious2016

    A welded joint in the gas generator of the front passenger airbag may be faulty. This means that, in the event of an accident, the airbag may not deploy properly.

    A12/0203/18 ↗
  • EU Safety Gate2016

    null It is possible that the wheel bolts were not tightened with the correct torque which could result in the loss of the wheel. Also, the running direction of the tyres may not have been taken into account when the…

    Full text

    null It is possible that the wheel bolts were not tightened with the correct torque which could result in the loss of the wheel. Also, the running direction of the tyres may not have been taken into account when the winter tyres were fitted which could have a negative effect on driving stability.

    A12/0256/17 ↗
Show 1 more recalls
  • EU Safety GateSerious2015

    null In the event of the deployment of the side airbag, the casing of the gas generator of the airbag may be damaged and small metal parts may break off and injure the driver or passenger.

    A12/0975/16 ↗