AutoDefects
English

MPVs

Vauxhall / Opel Meriva reliability

In 90,846 UK MOT tests, 26.5% of Vauxhall / Opel Meriva cars failed for a mechanical or structural defect. The median MPV of the same age and mileage: 23.6%.

63of 100Below average13% more mechanical failures than the class
Best years
—
Years with most failures
2015, 2016, 2017
Weak spot at high mileage
Engine, exhaust and emissions, Suspension and wheels, Body, chassis and corrosion
Official recalls
7 recalls, 4 serious
Mechanical failure rate
26.5%
Class median, same age and mileage
23.6%
MOT tests
90,846
US owner complaints
0

MOT results by test year

The whole fleet of this model at each year’s MOT, against its class at the same age and mileage. Shows whether the model keeps its standing as it ages.

MOT yearTestsMechanical failClass medianAny fail
202490,84626.5%23.6%36.8%
2023100,56127.3%23.3%37.4%

Failure rate by year of first registration

Mechanical failure rate at the 2024 MOT, by the year the car was first registered, against the median of its class at the same age and mileage.

This modelClass median
0%16%31%2004: 42.7%2004 Class median: 39.5%042005: 41.2%2005 Class median: 37.7%052006: 42.5%2006 Class median: 36.4%062007: 38.7%2007 Class median: 34.2%072008: 39.5%2008 Class median: 34.0%082009: 36.9%2009 Class median: 31.8%092010: 30.7%2010 Class median: 28.5%102011: 24.9%2011 Class median: 25.7%112012: 22.5%2012 Class median: 22.1%122013: 23.3%2013 Class median: 19.7%132014: 17.9%2014 Class median: 16.4%142015: 17.4%2015 Class median: 12.5%152016: 15.5%2016 Class median: 10.2%162017: 15.8%2017 Class median: 9.4%17
YearTestsMechanical failClass medianAny failRecalls
20174,46515.8%9.4%23.4%2
20166,48215.5%10.2%24.1%3
20158,27217.4%12.5%27.1%4
20147,58517.9%16.4%28.4%4
20137,77323.3%19.7%32.4%2
20128,87822.5%22.1%32.6%2
201114,58324.9%25.7%35.4%2
20109,70830.7%28.5%42.1%2
20095,21936.9%31.8%49.0%1
20085,12439.5%34.0%51.4%1
20074,56338.7%34.2%50.5%1
20063,81542.5%36.4%53.3%1
20052,31441.2%37.7%53.0%1
20041,68342.7%39.5%51.3%1
Older years (1)
YearTestsMechanical failClass medianAny failRecalls
200335541.1%36.2%52.7%1

Most common MOT failures

The defects testers recorded most often on this model, in DVSA’s own wording (English), per 1,000 MOT tests.

Defect (DVSA wording)SystemPer 1,000 tests
Coil spring: fractured or brokenSuspension and wheels94.8
Rigid brake pipes: excessively corrodedBrakes42.6
Position lamp: not workingLights and electrics (wear)36.4
tread depth below requirements of 1.6mmTyres (wear)34.6
Brake pads: less than 1.5 mm thickBrakes34.1
Headlamp aim: projected beam image is obviously incorrectLights and electrics (wear)34.1
Malfunction indicator lamp: inoperative or indicates a malfunctionEngine, exhaust and emissions32.4
Wipers: does not clear the windscreen effectivelyWipers and windscreen (wear)31.6
Condition: has ply or cords exposedTyres (wear)29.5
Pins and bushes: pin or bush excessively wornSuspension and wheels29.2
Stop lamp: not workingLights and electrics (wear)29
Track rod end: ball joint has excessive playSteering28.4
Joints: constant velocity boot split or insecure, no longer prevents the ingress of dirtBody, chassis and corrosion27.9
Washers: provides insufficient washer liquidWipers and windscreen (wear)25.3
Exhaust system: has a major leak of exhaust gasesBody, chassis and corrosion22.1

What fails, by mileage

Share of MOT tests that failed on each system. Wear items (bulbs, tyres, wipers, plates) are excluded from the reliability score.

System0-50k km50-100k km100-150k km150k+ km
Mechanical fail10.6% (7.5)19.6% (15.7)28.5% (25.5)36.8% (35.1)
Tests6,82727,94432,94723,128
Suspension and wheels7.6% (1.5)12.0% (4.4)16.3% (10.3)20.7% (17.1)
Brakes2.0% (2.1)6.2% (5.3)9.9% (8.3)14.2% (12.7)
Engine, exhaust and emissions0.9% (0.9)3.0% (1.4)5.7% (2.9)9.2% (5.6)
Steering0.4% (0.2)1.5% (0.6)3.5% (2.0)5.7% (4.5)
Body, chassis and corrosion0.7% (0.4)2.6% (1.6)5.4% (3.8)9.0% (7.0)
Seat belts and airbags0.4% (0.3)0.6% (0.6)1.0% (0.9)1.5% (1.7)
Lights and electrics (wear)3.5% (3.3)7.2% (7.9)14.5% (14.3)21.5% (22.0)
Tyres (wear)4.5% (4.4)6.0% (6.0)7.9% (8.2)10.0% (10.0)
Wipers and windscreen (wear)2.8% (3.4)4.1% (3.9)5.8% (4.7)7.7% (6.0)
Other and plates (wear)0.1% (0.1)0.2% (0.2)0.3% (0.3)0.6% (0.5)

(…) = Class median, same age and mileage

Pre-purchase checklist for the mechanic

Built from the systems where this model fails more often than its class at 100,000 km and above, and from open recalls.

  1. Engine and exhaust: check for oil and coolant leaks, exhaust leaks and corrosion, warning lights, and (diesel) DPF/EGR faults and smoke.
  2. Suspension and wheels: check arms, bushes, ball joints, springs and shock absorbers for play, cracks and leaks; look for uneven tyre wear.
  3. Body and chassis: inspect sills, subframes, jacking points and the floor for corrosion and previous repairs.
  4. Recalls: 4 serious recalls name this model — ask for proof the work was done
    • SR/02979/25 · 2000–2029 · The structure of the airbag can deteriorate. If the airbags deploy, it could result in fragments from the inflator, injuring the vehicle's…
    • A12/00381/22 · 2010–2018 · A defect in the gas generator of the driver airbag can lead to uncontrolled inflation and the release of metal fragments when the airbag is…
    • A12/0126/17 · 2016 · null Due to a wrong mixing ratio of the primary ignition chemicals in the gas generators, the airbag may not be triggered in the event of…
    • A12/1285/14 · 2014 · null Because of a production fault involving the passenger airbag, there can be a release of hot gas when the bag is deployed. This can…

    Check a specific car by its VIN on the official sites: NHTSA (US) · DVSA (UK)

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2000–2029

    The structure of the airbag can deteriorate. If the airbags deploy, it could result in fragments from the inflator, injuring the vehicle's occupants.

    SR/02979/25 ↗
  • EU Safety GateSerious2010–2018

    A defect in the gas generator of the driver airbag can lead to uncontrolled inflation and the release of metal fragments when the airbag is activated. This defect may increase the risk of injuries in the event of an…

    Full text

    A defect in the gas generator of the driver airbag can lead to uncontrolled inflation and the release of metal fragments when the airbag is activated. This defect may increase the risk of injuries in the event of an accident.

    A12/00381/22 ↗
  • EU Safety GateSerious2016

    null Due to a wrong mixing ratio of the primary ignition chemicals in the gas generators, the airbag may not be triggered in the event of an accident.

    A12/0126/17 ↗
  • EU Safety Gate2014, 2015

    null The engine wiring harness may chafe against the transmission housing which could cause miscellaneous engine failures: the vehicle may not start or the engine may stall during driving.

    A12/1062/15 ↗
  • EU Safety Gate2015

    null The latches of the rear safety belt buckles may open inadvertently in the event of a crash.

    A12/2174/14 ↗
  • EU Safety GateSerious2014

    null Because of a production fault involving the passenger airbag, there can be a release of hot gas when the bag is deployed. This can lead to eye injuries.

    A12/1285/14 ↗
Show 1 more recalls
  • EU Safety Gate

    null Heat treatment of steering rack was not applied correctly during manufacturing. Rack of steering gear may break under high load.

    A12/0649/13 ↗