AutoDefects
English

MPVs

SEAT Alhambra reliability

In 27,372 UK MOT tests, 15.8% of SEAT Alhambra cars failed for a mechanical or structural defect. The median MPV of the same age and mileage: 18.3%.

83of 100High reliability14% fewer mechanical failures than the class
Best years
2014, 2017, 2018
Years with most failures
2007, 2009, 2020
Weak spot at high mileage
Nothing stands out against the class
Official recalls
5 recalls, 5 serious
Mechanical failure rate
15.8%
Class median, same age and mileage
18.3%
MOT tests
27,372
US owner complaints
0

MOT results by test year

The whole fleet of this model at each year’s MOT, against its class at the same age and mileage. Shows whether the model keeps its standing as it ages.

MOT yearTestsMechanical failClass medianAny fail
202427,37215.8%18.3%25.8%
202328,80315.7%17.6%25.7%

Failure rate by year of first registration

Mechanical failure rate at the 2024 MOT, by the year the car was first registered, against the median of its class at the same age and mileage.

This modelClass median
0%17%34%2004: 42.9%2004 Class median: 43.0%042005: 39.3%2005 Class median: 41.7%052006: 41.8%2006 Class median: 41.5%062007: 46.1%2007 Class median: 40.3%072008: 42.7%2008 Class median: 39.9%082009: 44.4%2009 Class median: 38.8%092010: 29.9%2010 Class median: 33.8%102011: 26.1%2011 Class median: 30.2%112012: 23.3%2012 Class median: 27.1%122013: 21.1%2013 Class median: 25.4%132014: 16.7%2014 Class median: 22.9%142015: 13.9%2015 Class median: 17.8%152016: 12.0%2016 Class median: 14.5%162017: 9.9%2017 Class median: 13.4%172018: 7.1%2018 Class median: 10.4%182019: 7.2%2019 Class median: 6.9%192020: 8.3%2020 Class median: 6.6%20
YearTestsMechanical failClass medianAny failRecalls
20208238.3%6.6%16.3%0
20192,7497.2%6.9%16.4%0
20182,5367.1%10.4%16.7%0
20175,9839.9%13.4%20.1%1
20164,17012.0%14.5%22.1%1
20152,16113.9%17.8%25.5%2
20141,85516.7%22.9%28.4%0
20131,53921.1%25.4%32.0%1
20121,41223.3%27.1%34.3%1
20111,20926.1%30.2%35.1%0
201035529.9%33.8%42.3%1
200933144.4%38.8%53.5%1
200847142.7%39.9%51.2%0
200742146.1%40.3%56.8%0
200634041.8%41.5%47.7%0
200526539.3%41.7%48.3%0
200433842.9%43.0%50.9%0
Older years (2)
YearTestsMechanical failClass medianAny failRecalls
200320544.4%42.1%50.2%0
20028836.4%37.7%45.5%0

Most common MOT failures

The defects testers recorded most often on this model, in DVSA’s own wording (English), per 1,000 MOT tests.

Defect (DVSA wording)SystemPer 1,000 tests
Pins and bushes: pin or bush excessively wornSuspension and wheels72
Condition: has ply or cords exposedTyres (wear)52.9
tread depth below requirements of 1.6mmTyres (wear)37.7
Condition: has a cut in excess of the requirements deep enough to reach the ply or cordsTyres (wear)24.1
Position lamp: not workingLights and electrics (wear)22.2
Brake pads: less than 1.5 mm thickBrakes22.2
Component mounting prescribed areas: prescribed area excessively corroded significantly reducing structural strengthSuspension and wheels19.8
Malfunction indicator lamp: inoperative or indicates a malfunctionEngine, exhaust and emissions18
Coil spring: fractured or brokenSuspension and wheels15.8
Linkage ball joint dust cover: ball joint dust cover no longer prevents the ingress of dirtSuspension and wheels14.8
Headlamp aim: too lowLights and electrics (wear)14.7
Joints: constant velocity boot split or insecure, no longer prevents the ingress of dirtBody, chassis and corrosion14.7
Wipers: does not clear the windscreen effectivelyWipers and windscreen (wear)14.4
Side repeaters: not workingLights and electrics (wear)12.1
Headlamp aim: too highLights and electrics (wear)10.7

What fails, by mileage

Share of MOT tests that failed on each system. Wear items (bulbs, tyres, wipers, plates) are excluded from the reliability score.

System0-50k km50-100k km100-150k km150k+ km
Mechanical fail5.9% (4.8)9.1% (10.1)13.1% (16.1)22.1% (25.8)
Tests1,8366,3916,68212,463
Suspension and wheels1.6% (1.5)4.4% (4.4)7.6% (10.3)14.0% (17.1)
Brakes2.3% (2.1)3.3% (5.3)3.7% (8.3)6.7% (12.7)
Engine, exhaust and emissions1.0% (0.9)1.0% (1.4)2.4% (2.9)4.6% (5.6)
Steering0.2% (0.2)0.2% (0.6)0.4% (2.0)2.1% (4.5)
Body, chassis and corrosion0.7% (0.4)0.6% (1.6)1.1% (3.8)5.1% (7.0)
Seat belts and airbags0.9% (0.3)0.9% (0.6)0.8% (0.9)1.6% (1.7)
Lights and electrics (wear)2.7% (3.3)3.6% (7.9)5.8% (14.3)10.7% (22.0)
Tyres (wear)4.5% (4.4)8.8% (6.0)10.8% (8.2)9.0% (10.0)
Wipers and windscreen (wear)1.5% (3.4)2.0% (3.9)2.6% (4.7)3.3% (6.0)
Other and plates (wear)0.2% (0.1)0.2% (0.2)0.3% (0.3)0.5% (0.5)

(…) = Class median, same age and mileage

Pre-purchase checklist for the mechanic

Built from the systems where this model fails more often than its class at 100,000 km and above, and from open recalls.

  1. Recalls: 5 serious recalls name this model — ask for proof the work was done
    • A12/02776/24 · 2012, 2013 · The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator…
    • A12/01630/24 · 2009, 2010 · The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator…
    • A12/00148/20 · 2015 · A condenser of the airbag control unit might have an insufficient thermal treatment. Consequently, the condenser might fail which could…
    • A12/0300/18 · 2016, 2017 · The passenger airbag module may have been produced with an inadequate welded connection between the detonator and generator. In the event…
    • A12/0272/16 · 2015 · null There is the possibility that the gas generator casing could be damaged when the side airbag is deployed. If small metal particles…

    Check a specific car by its VIN on the official sites: NHTSA (US) · DVSA (UK)

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2012, 2013

    The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.

    A12/02776/24 ↗
  • EU Safety GateSerious2009, 2010

    The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.

    A12/01630/24 ↗
  • EU Safety GateSerious2015

    A condenser of the airbag control unit might have an insufficient thermal treatment. Consequently, the condenser might fail which could lead the airbag control unit to detect a non occurring frontal collision and…

    Full text

    A condenser of the airbag control unit might have an insufficient thermal treatment. Consequently, the condenser might fail which could lead the airbag control unit to detect a non occurring frontal collision and trigger the airbags and seatbealt tensioners, increasing the risk of an accident.

    A12/00148/20 ↗
  • EU Safety GateSerious2016, 2017

    The passenger airbag module may have been produced with an inadequate welded connection between the detonator and generator. In the event of an accident, the airbag may not deploy correctly, reducing the protection of…

    Full text

    The passenger airbag module may have been produced with an inadequate welded connection between the detonator and generator. In the event of an accident, the airbag may not deploy correctly, reducing the protection of the passenger.

    A12/0300/18 ↗
  • EU Safety GateSerious2015

    null There is the possibility that the gas generator casing could be damaged when the side airbag is deployed. If small metal particles come away from the casing when the side airbag is deployed, they could harm the…

    Full text

    null There is the possibility that the gas generator casing could be damaged when the side airbag is deployed. If small metal particles come away from the casing when the side airbag is deployed, they could harm the driver or the passenger.

    A12/0272/16 ↗