AutoDefects
English

MPVs

Škoda Roomster reliability

In 18,373 UK MOT tests, 24.7% of Škoda Roomster cars failed for a mechanical or structural defect. The median MPV of the same age and mileage: 25.9%.

75of 100Average5% fewer mechanical failures than the class
Best years
2010, 2013, 2014
Years with most failures
2006
Weak spot at high mileage
Body, chassis and corrosion, Suspension and wheels, Brakes
Official recalls
5 recalls, 5 serious
Mechanical failure rate
24.7%
Class median, same age and mileage
25.9%
MOT tests
18,373
US owner complaints
0

MOT results by test year

The whole fleet of this model at each year’s MOT, against its class at the same age and mileage. Shows whether the model keeps its standing as it ages.

MOT yearTestsMechanical failClass medianAny fail
202418,37324.7%25.9%35.1%
202319,24322.7%25.1%33.3%

Failure rate by year of first registration

Mechanical failure rate at the 2024 MOT, by the year the car was first registered, against the median of its class at the same age and mileage.

This modelClass median
0%16%33%2006: 44.7%2006 Class median: 40.0%062007: 38.7%2007 Class median: 37.5%072008: 36.1%2008 Class median: 36.5%082009: 32.5%2009 Class median: 34.2%092010: 25.2%2010 Class median: 29.7%102011: 24.5%2011 Class median: 25.4%112012: 22.5%2012 Class median: 22.5%122013: 17.3%2013 Class median: 20.4%132014: 14.3%2014 Class median: 16.9%142015: 12.3%2015 Class median: 13.3%15
YearTestsMechanical failClass medianAny failRecalls
20151,71012.3%13.3%20.8%3
20142,76114.3%16.9%23.8%4
20132,65017.3%20.4%26.7%3
20122,39722.5%22.5%33.1%3
20111,54224.5%25.4%34.4%1
20101,30425.2%29.7%38.2%0
20091,13432.5%34.2%44.3%0
20082,07836.1%36.5%47.8%0
20072,40938.7%37.5%50.1%0
200638344.7%40.0%54.1%0

Most common MOT failures

The defects testers recorded most often on this model, in DVSA’s own wording (English), per 1,000 MOT tests.

Defect (DVSA wording)SystemPer 1,000 tests
Position lamp: not workingLights and electrics (wear)58.3
Joints: constant velocity boot split or insecure, no longer prevents the ingress of dirtBody, chassis and corrosion56.5
Pins and bushes: pin or bush excessively wornSuspension and wheels45.8
Coil spring: fractured or brokenSuspension and wheels39.7
Individual direction indicators: incorrect colourLights and electrics (wear)37.8
tread depth below requirements of 1.6mmTyres (wear)32.5
Stop lamp: not workingLights and electrics (wear)29.8
Service brake performance: excessively bindingBrakes29.7
Condition: has ply or cords exposedTyres (wear)26.3
Brake discs: significantly and obviously wornBrakes24.7
Wipers: does not clear the windscreen effectivelyWipers and windscreen (wear)24.5
Brake pads: less than 1.5 mm thickBrakes22.5
Linkage ball joint dust cover: ball joint dust cover no longer prevents the ingress of dirtSuspension and wheels22.3
Headlamp: not working on dipped beamLights and electrics (wear)21.6
Rbt (sp): efficiency below requirementsBrakes19.7

What fails, by mileage

Share of MOT tests that failed on each system. Wear items (bulbs, tyres, wipers, plates) are excluded from the reliability score.

System0-50k km50-100k km100-150k km150k+ km
Mechanical fail7.1% (8.7)13.1% (15.9)23.0% (24.9)36.4% (35.9)
Tests1,0364,6525,7136,972
Suspension and wheels4.2% (1.5)6.7% (4.4)10.8% (10.3)19.0% (17.1)
Brakes1.6% (2.1)4.6% (5.3)8.4% (8.3)14.4% (12.7)
Engine, exhaust and emissions0.7% (0.9)1.1% (1.4)2.8% (2.9)5.4% (5.6)
Steering0.2% (0.2)0.7% (0.6)1.9% (2.0)5.8% (4.5)
Body, chassis and corrosion1.1% (0.4)2.6% (1.6)6.9% (3.8)11.8% (7.0)
Seat belts and airbags0.4% (0.3)0.5% (0.6)0.9% (0.9)2.4% (1.7)
Lights and electrics (wear)3.3% (3.3)6.7% (7.9)13.2% (14.3)22.6% (22.0)
Tyres (wear)3.1% (4.4)5.3% (6.0)6.6% (8.2)10.1% (10.0)
Wipers and windscreen (wear)2.9% (3.4)3.0% (3.9)3.3% (4.7)5.1% (6.0)
Other and plates (wear)0.0% (0.1)0.1% (0.2)0.2% (0.3)0.4% (0.5)

(…) = Class median, same age and mileage

Pre-purchase checklist for the mechanic

Built from the systems where this model fails more often than its class at 100,000 km and above, and from open recalls.

  1. Body and chassis: inspect sills, subframes, jacking points and the floor for corrosion and previous repairs.
  2. Suspension and wheels: check arms, bushes, ball joints, springs and shock absorbers for play, cracks and leaks; look for uneven tyre wear.
  3. Brakes: measure discs and pads, check brake pipes and hoses for corrosion, and test the handbrake and ABS warning light.
  4. Recalls: 5 serious recalls name this model — ask for proof the work was done
    • SR/01853/26 · 2016, 2017 · The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator…
    • SR/00680/26 · 2014–2016 · A defect in the inflator of the driver airbag may cause uncontrolled inflation and the release of metal fragments when the airbag is…
    • A12/02080/24 · 2012–2014 · The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator…
    • A12/00787/23 · 2012–2017 · The airbag may deteriorate over time and if deployed, excessive internal pressure may cause the inflator body to burst and metal fragments…
    • A12/1741/14 · 2011–2015 · null Vibration can be transmitted to the fuel filter cover because of the pressure pulsations in the fuel lines. This can crack the filter…

    Check a specific car by its VIN on the official sites: NHTSA (US) · DVSA (UK)

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2016, 2017

    The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.

    SR/01853/26 ↗
  • EU Safety GateSerious2014–2016

    A defect in the inflator of the driver airbag may cause uncontrolled inflation and the release of metal fragments when the airbag is activated, causing injury to the occupants.

    SR/00680/26 ↗
  • EU Safety GateSerious2012–2014

    The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.

    A12/02080/24 ↗
  • EU Safety GateSerious2012–2017

    The airbag may deteriorate over time and if deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.

    A12/00787/23 ↗
  • EU Safety GateSerious2011–2015

    null Vibration can be transmitted to the fuel filter cover because of the pressure pulsations in the fuel lines. This can crack the filter cover in the area of the supply neck and result in fuel leaks. This could cause…

    Full text

    null Vibration can be transmitted to the fuel filter cover because of the pressure pulsations in the fuel lines. This can crack the filter cover in the area of the supply neck and result in fuel leaks. This could cause an accident of the vehicle or of a following one.

    A12/1741/14 ↗