Toyota Yaris 2014: надійність
29 045 техоглядів Toyota Yaris першої реєстрації 2014 року: 11,0% не пройшли через механічний дефект; медіана класу того ж віку й пробігу — 20,1%.
- Відмови через механіку
- 11,0%
- Медіана класу, той самий вік і пробіг
- 20,1%
- Не пройшли MOT (будь-яка причина)
- 24,2%
- техоглядів MOT
- 29 045
- Відкликання
- 6
Що ламається залежно від пробігу
| Пробіг | Техогляди | Механічні відмови | Медіана класу |
|---|---|---|---|
| 0-50k km | 3 981 | 6,0% | 8,7% |
| 50-100k km | 12 904 | 9,5% | 17,6% |
| 100-150k km | 8 637 | 12,9% | 24,5% |
| 150k+ km | 3 523 | 17,5% | 30,8% |
Що ламається в цьому році випуску
Офіційні відкликання
Відкликання, опубліковані NHTSA (США) та EU Safety Gate, у яких названо цю модель. Чи стосується це конкретного авто, перевіряйте за VIN.
The wire harnesses of the side airbag sensors could crack and the wires may corrode. In the event of a crash the front seat airbags and the curtain shield airbags may not deploy, increasing the risk of injury.
A12/0734/19 ↗null A fault in the gas generator of the driver airbag could cause uncontrolled inflation of the airbag when activated, leading to an increased risk of injury.
A12/1042/17 ↗The affected vehicles may have been manufactured with a roof headliner that does not provide the proper occupant protection in the event of a crash. As such, these vehicles fail to comply with the requirements of…
15V134000 ↗Повний текст
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2012-2015 Yaris vehicles manufactured August 31, 2011, to February 9, 2015, and sold or registered in Puerto Rico. The affected vehicles may have been manufactured with a roof headliner that does not provide the proper occupant protection in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 201, " Occupant Protection in Interior Impact."
null There is a possibility that one or more of the rear axle bearing bolts could have been tightened insufficiently during the manufacturing process. In this condition, the bolt(s) could become loose during vehicle…
A12/0276/15 ↗Повний текст
null There is a possibility that one or more of the rear axle bearing bolts could have been tightened insufficiently during the manufacturing process. In this condition, the bolt(s) could become loose during vehicle operation and could eventually detach. The detached bolt(s) could damage rear brake components during rotation, resulting in a reduction of brake performance or a potential wheel lock up, which could increase the risk of a crash.
null The brake reservoir tank is designed for left hand drive Yaris hybrid vehicles. Due to the design of the chamber divider in the reservoir tank which separates the front and rear brake fluid lines, both front and…
A12/0235/15 ↗Повний текст
null The brake reservoir tank is designed for left hand drive Yaris hybrid vehicles. Due to the design of the chamber divider in the reservoir tank which separates the front and rear brake fluid lines, both front and rear brake system functionality may be lost in the event that brake fluid leaks from the front brake system. This could lead to a crash.
null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler. Under certain driving conditions, the oil may flow into the combustion chamber and might cause engine damage,…
A12/1918/14 ↗Повний текст
null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler. Under certain driving conditions, the oil may flow into the combustion chamber and might cause engine damage, which may increase the risk of a fire in the engine compartment due to leaked oil.